• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.835-845
• /
• 1994

In this paper, the effects of the adhesive thickness and adherend roughness on the static and fatigue strengths of the adhesively bonded circular single lap joints has been investigated by an experimental method. The stacking sequence effect of the composite adherend on the static and fatigue strength and the fracture patterns of the adhesive failure were also observed. Since the circular single lap joint fails catastrophically beyond the static strength of fatigue limit, the tubular polygonal adhesively bonded joints such as triangular, tetragonal, pentagonal, hexagonal as well as elliptical joints were manufactured in order to give partial mechanical characteristics to the adhesively bonded tubular joints. These joints were tested both in static and fatigue modes. From the experimental investigations, it was found that the fatigue strength of the circular adhesively bonded joints was much dependent on the arithmetical average surface roughness of the adherends and the polygonal adhesively bonded joints had better fatigue strength characteristics than the circular adhesively bonded joints.

• 한국가축번식학회지
• /
• 제17권3호
• /
• pp.221-232
• /
• 1993

Morphological changes in the uterine and vaginal epithelial cells of the Korean native goats were studied in fifteen primiparous goats slaughtered on the day of parturition and on days 1, 3, 10 and 21 postpartum. 15 uterus and vagina from goats were examined by scanning and transmission electron microscopy. The results obtained in this study were summarized as follows : 1. Transmission electron microscopically, long microvilli which sometimes ramified were found until 10 days postpartum, while short microvilli were found at 21 days. The high electron dense irregular-shaped mitochondria were found in the cytoplasm and the crystalline structure of the mitochondrial matrix was also found from 1 day to 10 days postpartum. Well-developed rough-endoplasmic reticulum (rER) with dilated cisternae which contained the proteins materials was observed at 21 days postpartum. These materials were fused each other and then large granules were found in the free surface of the cytoplasm. A few lipid droplets were generally appeared in the cytoplasm, while numerous droplets were found at 21 days postpartum. A moderate number of ribosomes, a few multivesicular bodies, vesicles, lysosomes and macrophages were found. The globule leucocytes were observed from 0 to 3 days postpartum by transmission electron microscopy. The short microvilli, high electron dense cytoplasm and severe indentation of the nuclear enbelope were found in the vaginal epithelium. Numerouos small vesicles and a few vacuoles were observed in the apical cytoplasmic portion of the epithelium. A few mitochondria were high electron dense and irregular in shape. A moderate amounts of microfilaments, loose intercellular space and dilated rER were also found at 21 days postpartum. 2. Scanning electron microscopically, the folds of the uterine mucosa were generally deep. The long microvilli of the epithelium were found until 3 days postpartum, while short microvili were found at 10 and 21 days postpartum. The distinct intercellular boundary was seen. The apporcine secretory profile of the epithelium observed at between 3 and 10 days postpartum and the cells were somewhat protruded into the lumen. The short microvilli were found on the surface of the protruded cells, while polygonal microridge profile of the epithelium and some dome-shaped epithelium were also observed at 21 days postpartum. The folds of the vaginal mucosa were deep and epithelium was polygonal in shape. The microvilli of the epithelium were long until 3 days postpartum, while they were short at 10 and 21 days. The polygonal epithelium was invaginated into the center of the cell surface until 10 days postpartum. The microridge and dome in shape of the epithelium were found at 10 days postpartum, while the polygonal and exfoliating epithelium were observed at 21 days.

• 소성∙가공
• /
• 제16권7호
• /
• pp.538-548
• /
• 2007

In this paper, a novel approach which enables rapid die surface modification for sheet metal forming process is proposed. In this method an implicit surface which interpolates a given set of control points and displacement constraints is generated to compute the displacements at arbitrary points located on die surface. The proposed method does not depend on the underlying surface representation type and is affected neither by its complexity nor by its quality. In addition, the domain decomposition method is introduced in order to treat large surface model. The global domain of interest is divided into smaller domains where the problem can be solved locally. And then the local solutions are combined together to obtain a global solution. In order to verify the validity and effectiveness of the proposed method, various surface modifications are carried out fur three kinds of die surface model including polygonal surface composed of triangular and rectangular meshes, polynomial surface and NURBS surface.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.91-98
• /
• 2005

