• 대한화학회지
• /
• 제20권6호
• /
• pp.525-532
• /
• 1976

CO2/KOH catalysis에 의해 2-pyrrolidone과 ${\varepsilon}$-caprolactam의 음이온 중합을 시도하였으며 이 polymer의 물리적 성질을 조사하였다. 2-Pyrrolidone 중합의 경우는, KOH의 농도가 8mole%이상이고 $CO_2/KOH$ mole ratio가 0.45일 때 percent conversion이 가장 높았으며 $50^{\circ}C$가 최적의 온도임을 알았다. ${\varepsilon}$-Carprolactam의 중합에 있어서는 80 ∼ $90^{\circ}C$에서 percent conversion이 낮았고, 150 ∼ $180^{\circ}C$의 온도에서는$ CO_2/KOH$ mole ratio에 크게 관계없이 높은 percent conversion을 얻을 수 있었다. 이들 polymer의 고유점도는 대략 2.0 ∼ 5.0dl/g의 높은 값이었다.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.2-9
• /
• 2013

rac-$Et(Ind)_2ZrCl_2$ 메탈로센 촉매와 메틸알루미늄옥산 공촉매를 이용하여 polyethylene, poly(ethylene-co-1-decene), poly(ethylene-co-p-methylstyrene) 및 poly(ethylene-ter-1-decene-ter-p-methystyrene)를 합성하였다. $^{13}C$ NMR과 $^1H$ NMR 및 FT-IR을 이용하여 삼원공중합체의 특성을 분석하였다. 삼원공중합의 최적조건을 확립하기 위해 동일한 중합조건을 유지한 채 촉매량, 공촉매/촉매 몰비, 중합 시간 및 중합 온도를 변경하여 실험하였다. 촉매량이 증가할수록 삼원공중합체의 촉매활성도 및 중량평균분자량은 증가하였으나, 중합시간이 30분을 초과하자 촉매활성도는 감소하였다. 공촉매/촉매 몰비를 증가시킨 결과 중량평균분자량은 감소하였고, 촉매활성도는 어느 정도 증가하였다. 촉매활성도는 중합온도가 증가함에 따라 상승하였으나 중량평균 분자량은 감소하였다.

• 멤브레인
• /
• 제27권6호
• /
• pp.506-510
• /
• 2017

계면중합법은 혼합되지 않은 두 용액에 용해되어 있는 반응성 단량체들이 계면에서 중합되는 기술로 다양한 분야에 응용되고 있다. 이 중, 수처리 분리막의 경우 m-phenylene diamine과 Trimesoyl chloride를 반응물로 사용하고 있다. 분리막의 성능은 다양한 중합 성능에 의해 영향을 받고 있으며, 본 연구에서는 유기 용액의 퍼짐 속도가 어떻게 분리막 표면 및 구조에 영향을 주는지를 주사전자현미경을 통해 고찰하였다. 퍼짐 속도는 7.6과 25 mm/sec로 조절하였으며, 유기상 용액은 1~3방울까지 조절하였다. 관찰된 결과는 퍼짐 속도가 7.6 mm/sec에서는 한 방울 떨어트릴 경우, 25 mm/sec에서는 두 방울 떨어트릴 경우 폴리아마이드 막에 균열을 발견할 수 없었다. 반면 나머지 경우에 모두 균열이 발생하였다. 따라서, 초기 유기용액의 퍼짐 속도는 폴리아마이드 분리막의 성능에 영향을 줄 것으로 관찰되었다.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1027-1034
• /
• 2010

상온경화 주형용으로 사용되는 상업적 폴리우레탄 수지에 평균 입자크기가 ${\mu}m$ 및 nm 크기의 서로 다른 무기물 파우더를 충전하여 만든 폴리우레탄 복합수지의 중합반응 및 분해반응 특성을 살펴보고 기계적물성의 변화를 연구하였다. 중합반응의 경우, 평균입자크기가 약 $0.5{\mu}m$로서 상대적으로 입경이 큰 Ce500 무기분말을 사용한 충전하는 경우에는 충전량이 많아질수록 최고 반응 속도점의 반응온도는 상대적으로 낮아지는 것으로 나타나는 반면, 나노두께크기의 MMT 충전제를 사용하는 경우에는 충전 함량에는 큰 차이가 없이 최고반응온도가 높아지면서 반응속도도 빨라지는 거동을 보였다. 또한 TGA 열중량 시험결과에 대하여 Kissinger method를 이용하여 분석한 결과로서 Ce500-복합체의 경우에는 분해반응의 활성화 에너지가 139.34 kJ/mol이었고 MMT-복합체의 경우에는 91.12 kJ/mol로 나타났으며 이로부터 MMT 분말의 분해촉매 효과를 확인할 수 있었다. 한편, 인장강도는 5phr 정도의 소량 충전함량에서는 별 변화를 보이지 않으나 그 이상의 함량에서는 MMT가 충전된 샘플의 강도 증가 현상이 뚜렷이 나타났다.

