• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.398-398
• /
• 2007

The Liquid Crystal (LC) alignment uniformity is very important in LC devices. The alignment mechanism of LC molecules on a rubbed polyimide (PI) surface is very important for both LC fundamental research and application. So, Generally a rubbing method to align LC has been widely used to mass-produce LCD panels. But because rubbing method is contact method between rubbing fabric and indium-tin-oxide glass or flexible substrate, rubbing method has some defects, such as the electrode charges and the creation of contaminating particles. Thus we strongly recommend a non-contact alignment technique for getting rid of some defects of rubbing method. Most recently, the LC aligning capabilities achieved by ion-beam exposure on the organic and nonorganic thin film surface have been reported successfully. In this research, we studied the tilt angle generation and electro-optical performances for a NLC on homeotropic polyimide surfaces with ion-beam exposure. The LC aligning capabilities of a nematic liquid crystal (NLC) on a homeotropic PI surface using a new ion-beam method were studied. On the homeotropic PI surface, the tilt angle of the NLC by exposure ion-beam had a tendency to decrease as increased ion-beam energy density. And, on the homeotropic PI surface, the alignment character of the NLC with respect to ion-beam energy was good. And we achieved satisfactory result for EO character.

• Tribology and Lubricants
• /
• 제37권4호
• /
• pp.125-128
• /
• 2021

A means of enhancing the performance of triboelectric nanogenerators (TENGs) is increasing the differences in work functions between contacting materials. Hexagonal boron nitride (h-BN) exhibits excellent mechanical properties and high chemical stability as well as a high work function. As a result, engineers in the field of energy harvesting have envisioned using h-BN in the electrification layer in TENGs. For the industrial application of h-BN in TENGs, large-scale production is necessary, and h-BN is generally exfoliated and dispersed in various solvents. In this study, we evaluate the performance of a TENG with h-BN nanoflakes in the polyimide (PI) layer. To synthesize a PI composite containing h-BN nanoflakes, h-BN powders are exfoliated and dispersed in poly(amic acid) (PAA), which is the precursor of PI. Then, h-BN dispersion is spin-coated onto the PI film and cured for 2 h under 300℃. This composite material can then be used for the electrification layer in TENGs. Below the electrification layer, an aluminum foil is placed and used as an electrode. When the contact and separation processes with polyethylene terephthalate are repeated, the fabricated TENG shows a maximum power density of 190.8 W/m². This study shows that h-BN is a promising material for enhancing the performance of the electrification layer in TENGs.

• 센서학회지
• /
• 제28권6호
• /
• pp.390-394
• /
• 2019

This paper presents an inkjet-printed plastic force sensor using PEDOT:PSS. Using a piezoelectric-type inkjet printer, the force sensor was manufactured by printing PEDOT:PSS ink onto a polyimide (PI) substrate film. Applying a vertical force of 0 to 100 N to the force sensor on the PI substrate with a thickness of 64 mm, the resistance of the force sensor increased in proportion to the input force by the length deformation of the PI substrates and the sensor pattern. As a result, the fabricated sensor has a characteristic of 0.001% /N with a linearity of 99.38%. In addition, as the thickness of the PI substrate film increased, the sensitivity of the sensor increased linearly. The fabricated force sensor is expected to be applied to industrial sites and healthcare fields.

• 폴리머
• /
• 제34권6호
• /
• pp.495-500
• /
• 2010

4,4'-(Hexafluoroisopropylidene)diphthalic anhydride(6FDA)와 bis[4-(3-amino phenoxy)phenyl] sulfone(BAPS)의 조성에 cis-4-cyclohexene-1,2-dicarboxylic anhydride(CDBA)를 다양한 몰%로 사용하여 사슬 말단에 가교 반응이 된 폴리이미드(PI)를 얻었다. Grubbs 촉매 0.1 wt%를 사용하여 가교된 폴리아믹산(poly(amic acid), PAA)을 합성한 후에 PAA를 다양한 온도에서 열처리를 통해 가교된 PI 필름을 합성하였다. 제조된 필름의 열적-기계적 성질은 퓨리에 변환 적외선 분광기(FTIR), 시차주사 열량계(DSC), 열중량 분석기(TGA), 열기계 분석기(TMA), 만능인장 시험기(UTM) 등을 사용하여 측정하였고, 색차계(spectrophotometer)와 자외선-가시광선 흡광도기(UV-Vis. spectrometer)를 이용하여 광학적 특성을 확인하였다. CDBA의 몰%가 증가함에 따라 열적 기계적 성질은 증가하였지만 광학적 투명도는 이와는 반대로 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.549-552
• /
• 1999