This paper presents a scheme for interpolating intersecting uniform cubic B-spline curves by Catmull-Clark subdivision surfaces. The curves are represented by polygonal complexes and the neighborhoods of intersection points are modeled by X-Configurations. When these structures are embedded within a control polyhedron, the corresponding curves will automatically be interpolated by the surface limit of subdivision of the polyhedron. The paper supplies a construction which clearly shows that interpolation can still be guaranteed even in the absence of symmetry at the X-configurations. In this sense, this scheme generalizes an already existing technique by the same authors, thereby allowing more freedom to designers.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.294-305
• /
• 2004

Highly detailed geometric models are rapidly becoming commonplace in computer graphics and other applications. These complex models, which is often represented as complex1 triangle meshes, mainly suffer from the vast memory requirement for real-time manipulation of arbitrary geometric shapes without loss of data. Various techniques have been devised to challenge these problems in views of geometric processing, not a representation scheme. This paper proposes the new mesh structure for the compact representation and the efficient handling of the highly complex models. To verify the compactness and the efficiency, the memory requirement of our representation is first investigated and compared with other existing representations. And then we analyze the time complexity of our data structure by the most critical operation, that is, the enumeration of the so-called one-ring neighborhood of a vertex. Finally, we evaluate some elementary modeling functions such as mesh smoothing, simplification, and subdivision, which is to demonstrate the effectiveness and robustness of our mesh structure in the context of the geometric modeling and processing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.922-925
• /
• 2000

As mechanical components require size minimization and high precision, micro die machining technology has been developed in many fields. to machine a micro die by EDM, sometimes, a polygonal electrode is use. Machining corners by MEDM shows special characteristics. Physically, electrons are concentrated in sharp region and a high potential level is established in this region. Also, the electrode can't be rotated when machining a polygonal cavity, and machined debris can not drawn off easily. Discharge concentration in corners and 2nd discharge by machined debris result in distortion of corner shape. This phenomena can be improved by shaking the electrode. This method is also shown to be effective in improving surface roughness by circulation of machining fluid resulting from movement of the electrode.

• Applied Microscopy
• /
• 제52권
• /
• pp.8.1-8.7
• /
• 2022

The Korean trident goby, Tridentiger brevispinis, lives in adverse habitats that can easily become hypoxic due to low precipitation, regional dry periods, and high amounts of solar radiation. Histological and morphometric studies revealed the goby's specialized skin (35.4-150.0㎛ in thickness), consisting of an epidermis and dermis. The thicker epidermis comprises an outermost surface layer (having taste buds, stratified fattened cells, mucous cells, pigment cells, and stratified polygonal cells), middle layer (having stratified polygonal cells), and stratum germinativum (stratified columnar cells). In particular, the dermis has scales, well-developed vascularization, and a few blood capillaries just above the basement membrane, and a reduced diffusion distance was present in the lateral body. Consequently, adaptations such as thicker epidermis, well-developed vascularization, few blood capillaries, and a reduced diffusion distance may provide cutaneous respiration for survival in poorly oxygenated water during the periodic dry season.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.25-32
• /
• 2014

In this study, nano-sized cobalt oxide powder with an average particle size below 50 nm was prepared from a cobalt chloride solution by the spray pyrolysis process. The influences of reaction temperature on the properties of the generated powder were examined. The average particle size of the particles formed based on the spray pyrolysis process at a reaction temperature of $700^{\circ}C$ is roughly 20 nm. Moreover, most of these particles cannot appear with an independent type, thereby coexisting in a droplet type. When the reaction temperature increases to $800^{\circ}C$, the average particle size not only increases to roughly 40 nm but also shows a more dense structure while the ratio of particles which shows a polygonal form significantly increases. As the reaction temperature increases to $900^{\circ}C$, the distribution of the particles is from roughly 70 nm to 100 nm, while most of the particle surface is more intricately close and forms a polygonal shape. When the reaction temperature increases to $1000^{\circ}C$, the particle size distribution of the powder shows an existing form from 80 nm to at least 150 nm in an uneven form. As the reaction temperature increases, the XRD peak intensity gradually increases, yet the specific surface area gradually decreases.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.77-83
• /
• 2003

We propose two algorithms to generate (1) polygonal meshes and (2) developable surface patches far generalized cylinders defined by contours of discrete curves. To solve the contour blending problem of generalized cylinder, the presented algorithms have adopted the algorithm and related properties of LIDM (linear interpolation by direction map) that interpolate geometric shapes based on direction map merging and group scaling operations. Proposed methods are fast to compute and easy to implement.