DOI QR코드

DOI QR Code

Sensing characteristics of polyaniline sensor coated with porous PVDF layers to methanol gas under various humidity conditions

다공성 PVDF막이 코팅된 Polyaniline 센서의 다양한 습도분위기의 메탄올 가스에 대한 감응특성

  • Lim, Cheol-Beom (Department of Material Science Metallurgy, Kyungpook National University) ;
  • Sohn, Sung-Ok (Department of Material Science Metallurgy, Kyungpook National University) ;
  • Huh, Jeung-Soo (Department of Material Science Metallurgy, Kyungpook National University)
  • Published : 2006.05.31

Abstract

Hydrophobic polymer [ex. Poly(vinylidenfluoride)] layer was coated on polyaniline (PANi) sensor to reduce the contamination humidity. The differences in sensitivity to methanol gas detection in various humidity condition between pure-PANi sensor and sensor coated with poly(vinylidenfluoride) polymer (PVDF) (coated-PANi sensor) were investigated. Considering the relation between the density of pore, which was coated on the layer of the PANi sensor, and sensitivity was investigated. To fabricate the porous PVDF layer on PANi sensor, poly(vinylalcohol) (PVA), which is water-soluble polymer, was used. Coated-PANi sensor was less affected by humidity compared with pure-PANi sensor. And higher density of pore on PVDF layer led to higher sensitivity.

Keywords

References

  1. N. E. Agbor, M. C. Petty, and A. P. Monkman, 'Polyaniline thin films for gas sensing', Sensors and Actuators B, vol. 28, pp. 173-179, 1995 https://doi.org/10.1016/0925-4005(95)01725-9
  2. A. L. Kukla, Y. M. Shirshov, and S. A. Peletsky, 'Ammonia sensors based on sensitivity polyaniline films', Sensors and Actuators B, vol. 37, pp. 135140, 1996
  3. B. P. J. deLacy Costello, P. Evans, and N. M. Ratcliffe, 'Preparation of polypyrrole composites and the effect of volatile amines on their electrical properties', Analyst, vol. 121, pp. 793-797, 1996 https://doi.org/10.1039/an9962100793
  4. C. K. Tan and D. J. Blackwood, 'Interaction between polyaniline and methanol vapour', Sensors and Actuators B, vol. 71, pp. 184-191, 2000 https://doi.org/10.1016/S0925-4005(00)00615-8
  5. J. Y. Kim, D. W. Shon, Y. Y. Sung, and E. R. Kim, 'Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor- phase polymerization', Synthetic Metals, vol. 132, pp. 309-3 13, 2003
  6. J. H. Baek, H. R. Hwang, J. K. Noh, J. S. Huh, D. D. Lee, J. O. Lim, and H. K. Byun, 'T he fabrication and sensing characteristics of conducting ploymer sensors for measurement of VOC gas', Journal of the Korean Sensors Society, vol. 10, no. 2, 06, pp 125-13 2, 2001
  7. M. E. H. Amrani, P. A. Payne, and K. C. Persaud, 'M ulti-frequency measurements of organic conducting polymer for sensing of gases and vapour' , Sensors and Actuators B, vol. 33, pp. 137-141 , 1996 https://doi.org/10.1016/0925-4005(96)01842-4
  8. S. P. Jain, S. J. Chakane, A. B. Samui, V. N. Krishnamurthy, and S. V. Bhoraskar, 'Humidity sensing with weak acid-doped polyaniline and its composites', Sensors and Actuators B, vol. 96, pp. 124-129, 2003
  9. R. Nohri a, R. K. Khill an, Y. Su, R. H. Dikshit , Y. R. Lvov, and K. Varahramyan, 'Humidity sensor based on ultrathin polyaniline film deposited using layer-by-Iayer nano-assembly', Sensors and Actuators B, vol. 114, pp. 2 18-222, 2005
  10. G Boiteux, A. Ho-Hoang, F. Fache, M. Lemaire, I. Glowaski, and J. Ulanski, 'Conductive compos ites based on $PVDF-C_2F_3H$ and subtituted or pure polytpyrroles)' , Synthetic Metals, vol. 69, pp. 487 489, 1995 https://doi.org/10.1016/0379-6779(94)02538-A
  11. L. H. C. Mattoso and L. F.Malmonge, 'Morphology varia tion as a function of composi tion for blends of PVDF and a polyan iline derivat ive' , Polymer, vol. 40, pp. 513-518, 1999 https://doi.org/10.1016/S0032-3861(98)00280-8
  12. L. F. Malmonge and L. H. C. Mattoso, 'Thermal analysis of conductive blends of PVDF and poly( 0methoxyaniline)', Polymer, vol. 41, pp. 8387-8391, 2000 https://doi.org/10.1016/S0032-3861(00)00182-8
  13. 황하룡, '전도성 고분자 센서의 휘발성 유기화합물 감응특성', 경북대학교 대학원, 2002