• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.1
• /
• pp.10-17
• /
• 2011

Biodegradable octopus pot was developed to reduce plastic pollution problem in the sea and fishing trouble between fishermen. It can be expect to recycle other wasted biodegrade fishing gear. Experimental fishing was carried out to understand the difference in fishing efficiency between Polyethylene (PE) octopus pots and biodegradable (Polybutylene Succinate and Polybutylene adipate-co-terephthalate) octopus pots which was tried to make in this study in the sea. There were caught by 237 numbers of fishing during the experimental period. Among the 237 numbers of fishing, 160 or 67.5% were PE pots which were more than the biodegradable pots. A comparison of the monthly catches between the PE pots and biodegradable pots shows that the catches were overall higher in the PE pots than in the other pots. The result is very similar with the comparison of total catches by each type of the pots. In terms of bycatch, the number of species, amount of catches and the number of fishing with bycatch were more significant in the biodegradable pots than in the PE pots.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.55-61
• /
• 2016

In this study, to determine whether it is possible to apply Polyethylene (PE) compound pipe, which was developed to solve the problem caused by the corrosion of the fire protection piping currently in usein water based fire extinguishing systems, we performed an actual mockup fire test. Since no test standard was available related to the developed compound pipe, we compared and analyzed domestic and international technical materials and test standards and selected suitable fire test standards to evaluate the performance of the PE compound pipe. we applied two fire test standards to the PE compound pipe, viz. those for CPVC and metallic pipes, and conducted a total of 6 experiments to evaluate its performance. According to the results of the first and second fire tests based on the test standard for the CPVC pipe, neither the fitting nor the piping was damaged or deformed and no leakage was observed in the pressure test, which was performed for 5 minutes. For the fire test based on the metallic pipe test standard, a total of 4 experiments were conducted. The first two experiments were conducted to simulate the wet piping system. In the results of this fire test, neither leakage nor rupture was observed from the PE compound pipe and no damage was caused, such as the secession of the PE material. However, in the next two experiments, which simulated the dry system, the PE compound pipe suffered damage and rupture, including deformation before the fire fighting water was discharged. Therefore, we found that the piping performance of the PE compound pipe did not undergo any deterioration, including fusion, deformation, or damage, in the wet piping system simulated fire test.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.130-133
• /
• 2002

Polyethylene pressure pipe has been used with a gas pipe material because of workability and stability etc.. Researches on characteristics of polyethylene pressure pipe are carried out, but there are rare. In this study, the tensile test was performed on polyethylene pipe. From the tensile test, AE signals were detected and estimated in real time. Also, the time-frequency analysis of AE signals was analyzed. From test results, PE pipes were displayed typical stress-strain curves oj semi-crystalline polymer. As result analyzed AE signals, could divide stress-strain curves could be divided into four stages. In the elastic region, signals were not detected. Low amplitude distributions of 30-35dB appeared after yielding, and high amplitude distributions of 30-60dB appeared with increased extension. From the time-frequency analysis of AE signals, the frequency band of 100kHz appeared mainly. Also, the frequency band of 300kHz appeared before the necking phenomenon spreads into the whole region, and the frequency band of 500kHz appeared on extension earlier.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.1
• /
• pp.7-12
• /
• 2017

Most of existing buried pipes are composed of reinforced concrete. Reinforced concrete pipes have many problems such as aging, corrosion, leaking, etc. The polyethylene (PE) pipes have advantages to solve these problems. The plastic pipes buried underground are classified into a flexible pipe. National standard that has limited the long-term vertical deformation of the pipe to 5% for flexible pipes including PE pipe. This study presents a prediction for the long-term behavior of the polyethylene pipe based on ASTM D 5365. This prediction method is presented to estimate by using the statistical method from the initial deflection measurement data. We predict the behavior of long-term performance on the double-wall pipe and multi-wall pipe. As a result, it was found that the PE pipe will be sound enough more than 50 years if the compaction of soil around the pipe is more than 95% of the standard soil compaction density.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.65-75
• /
• 1993

PP에 PE를 용융혼합하여 방사불안정성을 줄일수 있는 방사조건에 대한 연구를 수 행하였다. 연신공명에 대한 주파수 분석결과 harmonic overtone이 나타나고 연식공명의 주 기가 체류시간에 비례함을 밝혔다. PP에 PE를 혼합시킴으로써 연신공명을 줄일수 있었으나 PE가 연속상이 되는 PE함유량에서는 임계연신비보다 낮은 연신비에서 사절이 발생하였다. 또한 낮은 방사온도에서는 melt fracture 현상이 연신공명을 쉽게 일어나게 하는 용인으로 작용하여 PP/PE 혼합물의 방사 안정성을 저해하였다, 토출량이 같을 때 방사구 지름은 연 신공명의 Dmax/Dmax 값에 영향을 미치지 않았고 방사길이가 짧으면 임계연신비가 증가하였 다. 방사구 L/D가 클때에는 방사구 L/D가 연신공명에 영향을 미치지 않았으나 방사구 L/D 가 짧을 때에는 임계연신비가 크게 저하되었다.

