• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.61-65
• /
• 2003

Silybin is the main component of Cardus marianus extracts originated from Silybum marianum and has a hepato-protective effect. It is a water-insoluble compound and poorly absorbed from the gastrointestinal tract, resulting in very low oral bioavailability(BA). Polymeric mixed-micelle precursor formulation was made to enhance the dissolution rate of silybin, showing the results of pH-independent release profile with increased dissolution. Oral BA of different preparations in rats was evaluated, revealing that the new formulation showed increased BA more than 2-fold and 4-fold compared to the marketed product and Cardus marianus extracts itself, respectively.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.705-711
• /
• 1991

Alumina precursor sol was obtained by the reaction of Al(OC4H9)3 and acetylacetone in the solvent followed by the partial hydrolysis. This sol was measured by viscosity and the effect of pH. The powders obtained from this sol were calcined at the various temperatures. The transition of crystals and crystal state were investigated at the various temperatures. The powders dried at 90$^{\circ}C$ showed amorphous and ${\gamma}$-Al2O3 at 900$^{\circ}C$, ${\alpha}$-Al2O3 mono-phase at 1050$^{\circ}C$ respectively. As a result of Al27-MASNMR analysis, amorphous and ${\alpha}$-Al2O3 powders showed 6-coordinated Al, ${\gamma}$-Al2O3 4-coordinated Al respectively.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.188-191
• /
• 2004

Carbon molecular sieve (CMS) membranes have superior gas permeation and separation performance compared with polymeric membranes$^{1.3}$ . Up to now, CMS membranes mostly have been mostly focused on the kinds of precursor and pyrolysis condition (pyrolysis temperature, heating rate, pyrolysis atmosphere).(omitted)

• Carbon letters
• /
• 제8권2호
• /
• pp.134-136
• /
• 2007

In this work, activated carbons (ACs) were prepared from polystyrene-based cation-exchangeable resin (PSI) by a chemical activation with KOH as an activating agent. The surface morphologies were observed by using SEM, and the textural properties were investigated by using nitrogen adsorption at 77 K. From the experimental results, it was found that the well-developed micro- and mesopores were produced by a chemical activation, and the textural properties including specific surface areas and pore volumes were greatly enhanced. The electrochemical behaviors of the ACs showed similar phenomena with that of textural properties. These results indicated that KOH activation played an important role in the changes of surface, and pore structures, resulting in enhancing the electrochemical properties of the ACs prepared in present work.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.837-841
• /
• 2003

Duplex microstructure of zirconia and alumina has been achieved via an organic-inorganic solution technique. Zirconium 2,4-pentanedionate, aluminum nitrate and polyethylene glycol were dissolved in ethyl alcohol without any precipitation. The organicinorganic precursor gels were turned to porous powders having volume expansion through explosive, exothermic reaction during drying process. The volume expansion was caused by abrupt decomposition of the organic groups in the gels during the vigorous exothermic reaction. The volume expanded, porous powders were crystallized and densified at 1500$^{\circ}C$ for 1 h. At the optimum amount of the PEG polymer, the metal cations were well dispersed in the solution and a homogeneous polymeric network was formed. The polymer content also affected on the specific surface area of the synthesized powder and the grain size of the sintered composite.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.358-361
• /
• 2007

Well-ordered mesoporous SiCBN ceramics have been successfully synthesized by infiltrating a polymeric precursor, which was prepared from borazine and 2,4,6-trimethyl-2,4,6-trivinylcyclotrisilazane via a hydroboration reaction, into a mesoporous carbon (CMK-3) as a hard template. This was followed by pyrolysis at $1400^{\circ}C$ under nitrogen gas and subsequent oxidative removal of the carbon template without chemical etching. The prepared mesoporous SiCBN ceramic was characterized by a small-angle XRD, TEM, and BET surface area. The resulting mesoporous SiCBN ceramic revealed a BET surface area of $275 m^2g^{-1}$ and a pore volume of $0.8 cm^3 g$ with no crystallization.

• 연구논문집
• /
• 통권24호
• /
• pp.81-96
• /
• 1994

To investigate failure mechanisms observed in carbon-phenolic thermal insulators, differential equations which govern the decomposition process in a deformable anisotropic porous solid are derived for three-dimensional axisymmetric constructions. The governing equations not only couple the material deformation with pore pressure, but also couple pressure and temperature, which means that heat convected by the pyrolysis gases is properly accounted for. Then the Bubnov-Galerkin finite element method is applied to these equations to transform them into a semidescrete finite element system. A thermal insulation liner in the cowl region under typical operating conditions is analyzed to find a mechanism for plylift. The results from the structural analysis show across-ply failure in the cowl zone. The mechanism for plylift is hypothesized as a sequential procedure : 1) the across-ply failure which is the precursor to plylift and 2) the local fiber buckling caused by generation of excessive in-plane compressive stress. To prevent plylift, the across-ply stress can be reduced by using appropriate material ply angles in cowl zone design.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.312.1-312.1
• /
• 2003

Silybin is the main component of Cardus marianus extracts (Silymarin) originated from Silybum marianum, called as milk thistle. It has a hepato-protective effect and is used clinically for the treatment of liver disease. But it is water-insoluble and is poorly absorbed from the gastrointestinal tract, resulting in very low oral bioavailability. Polymeric mixed-micelle precursor formulation containing surfactants, co-solvents, and block-co polymers with Cardus marianus extracts was made to enhance the dissolution rate of silybin and encapsulated with soft gelatin capsule. (omitted)

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.133-137
• /
• 2002

착체중합법을 사용하여 nano-size의 $ZnWO_4$ powder를 저온에서 합성하였다. 금속이온물질로서 zinc acetate와 tungstic acid를 사용하였으며 용매는 de-ionized water를 사용하였다. $300^{\circ}C$ 부터 $600^{\circ}C$의 온도 영역에서 하소한 분말에 대해 열분해 및 결정화 과정, 분말의 형상, 입도 변화 양상을 분석하였다. 일반적인 고상합성 시에 필요한 온도보다 현저히 낮은 온도인 $400^{\circ}C$에서 $ZnWO_4$상이 생성되었으며, $600^{\circ}C$에서 완전한 결정상을 얻을 수 있었다. 합성된 분말은 $400^{\circ}C$에서 원형과 silk-worm 형태가 혼합된 입자 형상을 나타내었고 $500^{\circ}C$에서 보다 균질한 양상을 나타내었다. 합성된 분말의 입자 크기는 $400^{\circ}C$~$600^{\circ}C$의 온도영역에서 17.62~24.71 nm 정도로 매우 미세하였으며, 하소 온도가 증가함에 따라 분말의 결정상과 입도가 증가하는 것을 확인하였다.

• 분석과학
• /
• 제28권6호
• /
• pp.370-376
• /
• 2015

Priority pollutant이며 페놀성화합물의 전구체인 페놀을 고체상추출법을 이용하여 추출 정제하여 형광검출기와 질량분석기가 각각 장착된 고속액체크로마토그래프를 이용하여 분석하는 방법을 설정하여 보았다. 고체상추출은 고분자성물질이 충진된 Oasis HLB cartridge를 이용하여 최적의 조건을 확립하였으며 이때의 평균회수율은 87.0% 이었다. 형광검출기를 이용한 경우가 질량분석기를 이용한 경우보다 검출한계가 낮았으나 선택성의 측면에서 질량분석기가 우수하였다.