• 대한약학회:학술대회논문집
• /
• 대한약학회 2000년도 NEW STRATEGY FOR DRUG DEVELOPMENT IN POST-GENOMIC ERA(대한약학회)
• /
• pp.268.2-269
• /
• 2000

• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.225-232
• /
• 1988

Poly (L- lactic acid-co-glycine-L-lactic acid) and Poly (L-lactic acid-co-glycine-L- methyl lactic acid ) have been prepared by ring opening polymerization. The monomer 6, 6-dimethyl morpho-line-2, 5-dione was synthesized by the bromoisobutylation of 2-bromoisobutyryl bromide with glycin e. L-lactide, 6-methyl morpholine-2, 5-diode. and 6, 6-dimethyl morpholine-2, 5-diode have been used as starting materials for polydepsipeptides. The synthesized monomers and copolymers have been identified by NMR and FT-lR spa- ctrophotometer. The thermal propert ies and glass transition temperature(Tg) of the copolymers have been measured by differential scanning calorimetry. The Tg values of poly(L-lactic acid co-glycine-L-lactic acid) system are increased from $53^{\circ}C\; to\; 107^{\circ}C$ with increasing the mole fraction of 6-methyl morpholine-2, 5-diode. And the Tg values of poly(L-lactic acid co-glycine-L-methyl lactic acid) system are increased from $53^{\circ}C\;to\;138^{\circ}C$ with increasing the mole fraction of 6. 6-dimethyl morpholine-2, 5-diode The thermal stability of poly (L-lactic acid-co-glycine-L-methyl lactic acid) is slightly greta text than that of poly(L-lactic acid-co-glycine-L-lactic acid) due to the methyl group.

• 대한의용생체공학회:의공학회지
• /
• 제41권1호
• /
• pp.62-66
• /
• 2020

Controlled drug release is important for effective treatment of cancer. Poly(DL-lactide-co-glycolide) acid (PLGA) is a Food and Drug Administration (FDA) approved polymer and have been extensively studied as drug delivery carriers with biodegradable and biocompatible properties. However, PLGA drug delivery carriers are limited due to the initial burst release of drug. Certain drugs require an early rapid release, but in many cases the initial rapid release can be inefficient, reducing therapeutic effects and also increasing side effects. Therefore, sustained release is important for effective treatment. Poly Lactic Acid stereo complex (PLA SC) is resistant to hydrolysis and has high stability in aqueous solutions. Therefore, in this work, PLGA based discoidal polymeric particles are modified by Poly Lactic Acid stereocomplex (PLAsc DPPs). PLAsc DPPs are 3 ㎛ in diameter, also showing a relatively sustained release profile. Fluorescein 5(6)-isothiocyanate (FITC) released from PLAsc DPPs was continuously observed until 38 days, which showed the initial release of FITC from PLAsc DPPs was about 3.9-fold reduced as compared to PLGA based DPPs at 1 hour.

• 멤브레인
• /
• 제24권2호
• /
• pp.113-122
• /
• 2014

상전이 과정을 통하여 poly(L-lactic acid) 재질의 다공성 스캐폴드 막을 제조하였다. 비용매로는 에탄올을 사용하였고, 용매로서 chloroform, dichloromethane 및 1,4-dioxane을 사용하였으며, 제조한 스캐폴드 막의 모폴로지와 기계적 강도 및 물질전달 특성은 각각 SEM, 인장강도실험 및 당 확산실험을 통하여 측정, 평가하였다. chloroform을 용매로 사용한 스캐폴드 막과 dichloromethane을 용매로 사용한 스캐폴드 막은 서로 유사한 모폴로지와 기계적 특성을 보였다. 이들 스캐폴드 막은 공극 직경 $3-10{\mu}m$의 다공성 스펀지 구조를 보였으며, 범위 50-80%의 공극률을 보였다. 1,4-dioxane 용매의 용액으로부터 제조된 스캐폴드 막은 공극률 80% 이상의 나노섬유 형태를 보였다. 캐스팅 용액 내의 고분자 함량이 4% 이하로 낮추었을 때에는 나노섬유 구조의 바탕에 수십 ${/mu}m$의 거대 공극이 존재하는 높은 공극률(90%)을 갖는 스캐폴드 막이 얻어졌다. 이러한 결과를 통하여 스캐폴드 막의 구조에 대하여 용매는 중요한 효과를 미치며, 상전이 과정에서 용매선택과 캐스팅 용액의 농도 조절을 통하여 다양한 구조의 스캐폴드 막을 제조할 수 있다는 결론을 도출하였다.

