• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.76-85
• /
• 2019

Recently, various investigation of vegetable oil which is extracted from natural resources is being progressed because of its low cost and environmental aspect. However, double bonds in vegetable oil should be substituted to other high reactive functional group due to its low reactivity for synthesizing bio-polymeric materials. ${\alpha}$-eleostearic acid, which is consist of conjugated triene, is the main component of tung oil, and the conjugated triene allows tung oil to have higher reactivity than other vegetable oil. In this study, tung oil is copolymerized with styrene and divinylbenzene to make thermoset resin without any substitution of functional group. Thermal and mechanical properties are measured to investigate the effects of the composition of each monomer on the synthesized thermoset resin. The result shows that the products have only one Tg, which means the synthesized thermoset resins are homogeneous in molecular level. Mechanical properties show that tung oil act as soft segment in the copolymer and make more elastic product. On the other hand, divinylbenzene acts as hard segment and makes more brittle product.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.1
• /
• pp.11-16
• /
• 2019

This study analyzed various packaging materials and types for frozen foods and the effects of packaging materials on temperature changes during frozen process. Pouches with different film thickness were prepared and placed in an IQF freezer, then the temperature inside pouches measured using a deep thermometer. The most common types of primary packaging for frozen foods in the market was plastic pouches with polyethylene or polyamide/polyethylene multilayer materials. The temperature change inside of packaging was delayed with film thickness increased. As the size of packaged food increased, the temperature change inside the food was slowed down. In addition, the pouches with air inside took more time to reach $-30^{\circ}C$ compared to pouches with less air during frozen process. This study provides information on packaging materials and types for frozen foods and preliminary data of temperature change by different types of packaging.

• Membrane Journal
• /
• v.31 no.1
• /
• pp.16-34
• /
• 2021

Water supplies are decreasing in comparison to increasing clean water demands. Using nanofiltration is one of the most effective and economical methods to meet the need for clean water. Common methods for desalination are reverse osmosis and nanofiltration. However, pristine membranes lack the essential features which are, stability, economic efficiency, antibacterial and antifouling performances. To enhance the properties of the pristine membranes, graphene oxide (GO) is a promising and widely researched material for thin film composites (TFC) membrane due to their characteristics that help improve the hydrophilicity and anti-fouling properties. Modification of the membrane can be done on different layers. The thin film composite membranes are composed of three different layers, the top filtering active thin polyamide (PA) layer, supporting porous layer, and supporting fabric. Forward osmosis (FO) process is yet another energy efficient desalination process, but its efficiency is affected due to biofouling. Incorporation of GO enhance antibacterial properties leading to reduction of biofilm formation on the membrane surface. Pressure retarded osmosis (PRO) is an excellent process to generate clean energy from sea water and the biofouling of membrane is reduced by introduction of GO into the active layer of the TFC membrane. Different modifications on the membranes are being researched, each modification with its own advantages and disadvantages. In this review, modifications of nanofiltration membranes and their composites, characterization, and performances are discussed.

• Journal of Life Science
• /
• v.33 no.2
• /
• pp.216-226
• /
• 2023

Since nylon 66, a polyamide resin, has been developed and applied to toothbrush bristles, plastic consumption has increased rapidly every year, along with the increase in the amount of plastic discarded. Among the various forms of plastic debris produced by the decomposition of plastics, microplastics with a size of less than 5 mm are widely distributed in the environment, which poses a threat not only to the environment but also to animals and humans. The pathway through which microplastics enter the human body is known as ingestion by water and food, inhalation from air, and skin contact. Microplastics introduced into the human body affect human health. Recently, food-related studies have begun to be reported among microplastics-related studies, and analyses of the presence of microplastics in processed foods, such as canned foods, dried seaweed, beverages, beer, milk, sugar, and honey, are underway. Here, we present trends in the production and consumption of plastics, the generation of microplastics, the route of human inflow and human risk, and the microplastics present in processed foods, which are limited but have recently been reported. Thus far, studies on microplastics and risk assessment in processed foods have been insufficient, but microplastics are gradually being recognized as a factor that affects the environment and food. Future studies are expected to have implications for regulations regarding microplastics present in processed foods.

