• 한국환경과학회지
• /
• 제23권3호
• /
• pp.473-481
• /
• 2014

Poly(lactide)s(PLA) is an attractive material to solve the problem of waste plastic accumulation in nature because of its biodegradability. The lactide exists in three stereoisomeric configurations: L-lactide, D-lactide, and meso-lactide. PLA stereocomplexes, formed by the mixing of two enantiomers, poly(L-lactide)(PLLA) and poly(D-lactide)(PDLA), have many favorable characteristics because the stereocomplex showed $50^{\circ}C$ higher melting point than each enantiomeric polymer and the resistance toward degradation increased. In this study, we investigated the influence of the composition and the optical purity of each component on the formation of stereocomplexes. Also, the nanofibers of stereochemical PLA and their blends were prepared by electrospinning method. The properties of the obtained fibers were analyzed by differential scanning calorimetry and scanning electron microscopy. The results showed that a degree of stereocomplex was controlled by change of optical purity of each component. The enzymatic degradation of the fibers were strongly dependent on the stereocomplex.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.29-36
• /
• 1998

Poly(L-lactide) microcapsules containing hydrophilic penetrate were prepared by interfacial precipitation method through solvent evaporation from w/o/w emulsion. Effect of four determinative process parameters on the particle size distributions, morphologies, and release properties of microcapsules coated with poly(L-lactide) was investigated. Moreover, susceptible functional cotton fabrics treated with the mentioned microcapsules were prepared and laundry test up to 15 times were done to determine fastness properties. As a result, the prepared poly(L-lactide) microcapsules with a more sharp-distributive, rounder, and more permeable membranes could be prepared by means of protective colloid concentration, solution volume and stirring rate.

• 대한화학회지
• /
• 제34권2호
• /
• pp.203-210
• /
• 1990

의약 전달체에 사용되는 생체분해성 고분자로서 L-lactic acid 와 L-glutamic acid가 각기 다른 조성비로 이루어진 공중합체를 합성하였다. Poly (L-lactide)는 zink oxide를 이용하여 합성하였으며, Poly (L-lactide) 말단에 3-Amino-l-propanol을 도입시킨 다음 이미 합성된 γ-benzyl-L-glutamate-N-carboxyanhydride (γ-BLG-NCA)를 개환중합시켜서 block copoly (L-lactide-γ-benzyl-L-glutamate)를 합성하였다. NMR로써 L-lactide와 γ-BLG-NCA가 서로 일정한 비율로 이루어진 공중합체가 합성되었음을 확인하였으며, 생성된 공중합체들의 열적성질은 시차주사열량계법 및 열무게 측정법으로 조사하였다.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.84-91
• /
• 2001

Both A-B-A triblock and multiblock copoly(ester-ether)s consisting of poly(L-Lactide) and poly(oxyethylene-co-oxypropylene) were prepared and characterized. The preparation of the triblock copolymer was done by ring-opening copolymerization of L-lactide with a commercially available telechelic copolyether, Pluronic$\^$TM/(PN) by catalysis of stannous octanoate. The molecular weight and unit composition of the produced copolymers were successfully controlled by changing the L-lactide/PN ratio in feed. However, a high molecular weight copolymer incorporating PN in large amount was not obtained because the molecular weight of the resulting copolymer was limited at a high L-lactide/PN composition. The multiblock copolymer was synthesized by the copolycondensation of oligo(L-lactic acid) prepared by thermal dehydration of L-lactic acid, PN, and dodecanedioic acid as carboxyl/hydroxyl adjusting agent. This polycondensation proceeded by catalysis of stannous oxide to give multiblock copolymers with high molecular weight and wide range of compositions.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.550-553
• /
• 2000

The polymeric matrices made with poly(D,L-lactide-co-glycolide) were prepared using copolymer of poly(D,L-lactide) and poly(ethylene glycol) for application of drug delivery systems. Catalyst made use of stannous actoate. Particle size were differ greatly$(435.3{\pm}11.2{\sim}2284.1{\pm}188.5)$ that nanoparticle made use of according to solvent of various kinds. Polymer could a sharp distinction with copolymerized among LE-1, LE-2 and LE-3 of PLA and PEG of content that to examine $^1H-NMR$ of copolymer make refine and reprecipitation. Drug delivery effect at PLGA nanoparticle : PLA amount more then proved highly drug delivery amount that each LE-1, LE-2, LE-3, drug and solvent was 40mg, 20mg and 10mg. Drug delivery effect proved higher 20mg that change(10mg, 20mg, 40mg) at drug feeding amount with LE-2. The first a lot of drug proved delivery. LE-3 most lactide content proved much delivery since biodegradable on PLGA copolymer result from lactide. Also biodegradable rate was highest at LE-3 much of lactide content, because influence at biodegradable effect of lactide by inclusive of soft PEG.