• 멤브레인
• /
• 제25권1호
• /
• pp.48-59
• /
• 2015

순수용매와 혼합용매를 사용한 상전이를 통하여 poly(L-lactic acid) (PLLA) 스캐폴드 막을 제조하였다. 순수용매로서 chloroform과 1,4-dioxane을 사용하였으며, 이들 순수용매를 혼합하여 혼합용매를 제조하였다. 스캐폴드 막의 모폴로지, 기계적 특성 그리고, 물질전달 특성을 각각 SEM, 인장강도실험 및 당 확산실험을 통하여 측정, 평가하였다. 순수 chloroform 용매를 사용한 용액으로부터는 격벽-공극 구조(solid-wall pore structure)의 스캐폴드 막이 제조되었다. 반면, 순수 1,4-dioxane 용매를 사용한 용액으로부터는 나노섬유 구조의 스캐폴드 막이 제조되었다. 혼합용매의 경우 용매 내의 조성이 변화하면서 다양한 구조의 스캐폴드 막이 제조되었다. 혼합용매 내 1,4-dioxane 함량이 20% 이하인 경우에는 격벽-공극 구조의 스캐폴드 막이 제조되었으며, 1,4-dioxane 함량이 20%인 경우에는 최대직경 $100{\mu}m$의 거대공극을 갖는 구조를 보였다. 1,4-dioxane 함량이 25% 이상인 구간에서는 나노섬유 구조의 스캐폴드 막이 제조되었다. 이 구간에서는 혼합용매 내 1,4 dioxane 함량이 변화함에 따라 나노섬유의 직경이 함께 변화하였다. 나노섬유의 최소직경은 15 nm 가량이었으며, 혼합용매 내의 1,4-dioxane 함량이 80 wt%일 때에 얻어졌다. 이상의 결과를 통하여 용매의 조성은 스캐폴드 막의 구조를 결정짓는 중요한 요소가 된다는 결론을 얻을 수 있었다.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.259-266
• /
• 2001

Multiblock copolymer was synthesized by the copolycondensation of oligo(L-lactic acid) prepared by thermal dehydration of L-lactic acid, Pluronic$\^$TM/(PN) and dodecanedioic acid as carboxyl/hydroxyl adjusting agent. This polycondensation proceeded by catalysis of stannous oxide to give the multiblock copolymers with high molecular weight and wide range of compositions. Polymer film was prepared by casting the chloroform solution of the multiblock copolymers having different composition. The multiblock copolymers having relatively high contents of poly(L-lactide) were melt spun into filaments which were subsequently drawn at 60$^{\circ}C$. The copolymer films and the filaments showed an improved flexibility due to the incorporation of the soft segments.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.42-46
• /
• 2003

Cell attachment and proliferation on the polymer films of triblock copolymer(ester-ether)s comprising po1y (L-1actide) (PLLA) and poly (oxyethylene-co-oxypropylene)(PN) were investigated using 3T3 fibroblasts. It was found that on the tissue culture polystyrene(TCPS) and the PLLA control film the cells could spread well while on the copolymer films the cells showed a rounded morphology without spreading and proliferated weakly. Especially, little cells proliferated on the films of copolymer having a LN composition of 20 wt%. While the water absorption of the copolymer films increased with increasing PN content, the contact angle against water of copolymer films immersed in aqueous medium was almost identical, being slightly lower than that of the PLLA film. These properties were compatible with the results of cell attachment. The in vitro hydrolysis of the films of triblock and multiblock type copolymers was faster with increasing PN content. The increased hydrolyzability, the flexibility and the decreased cell attachment suggested that these copolymers may have high potential as biodegradable materials for medical use.

