• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.1-10
• /
• 2014

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted phophomolybdic acid(Cs-MoPA) with cross-linking agent contents of 0.01mL. In conclusion, CL-SPEEK/$Cs_{(2.5)}$-MoPA/ceria(1%) membrane showed the optimum results such as 0.1095S/cm of proton conductivity at $80^{\circ}C$, 2.906meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 49.73MPa of tensile strength which were better than Nafion 117 membrane.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.67-74
• /
• 2002

New immunoprotecting membranes were prepared by spin coating the amphiphilic random multiblock copolymers of poly(ethylene glycol) (PEG) and poly(tetramethylene ether glycol) (PTMEG) or poly(dimethyl siloxane) (PDMS) on porous Durapore(R) membrane. The copolymer coating was intended to make a biocompatible, immunoprotecting diffusional barrier and the supporting porous substrate was for mechanical stability and processability. By filling Durapore(R) membrane pores with water, the penetration of coating solution into the pores was minimized during the spin coating process. A single coating process produced a completely covered thin surface layer (~1 ${\mu}{\textrm}{m}$ in thickness) on the porous substrate membrane. The permselectivity of the coated layer was influenced by PEG block length, polymer composition, and thickness of the coating layer. A composite membrane with the coating layer prepared with PEG 2 K/PTMEG 2 K block copolymer showed that its molecular weight cut-of fat any 40 based on dextran was close to the molecular size of IgG (Mw = 150 kDa). However, IgG permeation was detected from protein permeation test, while glucose oxidase (Mw = 186 kDa) was not permeable through the coated membrane.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.524-531
• /
• 2015

To improve the electrochemical and mechanical characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK). The SPEEK organic-inorganic blended composite membranes were prepared by sol-gel casting method. It was loaded with the highly dispersed ceria and cesium-substituted molybdosilicic acid (Cs-MoSiA) and 1,4-diiodobutane which was cross-linking agent contents of $10{\mu}L$. Cs-MoSiA was added to increase proton conductivity. Ceria ($CeO_2$) was used as a free radical scavenger which degrade the membrane in polymer electrolyte membrane water elctrolysis (PEMWE). In conclusion, CL-SPEEK/Cs-MoSiA/Ceria 1% composite membrane showed high proton conductivity 0.2104 S/cm at $25^{\circ}C$ which was better than Nafion 117 membrane.

• 멤브레인
• /
• 제18권2호
• /
• pp.116-123
• /
• 2008

폴리스티렌-블록-폴리히드록에틸 메타크릴레이트(PS-b-PHEMA), 술포석시닉산(SA), 인텅스텐산(PWA)으로 구성된 수소 이온 전도성 나노복합 고분자 전해질막을 제조하였다. 폴리히드록에틸 메타크릴레이트(PHEMA) 블록의 히드록실그룹(-OH)와 술포석시닉산(SA)의 -COOH 그룹과의 에스테르 반응에 의하여 전해질막을 가교시켰다. 폴리헤테로산(PWA)을 도입했을 때, $SO_3^-$ 그룹의 신축 밴드가 $1187cm^{-1}$에서 $1158cm^{-1}$로 낮아졌으며, 이는 PWA 입자가 전해질막의 술폰산 그룹과 상호작용함을 나타낸다. PWA 함량이 30wt%가 되었을 때, 상온 전도도는 0.045에서 0.062S/cm로 증가되었으며, 이는 PWA 입자의 고유 전도도 특성과 전해질막의 술폰산기의 산도가 증가했기 때문이다. 또한 30wt%를 함유한 복합 전해질막은 $100^{\circ}C$에서는 최대 0.126 S/cm의 수소 이온 전도도를 나타내었다 PWA가 첨가됨에 따라 복합 전해질막의 열적특성 또한 증가하였다.

• Elastomers and Composites
• /
• 제30권3호
• /
• pp.185-194
• /
• 1995

Membrane process has been employed to separate a specific substance from gas or liquid mixture, and treat wastewater. This is due to the fact that the substance of mixture can be permeated and separated selectively by membrane. Since Initial equipment and operation costs are not expensive, membrane process has been adopted in various fields such as petroleum Industry, chemistry, polymer, electronics, foods, biochemical industry and wastewater treatment. In this study, $CaCO_3$ particles impregnated in silicone rubber network were extracted by using supercritical carbon dioxide and pore distribution of silicone $rubber-CaCO_3$ was investigated with varying amount of extract. Silicone rubber has excellent mechanical properties such as heat-resistance, cold-resistance etc. and $CaCO_3$ has microporous structure. It is possible to make silicone $rubber-CaCO_3$ composite sheets via work-intensive kneading processes. In so doing $CaCO_3$ particles become distributed and impregnated in silicone rubber network. Supercritical carbon dioxide diffuse through composite sample, then sample is swollen. $CaCO_3$ in silicone rubber network Is dissolved in supercritical carbon dioxide, and its sites become pores. Pore distribution, pore shape and surface area are observed by SEM(scanning electron microscope) micrograph and BET surface area analyzer examination respectively. Pore characteristics of membrane suggest the possibilities that the membrane can be used for process of mixture separation and wastewater treatment.