• 폴리머
• /
• 제36권6호
• /
• pp.699-704
• /
• 2012

경구투여를 통한 친수성 약물의 방출조절을 위하여 이중층으로 된 고분자 담체를 설계하였다. 생체고분자인 alginate와 chitosan은 각각 극성 흡수성분으로, poly(D,L-lactide)는 소수성 피막으로, 그리고 theophylline과 diclofenac sodium은 모델 약물로 사용하였다. 담체는 지연방출과 이어지는 지속방출을 위하여 외부 껍질은 poly(D,L-lactide)로, 내부중심은 약물과 함께 알지네이트 또는 키토산으로 구성되어진 이중층의 미립구 담체로 성형하였다. 담체와 약물간의 극성 조합으로 인한 담체의 모폴로지와 약물방출 거동을 조사하였다. 담체와 약물 그리고 pH 환경의 상대적 극성이 약물방출 특성에 상당한 영향이 있음을 확인하였다.

• KSBB Journal
• /
• 제14권3호
• /
• pp.297-302
• /
• 1999

Poly(DL-lactide)로 피막된 고분자 매트릭스를 약물전달시스템에 이용하기 위해 키토산, 키토산 염산염 및 술폰화 키토산으로 제조되었다. 모델 약물로 프레드니솔론을 사용하는 본 약물방출에 관한 연구는 pH 1.2 염산 용액에서 실험을 하였다. 약물 방출 속도는 고분자 매트릭스의 함유량이 증가할 수록 감소하였다. 피막된 고분자 매트릭스의 종류에 따라 지연된 약물의 방출시간은 키토산의 경우가 가장 길었으며, 술폰화 키토산, 키토산 염산염의 순서였다. DL-PLA로 피막된 고분자 매트릭스가 피막되지 않는 고분자 매트릭스 보다 약물 방출시간이 2배 정도의 지연되었을 뿐만 아니라 초기에 약물 과잉방출 현상도 작아 피막된 경우가 방출 조절형 제재로서 더 바람직한 결과를 보였다. 따라서 DL-PLA로 피막된 고분자 매트릭스는 장시간의 약물 방출을 위한 약물전달체로써의 응용이 기대된다.

• 폴리머
• /
• 제26권5호
• /
• pp.582-588
• /
• 2002

DL-lactide의 단점을 개선할 목적으로 개환중합법으로 촉매로서 diethylzinc (ZnEt$_2$)를 사용하여, poly(ethylene oxide) (PEO)를 세그먼트로서 도입한 블록공중합체를 합성하였다. 그 결과 DL-lactide에 대한 PEO세그먼트의 첨가비가 30% 이상에서는 조성비가 급격히 증가하였으며, 이들 공중합체를 캐스트법에 의해 필름으로 제작하여 6$0^{\circ}C$에서 2.5배 연신하여 인장실험을 실시하였다. 모든 공중합체 필름은 PDLLA에 대한 PEO에스테르 첨가비의 증대에 따라 탄성율이 저하되는 것이 관찰되어 세그먼트 도입에 의한 유연성의 증대를 확인하였으며 유연성이 요구되는 의용재료로서의 기대를 높였다.

• Archives of Pharmacal Research
• /
• 제16권4호
• /
• pp.312-317
• /
• 1993

To confirm a new evaluation tedhnique for biodegradability of biopolymer microsphers in vivo condition, magnetic microsphere sytem was adopted for tracing the microspheres injected and lodged in micr. Microsphers of poly(DL-lactic acid), poly(L-alctic acid) and poly(DL-lactide-coglycolide)(PLGA) were prepared by solvent-extraction method and their organ distribution and biodegradation in mice was examined. Magnetic microspheres lodged in mice organs were recollected from the homogenates of mice organs with a constant flow magnetic separation apparatus. Recollected microspheres were observed by scanning electron microscopy and also were assayed for their magnetite ocntent by atomic absorption spectrophotometry to evaluate the biodegradability of polymeric microspheres. This method seems to be practical and simple to estimate the biodegradability of biopolymers over the conventional methods.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.97-97
• /
• 2003

Recently, attention has been paid to biodegradable polymers in relation to the global environment. Poly-lactide (PLA) is one of such polymers and has studied by some investigators. In this study, the changes of crystal structure, crystal orientation and supermolecular structure of Poly(L-lactide) (PLLA) during drawing or annealing have been investigated.