• Preventive Nutrition and Food Science
• /
• v.6 no.2
• /
• pp.112-116
• /
• 2001

Oxidized potato starch/polyethylene (PE) cast films were prepared with different percentages of linear low density PE (LLDPE), oxidized potato starch and prooxidant. For the determination of biodegradability of the films, lignocellulose-degrading Streptomyces viridosporus T7A (ATCC 39115) was used. Films were chemically disinfected and incubated with S. viridosporus by shaking at 100 rpm at 37$^{\circ}C$ for eight weeks. Hydroxyl indices of the films by Fourier-Transform Infrared Spectroscopy, mechanical Properties of the films by Instron and film morphology by scanning electron microscope (SEM) were measured. The hydroxyl index of the film containing the oxidized potato starch incubated with S. viridosporus T7A was higher than that of the corresponding control. All the films containing 5% and 10% oxidized starch showed a decrease of tensile strength on the films after incubation when the corresponding uninoculated film was compared. In the oxidized starch/PE film incubated with S. viridosporus T7A, partial destruction of starch and PE was examined by SEM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.254-255
• /
• 2008

In this study, electrical properties of polyethylene of raised temperature resistance (PE-RT) have been studied through an examination of AC conductivity, dielectric constant, and space charge distributions. A dielectric constant was investigated by Dielectric Analyzer (DEA). Measurements of space charge distributions for PE-RT were carried out using Pulsed Electroacoustic (PEA) techniques, and it was possible to observe the negative charge near the cathode overlapped with the positive induced charge peak, the polarity of which remains unchanged after a short circuit.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.226-226
• /
• 2006

Ethylene was polymerized with a catalyst having sterically hindered pentamethylcyclopentadienyl ligand, $Cp^{\ast}_{2}ZrCl_{2}/MAO$, and the polymerization mixture were treated with dry oxygen (oxidative workup) to produce hydroxyl-terminated polyethylenes (PE-OH). Polyethylene-block-Poly (${\Box}-caprolactone$) was synthesized from PE-OH and ${\cdot}\^{A}-caprolactone$A by using stannous octoate as a catalyst for ring opening polymerization of ${\cdot}\^{A}-caprolactone$. Polyethylene-block-Poly(methyl methacrylate) was obtained by transforming the hydroxyl-terminated polyethylenes to macroinitiators for atom transfer radical polymerization (ATRP) and by reacting them with MMA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.403-408
• /
• 2007

The concrete pipe(Hume, PC) and polyethylene(PE) pipe are usually used for dram pipe in local market. Hume pipe, however, is heavy and needs the high cost of construction and PC pipe has a disadvantage to easily occur the deformation by the outside pressure even though it is light and constructible. The corrugated steel pipe coated with polyethylene is used increasedly because it is durable, constructible and economical. However, it is not used for sewage or waste water because it is hard to guarantee the watertight property on the coupling part. In this study, we studied on the flange coupling and the method of its construction to guarantee the watertight property and easy to use. If the developed flange coupling and method are used on a construction field, the economical property, constructible property and structural safety can be guaranteed.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.10
• /
• pp.5-13
• /
• 2014

In this research, in order to study insulation effect of commercial XPS and recycled PE aggregates for prevention of frost heave in the roadbed of railroad track from the freezing temperature, model tests were carried out in the large freezing room. For this, thermal conductivities were measured for various dry densities, water contents, temperatures and mixing ratios of PE aggregates. From the tests, it can be seen that thermal conductivities of roadbed decrease with the increase of the ratio of mixed PE aggregates. However it was sensitive to the changes of temperature and water content due to the amount of water in the voids. From the model test of railroad track, it can be seen that the time to reach $0^{\circ}C$ was longer for XPS than that for the PE aggregates. Also the test shows best insulation effect can be achieved when XPS board was installed above the PE aggregate layer rather than the opposite order.