• 열처리공학회지
• /
• 제27권4호
• /
• pp.169-174
• /
• 2014

The effect of varying amounts of graphite and $TiB_2$ on the electrical conductivity of composite bipolar plates was systematically studied. In this study, Titanium diboride ($TiB_2$) which has a high electrical conductivity, was selected as a filler and a additive material instead of conventional graphite. For proper distribution of the filler and matrix materials, ball milling using alumina balls was conducted for 1h, and then the hot press method was applied for the preparation of composite samples. The results showed a rapid increase in the electrical conductivity of composite bipolar plates at the critical filler content. However, $TiB_2$ and graphite composite bipolar plates showed similar increases in the electrical conductivity even though $TiB_2$ has a higher electrical conductivity than graphite. In addition, it was also found that a small addition of $TiB_2$ to graphite filler could be very effective for increasing the electrical conductivity and flexural strength of the composite bipolar plate.

• 멤브레인
• /
• 제30권5호
• /
• pp.326-332
• /
• 2020

본 연구에서는, 혐기성 처리수에 용해된 바이오가스의 회수를 위해 불화 실리카/고분자 중공사 복합막을 제조하고 막접촉기에서의 성능을 평가하였다. 복합막은 상용 폴리에테르이미드인(PEI) Ultem^®을 이용하여 만든 중공사막 표면에 불화 실리카를 강력한 공유 결합을 통해 코팅하는 방법으로 제조되었다. 막접촉기는 바이오가스로 포화된 수용액을 중공사의 외부에 공급하고, 중공사 내부로 기체를 투과시키는 방법으로 운전하였다. 높은 공극률을 가진 중공사막(PEI-fSiO₂-A)은 액상 속도가 0.03 m/s일 때 메탄 회수 유량이 8.25 × 10^-5 ㎤ (STP)/㎠·s에 달했고 불화 실리카에 의해 표면 소수성이 매우 높아져 물과의 접촉각이 75.6°에서 120~122°로 향상되었다. 본 연구에서 제조된 복합막은 바이오가스의 투과 속도와 소수성 모두에서 탈기용으로 제조된 상용 폴리프로필렌 막보다 우수한 성능을 나타냈다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.437-447
• /
• 2012

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstophosphoric acid (Cs-TPA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TPA/ceria (1%) membrane showed the optimum results such as 0.130 S/cm of proton conductivity at $80^{\circ}C$, 2.324 meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 65.03 MPa of tensile strength which were better than Nafion 117 membrane.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.44-54
• /
• 2004

Organic-inorganic composite membranes based on sulfonated poly(phthalazinone ether sulfone) (sPPES)/silica hybrid were prepared using the sol-gel process under acidic conditions. The sulfonation of PPES with concentrated sulfuric acid as sulfonation agent was carried out to prepare proton exchange membrane material. The behaviors of the proton conductivity and methanol permeability are depended on the sulfonation time (5-100 hr). The hybrid membranes composed of highly sulfonated PPES (IEC value: 1.42 meq./g) and silica were fabricated from different silica content (5-20 wt%) in order to achieve desirable proton conductivity and methanol permeability demanded for fuel cell applications. The silica particles within membranes were used for the purpose of blocking excessive methanol cross-over and for forming the path way to transport of the proton due to absorbing water molecules with ≡SiOH on silica. The presence of silica particles in the organic polymer matrix results in hybrid membranes with reduced methanol permeability and improved proton conductivity.

• 멤브레인
• /
• 제33권6호
• /
• pp.325-343
• /
• 2023

직접 메탄올 연료전지(direct methanol fuel cell, DMFC)는 연료의 개질 없이 메탄올 연료를 공급하여 수소이온과 전자 생성을 통해 전류를 생산하는 에너지 변환 장치이다. 현재 DMFC에 적용되고 있는 고분자 전해질 막(polymer electrolyte membrane, PEM)은 높은 수소이온 전도도와 물리화학적 안정성을 갖는 과불소화계 이오노머를 활용한 PEM이지만, 높은 메탄올 투과율과 분해 시 발생되는 환경 오염 물질 등의 문제로 인해 신규 소재 개발이 요구되고 있다. 최근 들어, 과불소화계 이오노머에 비해 낮은 연료 투과율 및 우수한 물리화학적 안정성을 갖는 탄화수소계 고분자 기반 PEM을 DMFC에 적용하는 연구들이 보고되고 있다. 본 총설에서는 탄화수소계 고분자 기반 PEM 중 1) 친수성/소수성 영역의 뚜렷한 나노 상분리 구조를 나타내는 가지형 공중합체를 합성하여 수소이온 전도성과 메탄올의 선택도를 향상시킨 연구, 2) 제막 단계에서 가교 구조를 도입하여 메탄올 투과율을 감소시키고 치수 안정성을 향상시킨 연구, 3) 유/무기계 첨가제 및 다공성 지지체를 도입하여 성능을 개선한 복합 막 개발 연구에 대해 소개하고자 한다.