• Transactions on Electrical and Electronic Materials
• /
• 제4권1호
• /
• pp.15-20
• /
• 2003

NiCr alloys are prepared onto poly-Si/ $SiO_2$/Si substrates to replace Pt bottom electrode with a new one for integration of high dielectric constant materials. Alloys deposited at Ni and Cr power of 40 and 40 W showed optimum properties in the composition of N $i_{1.6}$C $r_{1.0}$. The grain size of films increases with increasing deposition temperature. The films deposited at 50$0^{\circ}C$ showed a severe agglomeration due to homogeneous nucleation. The NiCr alloys from the rms roughness and resistivity data showed a thermal stability independent of increasing annealing temperature. The 80 nm thick BST films deposited onto N $i_{1.6}$C $r_{1.0}$/poly-Si showed a dielectric constant of 280 and a dissipation factor of about 5 % at 100 kHz. The leakage current density of as-deposited BST films was about 5$\times$10$^{-7}$ A/$\textrm{cm}^2$ at an applied voltage of 1 V. The NiCr alloys are possible to replace Pt bottom electrode with new one to integrate f3r high dielectric constant materials.terials.

• 한국어병학회지
• /
• 제22권2호
• /
• pp.147-153
• /
• 2009

To study the biological activity of interleukin-$1\beta$(IL-$1\beta$), a proinflammatory cytokine, in nile tilapia, Oreochromis niliticus, the recombinant tilapia IL-$1\beta$ was produced in E. coli cells based on pQE vector. Ni-NTA (nitriloacetic acid) metal affinity chromatography was used to purify recombinant protein. The eluted fractions exhibited a single band of protein with a molecular weight of about 25kDa, which is in close agreement with 25.4 kDa predicted by the cDNA sequence. The biological activity of the purified recombinant tilapia IL-$1\beta$ was tested through its effects on IL-$1\beta$ gene expression, which are known as IL-$1\beta$ inducible genes in mammals and fishes. IL-$1\beta$ gene expression induced by poly I:C, a synthetic double stranded RNA, was also assessed in tilapia head kidney cells. IL-$1\beta$ gene expression was analysed using QPCR (quantitative polymerase chain reaction). The ratio of the indicated gene expression was expressed as the relative mRNA level to $\beta$-actin mRNA level, which is constitutively expressed in macrophages. Consequently, head kidney cells incubated for three hours with rIL-$1\beta$(10, 2, 1 $\mu{g}$/ml) showed a dose dependent increase in IL-$1\beta$ mRNA levels and 1 $\mu{g}$/ml of poly I:C was also able to induce IL-$1\beta$ gene expression in head kidney in tilapia.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.635-639
• /
• 2008

Objectives : the effect of different sterilization methods on the surface morphology of PPDO-hybrid-PLGA nanofiber scaffold and attachments of PC12 cell were investigated. Methods : Poly (p-dioxone)-hybrid-Poly (lactide-glycolide) (PPDO-hybrid-PLGA) nanofiber scaffold, fabricated in a tube form with 1.5 mm internal diameter, 0.2 mm thickness and 5 mm length, was prepared using electrospinning method. To study the surface morphology using SEM, The study group and control group in respective were; Control:Non-sterilized scaffold, Group I:scaffold sterilized with 70% Alcohol, Group II: scaffold sterilized with Ethylene Oxide at $65^{\circ}C$, and Group III: scaffold sterilized with Ethylene Oxide at $37^{\circ}C$. To investigate viability of the PC12 cell on the scaffold, The study group and control group in respective were; Control: sterilized with 70% Alcohol, Group I: sterilized with Ethylene Oxide at $65^{\circ}C$, and Group II: sterilized with Ethylene Oxide at $37^{\circ}C$. Results : 1. The surface morphology was slightly changed in Group I, II and Group III, compared with control. 2. The attachment of PC12 cells in Group I, II was not higher than in control Discussion : The attachment of PC12 cell is not influenced by different sterilization methods.