• Molecules and Cells
• /
• v.45 no.12
• /
• pp.886-895
• /
• 2022

Malignant rhabdoid tumor (MRT) is a highly aggressive pediatric malignancy with no effective therapy. Therefore, it is necessary to identify a target for the development of novel molecule-targeting therapeutic agents. In this study, we report the importance of the runt-related transcription factor 1 (RUNX1) and RUNX1-Baculoviral IAP (inhibitor of apoptosis) Repeat-Containing 5 (BIRC5/survivin) axis in the proliferation of MRT cells, as it can be used as an ideal target for anti-tumor strategies. The mechanism of this reaction can be explained by the interaction of RUNX1 with the RUNX1-binding DNA sequence located in the survivin promoter and its positive regulation. Specific knockdown of RUNX1 led to decreased expression of survivin, which subsequently suppressed the proliferation of MRT cells in vitro and in vivo. We also found that our novel RUNX inhibitor, Chb-M, which switches off RUNX1 using alkylating agent-conjugated pyrrole-imidazole polyamides designed to specifically bind to consensus RUNX-binding sequences (5'-TGTGGT-3'), inhibited survivin expression in vivo. Taken together, we identified a novel interaction between RUNX1 and survivin in MRT. Therefore the negative regulation of RUNX1 activity may be a novel strategy for MRT treatment.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.95-102
• /
• 2016

This study investigated the effects of the oxygen permeability of vacuum packaging film and the storage temperature on the quality and shelf life of Hamburg steaks during storage for 14 days. Control samples (C) were packaged in a polyamide/polyethylene (PA/PE) film and stored at $5^{\circ}C$. Treatment samples were either packaged in an ethylene vinyl alcohol/polyethylene (EVOH/PE) copolymer film and stored at $5^{\circ}C$ (T1), and in a PA/PE film and stored at $-18^{\circ}C$ (T2). The initial total plate count (TPC) was 3.6 log cfu/g. In T1 samples, TPC and Brochothrix thermosphacta counts were increased, similar to those in C samples, whereas Pseudomonas spp. counts were significantly lower than those in C samples during storage. Over the storage period, the volatile basic nitrogen values increased most rapidly in C samples, followed by T1 and then T2 samples. The values of thiobarbituric acid reactive substances steadily increased in all samples during storage. The colour parameters were not significantly different among the samples during storage. T1 samples maintained sensory qualities in flavour and off-odour parameters for two days longer than C samples did. At day 12, T2 samples were evaluated as being below the marketability score of 5.0 for texture. In conclusion, using high oxygen barrier films like EVOH/PE copolymer for packaging Hamburg steaks could extend the sensory qualities in view of flavour and off-odour during chilled storage. However, frozen storage at $-18^{\circ}C$ is recommended when the storage period is extended beyond 14 days at $5^{\circ}C$.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.81-86
• /
• 2015

