• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.64-68
• /
• 2014

This paper introduces the use of a crown-shaped (CR) lens to effectively diffuse the light from a light-emitting diode (LED) without any loss in the light intensity, in contrast to polymer-bulb-type diffusers. The diffusion lens was designed based on the Snell's law, which describes the physical path of a ray passing through the boundary between different media. CR lenses were fabricated by polydimethylsiloxane (PDMS) casting and UV-embossing processes, which used a pre-designed metal mold and UV-curable resin, respectively. Through experiments and optical evaluations, it was verified that the newly proposed CR lens not only decreased the vertical light strength and glare effect from an LED light source but also improved the diffusion characteristics while maintaining the quality of the LED's light intensity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.756-759
• /
• 2003

In this study, an ultrasonic transducer is fabricated with a 1-3 type composite resonator. Pulse-echo responses of an ultrasonic transducer are investigated in underwater with the designated water-levels. LED output signals of a level limit switch with changing a water level are obtained by using the currently developed self-made 1-3 type composite transducer and electric measuring unit. LED is turned on at above the up-limit level with increasing a water level, and LED is turned on at less than the down-limit level with decreasing a water level.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.104-105
• /
• 2000

1963년 Pope 등에 의해 anthracene 단결정에서 전기 발광(Electroluminescence, EL)이 처음 발견되었지만 실용성의 문제로 크게 각광을 받지는 못했다. 그후로 진공 증착 방법이 고안되고, 1987년 Tang 등에 의해 8-hydroxyquinoline aluminium(Alq$_3$)이라는 색소를 승화시켜 발광층으로 하는 박막 형태의 소자가 개발되면서 유기물로 만들어진 발광다이오드(LED)에 대한 연구가 활발해 졌다. 또한, 1990년 영국의 케임브리지 대학에서 공액고분자인 poly(p-phenylenevinylene)(PPV)를 이용해서 만든 LED가 개발된 이후, 고분자 LED에 대한 연구가 활발히 진행되어오고 있다. $^{(1)}$ (중략)

• 대한화학회지
• /
• 제31권6호
• /
• pp.590-600
• /
• 1987

bis(p-chlorocarbonylphenyl)diphenylsilane (BCCDPS)과 pyromellitic dianhydride(PMDA) 및 몇가지의 디아민으로부터 실리콘을 함유하고 있는 폴리아미드-이미드를 합성하였다. 열중량분석기를 이용하여 합성한 중합체의 열적성질을 조사하였으며 Friedman 방법으로 중합체 열분해 반응의 활성화에너지를 구하였다. 중합체 분자내의 bis(p-carbonylphenyl)diphenylsilane units(BCDPS) 단위의 함량이 증가할수록 열안정성과 열분해 반응의 활성화에너지값은 감소하였으나 용매에 대한 용해성은 증가하였다.

• KSBB Journal
• /
• 제13권5호
• /
• pp.626-630
• /
• 1998

Ammonium limitation did not promote ply(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) production of Azotobacter vinelandii UWD. In acid phase, ammonium limitation during utilization of propionic acid and butyric acid led to 35% decrease in product yield. In glucose phase, both biomass yield and polymer yield decreased about 22% under ammonium limitation. However, in nitrogen-fixing culture glucose was consumed 25% faster and the final PHBV wt% decreased slightly. Under nitrogen limitation a portion of the carbon sources was used fro nitrogen fixation rather than biomass and polymer formation, resulting in a decrease in biomass yield and polymer yield.

• 센서학회지
• /
• 제15권3호
• /
• pp.205-210
• /
• 2006

Hydrophobic polymer [ex. Poly(vinylidenfluoride)] layer was coated on polyaniline (PANi) sensor to reduce the contamination humidity. The differences in sensitivity to methanol gas detection in various humidity condition between pure-PANi sensor and sensor coated with poly(vinylidenfluoride) polymer (PVDF) (coated-PANi sensor) were investigated. Considering the relation between the density of pore, which was coated on the layer of the PANi sensor, and sensitivity was investigated. To fabricate the porous PVDF layer on PANi sensor, poly(vinylalcohol) (PVA), which is water-soluble polymer, was used. Coated-PANi sensor was less affected by humidity compared with pure-PANi sensor. And higher density of pore on PVDF layer led to higher sensitivity.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.910-916
• /
• 2009

Present work was focused on the influence of methylcellulose (MC) on steady rheology of wheat gliadin solution and the properties of glycerol plasticized gliadin films. The presence of MC below 0.99 wt% improved viscosity and flow activation energy of the 10 wt% gliadin solution significantly. In the casting films containing 0.2 g glycerol/g dry protein, the MC component aggregated in the gliadin matrix. The blend films containing less than 7.7 wt% MC exhibited higher Young's modulus (E) and tensile strength (${\sigma}_b$) and lower elongation at break (${\epsilon}_b$) in comparison with the pure gliadin film, which was related to the intermolecular interaction between MC and gliadins, the brittle fracture of the aggregated MC component, and the increase in glass transition temperature ($T_g$) of the gliadin phase. Increasing MC content led to a slight increase in water vapor permeability (WVP) without significant influence on the moisture absorption (MA).

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.25-26
• /
• 2006

Azobenzene functionalized polymers have been extensively investigated due to the potential applications in the areas of optical switching, optical elements, optical information storage, and nonlinear optics. These applications are mainly achievable due to photoinduced properties of azobenzene groups with photoisomerization and photoinduced anisotropy. We report applications to the optoelectronic devices using inscribed one-(1D) and two-dimensional (2D) SRGs on azo polymer films. The inscribed holographic SRGs patterns were useful to control or enhance optoelectronic properties such as transparent electrode patterning, hybrid solar cell and ultraviolet GaN-based LED.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.935-942
• /
• 2009

Silk is a textile material, as well as one of the oldest biomaterials. However, the recent progress of biomedical science and technology has led to the replacement of silk by various biomaterials based on synthetic polymers. Despite the wide variety of biomaterials available, these materials suffer certain limitations that prevent them from meeting the various demands of the medical field. Therefore, silk continues to attract considerable interest as a promising biomaterial. This paper explains the fundamentals of silk protein, and reviews the many applications of silk biomedical polymers.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.127-131
• /
• 2017

This paper presents a generalized formulation for optimizing the design of concrete beam reinforced with glass fiber reinforced polymer bar. The optimization method is formulated to find the design variables leading to the minimum weight of concrete beam with constraints imposed based on ACI code provisions. A simple genetic algorithm is utilized to solve the optimization task. The weights of concrete and glass fiber reinforced polymer bar are included in the formulation of the objective function. The ultimate limit states and the serviceability limit states are included in formulation of constraints. The results of illustrated example demonstrate the efficiency of the proposed method to reduce the weight of beam as well as to satisfy the above requirement. The application of the optimization based on the most economical design concept have led to significant savings in the amount of the component materials to be used in comparison to classical design solutions.