• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.65-77
• /
• 1999

A portland cement was reinforced by incorporating carbon fiber(CF), silica powder, and impregnating the pores with styrene monomers which were polymerized in situ. The effects of type, length, and volume loading of CF, mixing conditions, curing time and, curing conditions on mechanical behavior as well as freeze-thaw resistance and longer term stability of the carbon-fiber reinforced cement composites (CFRC) were investigated. The composite Paste exhibited a decrease in flow values linearly as the CF volume loadings increased. Tensile, compressive, and flexural strengths all generally increased as the CF loadings in the composite increased. Compressive strength decreased at CF loadings above approx. 3% in CFRC having no impregnated polymers due to the increase in porosity caused by the fibers. However, the polymer impregnation of CFRC improved all the strength values as compared with CFRC having no Polymer impregnation. Tensile stress-strain curves showed that polymer impregnation decreased the fracture energy of CFRC. Polymer impregnation clearly showed improvements in freeze-thaw resistance and drying shrinkage when compared with CFRC having no impregnated polymers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.67-73
• /
• 1992

Polymer-Impregnated Concrete(PIC) is a new polymer-concrete composite material which consist of basic cement concrete and polymer. The mechanical properties and behavior of PIC depend on the type of polymers and the impregnation techniques. In general, the polymer impregnation can improve the strength, durability and ductility of normal concrete. The objective of this study is to develop the analytical procedure for analyzing the structural responces of polymer-impregnated concrete beams with different polymer loading by using finite element method on the basis of experimental results.

• 폴리머
• /
• 제29권6호
• /
• pp.565-570
• /
• 2005

용융 점도 조절에 의한 나일론6(N6)의 melt impregnation공정에서의 용융가공 특성에 대하여 고찰하여 보았다. N6의 용융 점도를 조절하기 위하여 calcium stearate(CaST)를 윤활제로 사용한 결과, 1 wt$\%$의 윤활제의 첨가에 의하여 용융 점도가 감소함을 알 수 있었다. 아울러 폴리카프로락톤(PCL)을 N6에 반응 용융 블렌딩하여 N6의 용융 점도를 낮출 수 있었으며 phenyl phosphite(PP)와 diphenyl phosphite(DPP)를 첨가하여 블렌딩 시 상호에스테르 교환반응을 증가시켜 추가적인 용융 점도 감소를 확인하였다. 이러한 방법들은 N6의 고온 가공의 문제점으로 지적되는 열안정성 저하를 최소화하면서 melt impregnation 공정에서 필수적인 저점도 가공을 가능하게 할 수 있을 것으로 사료된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.85.2-85.2
• /
• 2010

There is widespread effort to develop polymer membranes in place of Nafion for high temperature polymer electrolyte membrane fuel cell(PEMFC). In our study, SiO2 membranes are arranged by electrospinning method. For impregnation solution, the modified sulfonated poly(ether ether ketone)(SPEEK) polymer is prepared from sulfonation, sulfochlorination, partial reduction and lithiation reaction. The modified polymer is cross-linked with 1,4-diiodobetane in NMP solvent and then blended with Heteropoly acid(HPA). The characterization of membranes is confimed by FT-IR, Thermogravimetry(TGA), water uptake test and single cell performance test for PEMFC, etc. The composite membrane shows satisfactory thermal and mechanical properties. Beside, The membrane exhibits good ion exchange capacity and high proton conductivity. As a result, The composite membrane is promising as an alternative membrane in high temperature PEMFC.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.81-82
• /
• 2020

In this study, after applying a silicate-based impregnation and polymer-based coating to fire damaged high strength concrete, carbonation resistance was evaluated to compare and evaluate the carbonation depth according to the type of surface repair materials. As a result of the experiment, it was confirmed that the carbonation resistance was increased in the case of the concrete with the surface repair materials compared to the control specimen without the surface repair materials. In particular, in the case of the polymer-based coating agent, it was confirmed that the carbonation hardly progressed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.156-161
• /
• 1993

This paper is to develop steel fiber reinforced polymer-impregnated concrete(SFPIC) by impregnation polymer impregnate into hardened steel fiber reinforced concrete(SFRC). Steel fiber induces ductile behavior and polymer impregnant increase compressive strength. Steel fiber reinforced polymer-impregnated concrete specimens are prepared with fiber contents of 0.0, 1.5, 2.0, 2.5% and tested to obtain uni-axial and bi-axial compression strengths, tensile strength and flexural strength. The strength and mechanical properties of normal concrete, SFRC, SFPIC are compared.

• Journal of the Korean Wood Science and Technology
• /
• 제2권3호
• /
• pp.3-16
• /
• 1974

One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

• 폴리머
• /
• 제26권1호
• /
• pp.105-112
• /
• 2002

연구는 electro-active polymer(EAP)의 특성을 가지는 ion-exchange polymer metal composite(IPMC)을 이용하여 지능형 대장내시경 개발에 목적을 두고 있다. IPMC는 낮은 구동전압과 빠른 반응속도로 인하여 매우 매력적인 물질이다. 본 연구에서는 IPMC구동기의 전극을 무전의 도금 방법을 이용하여 용액함침-환원방법(impregnation-reduction method)으로 제조하였으며 코팅된 백금전극의 횟수에 따라 변위와 변화를 측정하였다. 구동특성을 알아보기 위하여 길이, 주파수에 대한 변위, 힘을 측정하였으며, 주파수 대역은 저주파 대역과 공명주파수 대역을 사용하는 것이 적합하다는 결론을 얻었다. 또한 다양한 구동적 특성과 수분의 함량에 따른 영향에 대해 고전적 적층 이론 (classical laminate theory, CLT)을 이용하여 이방성 IPMC의 응력분포와 수분이동에 따른 모멘트, 변형률, 곡률(cuvature)을 모델링 하였다.

• 폴리머
• /
• 제30권3호
• /
• pp.210-216
• /
• 2006

담배 주류연 중 카보닐 화합물의 선택적 감소를 위한 필터 물질을 제조하기 위하여 하이드라존 반응에 있어서 촉진제로 사용되는 과염소산과 인산을 2,4-dinitrophenylhydrazine (2,4-DNPH)와 dansylhydrazine (DAH)과 함께 각각의 흡착제에 첨착시켰다. 제조된 첨착 흡착제의 구조는 FTIR/ATR을 이용하여 확인하였으며 SEM을 이용하여 표면을 관찰하였다. 또한 첨착 시간과 촉진제 그리고 첨착 시약에 따른 첨착량과 담배 주류연 중 카보닐 화합물의 흡착특성을 조사하였다. 첨착량은 첨착 시간에 따라 증가되었으며 2.4-DNPH를 첨착한 흡착제의 경우 다른 흡착제에 비해 카보닐 화합물의 제거 효율이 우수하였다. 또한 폴리아크릴계 흡착제에 2,4-DNPH를 첨착시킬 경우 다른 기재의 흡착제에 비해 우수한 제거 효율을 나타내었는데 이러한 결과들로부터 궐련필터로의 적용 가능성을 확인할 수 있었다.