The purpose of our paper was to investigate the migration level of 4,4'-MDA(4,4'-methylenedianiline), 2,4-TDA(2,4-toluenediamine), aniline, acrylonitrile and methylmeth acrylate from plastic cookwares into food simulants and to evaluate the safety of each monomers. The test articles for monomers were PA (polyamide) items for 4,4'-MDA, 2,4-TDA and aniline, PU (polyurethane) items for 4,4'-MDA, ABS (acrylonitrile-butadiene- styrene) items for acrylonitrile, and acrylic resin items for methylmethacrylate. All the article samples of 321 intended for contact with foods were purchased in domestic market. 4,4'-MDA, 2,4-TDA and aniline were analyzed by LC-MS/MS (liquid chromatography -tandem mass spectrometer), acrylonitrile by GC-NPD (gas chromatography-nitrogen phos phorus detector) and methyl methacrylate by GC-FID (gas chromatography-flame ionization detector). The migration level of monomers were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intake (EDI, mg/kg bw/day)s were $2.39{\times}10^{-9}$ and $1.20{\times}10^{-9}$ for 4,4'-MDA and 2,4-TDA of PA, $4.32{\times}10^{-9}$ for acrylonitrile of ABS and $2.27{\times}10^{-7}$ for methylmethacrylate of acrylic resin. Reference Dose (RfD, mg/kg bw/day) of acrylonitrile and tolerable daily intake (TDI, mg/kg bw/day) of methacrylate were established respectively as 0.001 by EPA (US Environmental Protection Agency) and as 1.2 by WHO (World Health Organization). When comparing with RfD and TDI, the EDIs of acrylonitrile and methylmethacrylate accounted for $4.32{\times}10^{-4}%$ and $1.89{\times}10^{-5}%$ respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1753-1759
• /
• 2009

The present study was conducted to investigate the effects of components obtained from Zanthoxylum schinifolium and Zanthoxylum piperitum on rancidity and quality of Kwamegi (semi-dried Pacific saury, Coloabis saira). Ethanol extract (ZS) of Zanthoxylum schinifolium leaves or the essential oil (ZP) obtained from pericarp of Zanthoxylum piperitum in 1 or 20% ethanol solution was sprayed to the Pacific saury before Kwamegi preparation at its final concentrations of 0.125~2 ppm in the Kwamegi. The prepared Kwamegi was vacuum packed with multi-layered film (polyethylene/polyamide/EVOH/polyethylene, thickness 80 μm) and kept at -20${^{\circ}C}$ until use. After opening the package Kwamegi was stored at 4${^{\circ}C}$ for 1, 3 and 7 days during which rancidity tests and sensory evaluation were carried out. Acid, peroxide, and thiobarbituric acid (TBA) values increased with storage time but reduced significantly by the addition of ZS at the concentrations of ≥G0.125 ppm and ZP≥F0.25 ppm. The effects of ZS and ZP were dose-dependent and more pronounced as storage time prolonged. The ZS and ZP also reduced dimethyamine and trimethyamine (TMA) contents which were increased with time, while they prevented the decrease of trimethyamine oxide. The ZS at the concentration of ≥G0.25 ppm and the ZP at >0.5 ppm were needed to maintain TMA less than 4.5 mg/100 g for 3 day storage at 4${^{\circ}C}$. Sensory evaluation of the Kwamegi exhibited a slightly higher preference with the ZS and ZP treated ones at the level of 0.25~0.5 ppm. It is concluded that very low amounts of ZS and ZP are effective in suppression of rancidity of Kwamegi and could be utilized for its quality management.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.351-360
• /
• 2017

We have studied the technology to extend the storage period of 'Seolhyang' strawberries using modified atmosphere package (MAP) and ethyl pyruvate (EP) treatment for domestic distribution and export. The selected ripe strawberries harvested on December 28, 2016 at the Sancheong farmhouse were transported to the laboratory for 2 h and tested. After a day's precooling at $4^{\circ}C$, the strawberries were divided into seven experimental groups. These groups were control, active MAP using low density polyethylene (LDPE), active MAP using polyamide (PA), active MAP using PA with EP treatment, passive MAP using LDPE, passive MAP using PA and passive MAP using PA with EP treatment. Quality analysis was carried out every 4 days during the storage period of 16 days. During the storage period of 16 days, MAP decreased from 3.5% to less than 1.1% in weight loss ratio compared with control, and decreased from 36% to less than 7% in fungal incidence. In the case of fungi in the EP treatment group, hyphae did not grow on the outside of the strawberry but grew to the inside. This tendency was similar to that in the low oxygen and high carbon dioxide environment of the MAP, the mycelium of the fungus did not grow outside of the strawberry. Fungi are the biggest problem in the distribution and export of strawberries, and these results suggest that MAP alone could inhibit mold and increase shelf life.