• Macromolecular Research
• /
• v.10 no.6
• /
• pp.339-344
• /
• 2002

Poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) diblock copolymer containing high syndiotactic poly (vinyl alcohol) (PVA) was synthesized by the saponification of poly(vinyl pivalate-b-styrene) (poly(VPi-b-St)). For the block copolymer, poly(vinyl pivalate) (PVPi) with trichloromethyl end group was obtained via telomerization of vinyl pivalate with carbon tetrachloride as a telogen and 2,2-azobisisobutyronitrile (AIBN) as an initiator. Then resulting poly(vinyl pivalate) with trichloromethyl end group was used as an effient macroinitiator for the synthesis of poly(VPi-b-St) using atom transfer radical polymerization (ATRP) in the presence of CuCl/2,2'-bipyridine at 130 $^{\circ}C$. The poly(vinyl pivalate) macroinitiator, poly(VPi-b-St), poly(VA-b-St) were characterized by GPC, FT-IR and $^1$H-NMR. And the analysis showed that integrity of the block copolymer was maintained during saponification reaction.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.291-292
• /
• 2003

Amphiphilic block copolymer는 self-assembly특성을 가지고 있기 때문에 선택된 용매 속에서 nanoscale-domain 즉 micelle을 형성할 수 있다. 이러한 특성은 기타 불용성 물질을 가용화하고 colloidal particle을 안정화시키거나 micro-emulsion을 형성할 수 있어 pharmaceutics, drug delivery system등 영역, 그리고 emulsion stabilizer, thickener, dispersion agent등으로 사용될 수 있다. (중략)

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.504-509
• /
• 2006

Poly(vinyl phosphate-b-styrene) (PVPP-b-PS) block copolymers were synthesized successfully from poly(vinyl alcohol-b-styrene) (PVA-b-PS) by reaction with phosphorus oxychloride and subsequent hydrolysis. The obtained block copolymers were slightly crosslinked, and were characterized by various analytical techniques. The total phosphorus content and the ratio of the differently bound phosphorus were obtained by both solid-state $^{31}P$ NMR and pH titration, but the results differed slightly. Characterization by energy dispersion X-ray analysis (EDS) or Rutherford back scattering (RBS), on the other hand, determined the total phosphorus contents, but the results were quite different from those by solid-state $^{31}P$ NMR.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.549-554
• /
• 2008

Proton conducting crosslinked membranes were prepared using polymer blends of polystyrene-b-poly(hydroxyethyl acrylate)-b-poly(styrene sulfonic acid) (PS-b-PHEA-b-PSSA) and poly(vinyl alcohol) (PVA). PS-b-PHEA-b-PSSA triblock copolymer at 28:21:51 wt% was synthesized sequentially using atom transfer radical polymerization (ATRP). FT-IR spectroscopy showed that after thermal ($120^{\circ}C$, 2 h) and chemical (sulfosuccinic acid, SA) treatments of the membranes, the middle PHEA block of the triblock copolymer was crosslinked with PVA through an esterification reaction between the -OH group of the membrane and the -COOH group of SA. The ion exchange capacity (IEC) decreased from 1.56 to 0.61 meq/g with increasing amount of PVA. Therefore, the proton conductivity at room temperature decreased from 0.044 to 0.018 S/cm. However, the introduction of PVA resulted in a decrease in water uptake from 87.0 to 44.3%, providing good mechanical properties applicable to the membrane electrode assembly (MEA) of fuel cells. Transmission electron microscopy (TEM) showed that the membrane was microphase-separated with a nanometer range with good connectivity of the $SO_3H$ ionic aggregates. The power density of a single $H_2/O_2$ fuel cell system using the membrane with 50 wt% PVA was $230\;mW/cm^2$ at $70^{\circ}C$ with a relative humidity of 100%. Thermogravimetric analysis (TGA) also showed a decrease in the thermal stability of the membranes with increasing PVA concentration.