We have developed an novel vertical-alignment (VA) - $\pi$ cell mode that provides a wide viewing angle and fast response times for negative dielectric anisotropy nematic liquid crystal (NLC) on a homeotropic polyimide (PI) surfaces. We had the good voltage-transmittance curves and low driving voltages were achieved with the novel VA - $\pi$ cell mode without negative compensation film. Iso-viewing angle characteristics using the novel VA - $\pi$ cell mode without negative compensation film of NLC was also successfully observed. As well a fast response time of 31.7ms for the novel VA - $\pi$ cell mode was measured. Consequently, It is seen that by using the novel VA - $\pi$ cell mode the iso-viewing angle, fast response time, and low driving voltage characteristics can be achieved.

• 한국재료학회지
• /
• 제10권6호
• /
• pp.450-455
• /
• 2000

실리콘 소자가 더욱 미세화되면서, 발생되는 power consumption, crosstalk와 interconnection delay 등을 감소시키기 위해 $SiO_2$ 대신에 저유전 상수막의 적용이 고려되어진다. 본 논문에서는, 저유전 상수 층간 절연막 재료로 유망한 폴리이미드의 식각 특성에 $O_2/SF_6$ 가스가 미치는 영향을 연구하였다. 폴리이미드의 식각률을 SF(sub)6 가스의 첨가에 따라 산소와 hydrocarbon 폴리머 간의 반응을 억제하는 비휘발성 물질은 fluorine 화합물의 형성에 의해 감소되었다. 반면에, 기판 전극의 전압 증가는 물리적인 충격을 통해 식각 공정을 증가시켰다. 또한 작은 량의 SF(sub)6 가스 첨가는 식각 topography에 바람직하였다. 폴리이미드 식각을 위한 $SiO_2$ hard mask 사용은 산소 플라즈마 식각 하에서 효과적이었다(선택비-30). 반면에 $O_2SF_6$ 가스 조성은 식각 선택비를 4로 저하시키게 되었다. 이러한 결과를 기초로, $1-2\mu\textrm{m}$ 선폭을 가진 PI 2610의 식각을 원활히 수행할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.105-106
• /
• 2006

현재 투명 전도성 산화물로 널리 사용되고 있는 ITO등의 물질들이 갖는 문제점을 해결하기 위하여 ZnO 에 Ga이나 Al등의 불순물을 첨가하여 투명 전도성 재료로써 이에 대한 연구가 진행중에 있다. 본 연구에서는 RF 마그네트론 스퍼터법으로 Al이 첨가된 ZnO:Al Ceramic 타겟으로 Coring 1737 유리기판과 파손의 우려가 적고 유연성을 갖는 $25{\mu}m$ 두께의 polyimide(PI) 기판위에 박막을 증착하여 특성을 비교 조사하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.168-172
• /
• 2018

This study first investigates the effect of the choice of cation on three different ionic-liquid-based gel polymer electrolytes (ILPEs) with polyimide membranes. The preparation of three ILPEs based on electrospun membranes of PI and incorporating a room-temperature ionic liquid, 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide complexed with lithium bis(trifluoromethylsulfonyl)imide, is described. ILPE-EMImTFSI has an ionic conductivity as high as $5.3{\times}10^{-3}S\;cm^{-1}$ at $30^{\circ}C$. Furthermore, it shows higher thermal stability and electrochemical oxidation stability compared to the other two ILPEs because of its stronger bonds. These results indicate that polyimide-based ILPE-EMImTFSI is a good candidate for use in high-safety rechargeable lithium metal batteries.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.513-514
• /
• 2008

The potential of non-rubbing technology for applying to display devices was demonstrated by irradiating a high density argon ion beam (IB) on a polyimide (PI) as a liquid crystal alignment layer. The superior electro-optical characteristics were obtained, compared to rubbed PI, Although the low pretilt angle was created on the IB irradiated PI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.