• 폴리머
• /
• 제39권1호
• /
• pp.40-45
• /
• 2015

혈항혈전성 표면의 제조를 위해 간단한 비용매 휘발 방법을 통하여 고탄성체이면서 생분해성 폴리 락티드-카프로락톤 공중합체 필름의 표면상에 연잎 구조물과 유사한 마이크로 돌기를 만들어 주었다. 표면 구조와 소수성도, 항혈전 효과 등을 시험했으며, 결정화도와 탄성회복률 등의 물리적 특성도 분석하였다. 그 결과 비용매와 메틸렌클로라이드의 혼합 부피비 1:2에서 연잎표면과 유사한 최적의 효과를 얻었으며, 이때 수접촉각은 $124^{\circ}$였다. 혈소판 부착시험에서는 처리하지 않는 군에 비해 약 10%만 부착되는 효과를 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제31권3호
• /
• pp.191-196
• /
• 2001

Biodegradable polymeric microspheres were studied for their usefulness as carriers for the delivery of vaccine antigens. However, protein antigen could be denatured during microencapsulation processes due to the exposure to the organic phase and stress condition of cavitation and shear force. Therefore this study was carried out to re-evaluate the degree of protein denaturation during microencapsulation with poly(lactide-co-glycolide) (PLGA) copolymer. PLGA microspheres containing ovalbumin (OVA), prepared by W/O/W multiple emulsification method, were suspended in pH 7.4 PBS and incubated with shaking at $37.5^{\circ}C$. Drug released medium was collected periodically and analyzed for protein contents by micro-BCA protein assay. In order to evaluate the protein integrity, release medium was subjected to the analyses of SDS-PAGE and size exclusion chromatography (SEC). And enzyme-linked immunosorbent assay (ELISA) was introduced to measure the immunoreactivity of entrapped OVA and to get an insight into the three-dimensional structure of epitope. The structures of entrapped protein were not affected significantly by the results of SDS-PAGE and SEC. However, immunoreactivity of released antigen was varied, revealing the possibility of protein denaturation in some microspheres when it was evaluate by ELISA method. Therefore, in order to express the degree of protein denaturation, antigenicity ratio (AR) was obtained as follows: amount of immunoreactivity of OVA/total amount of OVA released ${\times}100(%)$. ELISA method was an efficient tool to detect a protein denaturation during microencapsulation and the comparison of AR values resulted in more accurate evaluation for immunoreactivity of entrapped protein.

• Journal of Pharmaceutical Investigation
• /
• 제32권3호
• /
• pp.199-207
• /
• 2002

In order to develop a sustained release formulation of bovine somatotropin (BST), which has been used to increase the body weight of oxen or the milk production of dairy cows, poly(D,L-lactide-co-glyceride)(PLGA) microspheres were made by W/O/W multiple emulsification method and solvent extraction method. Physical properties including particle size, drug entrapment, drug release, protein denaturation, and in vivo body weight increase in rats were characterized. The size of the microspheres was increased as the molecular weight of PLGA increased. When Span 65 and stearic acid during preparation were added, the size was decreased but the amount of surface protein was increased, resulting in a high loading efficiency, with fast release of BST from the microspheres. Aggregation or fragmentation of BST by SDS-PAGE during microsphere preparation and drug release study was not observed. Body weight of Sprague-Dawley's male rats was significantly increased after subcutaneous administrations of BST-loaded PLGA microspheres. There was a good correlation between in vivo weight gain and in vitro release rate of microspheres. PLGA microspheres with a high surface protein ratio could be a good candidate for the sustained delivery of BST.