• Advances in materials Research
• /
• 제6권3호
• /
• pp.303-316
• /
• 2017

In this article, novel olefin polymerization catalyst with lower cost and simple synthetic process were developed, $ArOTiCl_3$ complexes [$(2-OMeC_6H_4O)TiCl_3(C1)$, $(2,4-Me_2C_6H_3O)TiCl_3(C2)$, $TiCl_3(1,4-OC_6H_4O)TiCl_3(C3)$, $TiCl_3(1,4-OC_6H_2O-Me_2-2,5)$ $TiCl_3(C4)$] and corresponding $(ArO)_2TiCl_2$ complexes [$TiCl_2(OC_6H_4-OMe-2)_2(C5)$ and $TiCl_2(OC_6H_3-Me_2-2,6)_2(C6)$] have been synthesized by the reaction of $TiCl_4$ with phenol, all these complexes were well characterized with $^1H$ NMR, $^{13}C$ NMR, MASS and EA. When combined with methylaluminoxane (MAO), the $ArOTiCl_3/MAO$ system shows high activity for ethylene copolymerization with 1-octene and copolymer was obtained with broaden molecular weight distribution (MWD). The $^{13}C$ NMR result of polymer indicates that the 1-octene incorporation in polymer reached up to 8.29 mol%. The effects of polymerization temperature, concentration of polymerization monomer and polymerization time on the catalytic activity have been investigated.

• 폴리머
• /
• 제39권1호
• /
• pp.165-168
• /
• 2015

하이드록시 그룹을 지닌 온도민감형 고분자들이 원자전이라디칼중합법(ATRP)과 클릭반응(click reaction)에 의해 합성되어졌다. 고분자들의 분자량과 분자량 분포도는 gel permeation chromatography(GPC)에 의하여 얻어졌고, 고분자들의 분자량은 잘 제어되었으며 분자량 분포도도 낮게 유지되었다. 클릭반응의 효율은 $^1H$ NMR spectroscopy에 의해 얻어졌으며, 높은 효율을 나타내었다. 고분자 사슬 곁가지의 아민 그룹의 종류와, 치환된 알코올 그룹의 종류에 따라 저임계 용액 온도(LCST)의 제어가 가능했다.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2694-2698
• /
• 2014

A multisegmented polystyrene (PS) with pH-cleavable ester and carbamate linkages was successfully synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry). ATRP was employed to synthesize polystyrene from hydroxyl-terminated initiator using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) as the catalyst. The reaction of the resulting PS with sodium azide yielded the azido-terminated polymer. The hydroxyl group in the other end of the polymer was reacted with 4-nitrophenyl chloroformate (NPC), followed by reaction with propargylamine to produce an alkyne end group with a carbamate linkage. The PS with an alkyne group in one end and an azide group in the other end was then self-coupled in the presence of CuBr/2,2'-bipyridyl (bpy) in DMF to yield a desired multisegmented PS. Molecular weight and molecular weight distribution of the self-coupled polymer increased with time, as in the typical step-growth-type polymerization processes. Finally, we demonstrated that the ester and carbamate linkages of the multisegmented PS were hydrolyzed in the presence of HCl to yield individual PS chains.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.539-553
• /
• 2016

As a novel hydrophobic monomer, polytetrahydrofuran diacrylate (PTMGDA) was synthesized by the esterification reaction between polyethylene tetrahydrofuran (PTMG) and acryloyl chloride (AC). In situ free radical polymerization reaction method was utilized to fabricate poly (vinylidene fluoride) (PVDF)-PTMGDA-poly(ethylene oxide) dimethacrylate (PEGMA) ulrafiltration (UF) membranes. The performances of PVDF-PTMGDA-PEGMA UF membranes in terms of morphologies, mechanical properties, separation properties and hydrophilicities were investigated. The introduction of the PTMGDA-PEGMA dopants not only increased the membranes' pure water flux, but also improved their mechanical properties and the dynamic contact angles. The addition of the PTMGDA/PEGMA dopants led to the formation of the finger-like structure in the membrane bulk. With the increase concentration of PTMGDA/PEGMA dopants, the porosity and the mean effective pore size increased. Those performances were coincide with the physicochemical properties of the casting solutions.

• Elastomers and Composites
• /
• 제11권1호
• /
• pp.54-62
• /
• 1976

It has been studied the graft copolymerization of glycidyl-methacrylate monomer containing two functional groups (vinyl- & epoxyl-) to chloroprene rubber. The reaction occured in the manner of chain transfer mechanism was carried out by means of solution polymerization in toluene in the presence of benzoyl peroxide as the radical initiator. The graft copolymer obtained from this work was analyzed by using IR spectrum, and the physical properties of the polymer such as the thermal behavior were also studied according to TG-DTA methods, and the potency of adhesiveness for the purpose of commercial application was investigated. Experimental results for the graft copolymerization are summarized as follows. 1) A small amount of initiator (0.5%) and 50% of monomer showed the best result for the grafting of monomer to the polymer chain of rubber while the 15% of rubber solution was found to be most suitable to raise either for the grafting ratio or the polymerization ratio. 2) Optimum temperature for better yield of graft copolymer was proved to he at $75^{\circ}C\sim80^{\circ}C$ while those of reaction time was to be $1\sim2$ hours.

• 융복합기술연구소 논문집
• /
• 제12권1호
• /
• pp.13-18
• /
• 2022

Polyacrylonitrile was synthesized through suspension polymerization and then sieved to obtain spherical beads with a size of 200~510 ㎛. PAN was copolymerized with 2 mol% MMA monomer which is known to promote cyclization and crosslinking of nitrile group. The resonance cyclization reaction of the nitrile group in the synthesized PAN beads was observed near 170℃ with thermal analysis and FT-IR. The reaction conversion of the nitrile group in spherical beads was 23% during heat treatment, which was lower than that of the well-oriented PAN fiber used as a precursor of carbon fiber. This is because the stereo-regularity of molecular chains in the form of a random coil (spherical bead) is much lower than that of PAN fiber. It was confirmed that the compressive strength of the spherical PAN bead was greatly improved through the resonance cyclization and shrinkage according to the heat treatment, and it was also observed that the pores in PAN beads were formed after the heat treatment.