• Journal of Microbiology and Biotechnology
• /
• 제7권4호
• /
• pp.229-236
• /
• 1997

A gene, $phbC_{2.4.1}$ encoding poly-3-hydroxybutyric acid (PHB) synthase of Rhodobacter sphaeroides 2.4.1 was cloned by employing heterologous expression in Escherichia coli. R. sphaeroides chromosomal DNA partially digested with MboI was cloned in pUC19 followed by mobilization into E. coli harbouring $phbA,B_{AC}$ in pRK415, which code for ${\beta}$-ketothiolase and acetoacetyl CoA reductase of Alcaligenes eutrophus, respectively. Two E. coli clones carrying R. sphaeroides chromosomal fragment of $phbC_{2.4.1}$ in pUC19 were selected from ca. 10,000 colonies. The PHB-producing colonies had an opaque white appearance due to the intracellular accumulation of PHB. The structure of PHB produced by the recombinant E. coli as well as from R. sphaeroides 2.4.1 was confirmed by [$H^{+}$]-nuclear magnetic resonance (NMR) spectroscopy. Restriction analysis of the two pUC19 clones revealed that one insert DNA fragment is contained as a part of the other cloned fragment. An open reading frame of 601 amino acids of $phbC_{2.4.1}$ with approximate M.W. of 66 kDa was found from nucleotide sequence determination of the 2.8-kb SaiI-PstI restriction endonuclease fragment which had been narrowed down to support PHB synthesis through heterologous expression in the E. coli harbouring $phbA,B_{AC}$. The promoter (s) of the $phbC_{2.4.1}$ were localized within a 340-bp DNA region upstream of the $phbC_{2.4.1}$ start codon according to heterologous expression analysis.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.297-302
• /
• 2008

To direct the evolution of nanostructure and immobilize ${\gamma}-Al_2O_3$ catalyst, nanocrystalline La-doped-$Al_2O_3$ powder were prepared by the sol-gel process with addition of an amphiphilic block copolymer template (pluronic P123: $(poly(ethyleneoxide)_{20}-poly(propyleneoxide)_{70}-poly(ethyleneoxide)_{20})$. The dried gel is amorphous, whereas heating at temperature above $700^{\circ}C$ leads to the formation of nanocrystalline ${\gamma}$ and ${\delta}-Al_2O_3$ and these two phases is kept until $1100^{\circ}C$. ${\alpha}-A1_2O_3 $starts to form at $1200^{\circ}C$ with $LaAl_{11}O_{18}$. The surface morphology and crystal structure has been observed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). Solid state $^{27}Al$ MAS NMR indicates two types of local environment, i.e. octahedral and tetrahedral sites. The surface area and pore size was compared among these powders using the BET nitrogen adsorption measurements.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.188-194
• /
• 2003

Phase behavior and spinodal phase separation kinetics in binary blends of a random copolymer of vinylidene fluoride and trifluoroethylene (75/25) [P(VDF/TrFE)] and poly(l,4-butylene adipate) (PBA) have been investigated by means of optical microscopic observation and time-resolved light scattering. The blends exhibited a typical lower critical solution temperature (LCST)∼${34}^{\circ}C$ above the melting temperature of the P(VDF/TrFE) crystals over the entire blend composition range. P(VDF/TrFE) and PBA were totally miscible in the temperature gap between the melting point of P(VDF/TrFE) and the LCST. Temperature jump experiments of the 3/7 P(VDF/TrFE)/PBA blend were carried out on a light-scattering apparatus from a single-phase melt state (${180}^{\circ}C$) to a two-phase region (205∼${215}^{\circ}C$). Since the late stage of spinodal decomposition (SD) is prevalent in the 3/7 blend, SD was analyzed using a power law scheme. Self-similarity was preserved well in the late stage of SD in the 3/7 blend.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.1-10
• /
• 2001

Polycrystalline silicon(poly-Si) films are deposited on low temperature glass substrate by Hot-CVD(HWCVD). The structural properties of the poly-Si films are strongly dependent on the temperature$(T_w)$. The films deposited at high $T_w$ of $2000^{\circ}C$ have superior crystalline proper average lateral grain sizes are larger than $1{\mu}m$ and there are no vertical grain boundaries. The sur of the high $T_w$ samples are naturally textured like pyramid shape. These large grain size and text surface are believed to give high current density when applied to solar cells. However, the poly films are structurally porous and contains high defect density, by which high concentration of C and O resulted within the films by air-penetration after removed from chamber.

• Molecules and Cells
• /
• 제27권1호
• /
• pp.47-54
• /
• 2009

A cDNA clone for a transcript preferentially expressed during an early phase of flooding was isolated from Nicotiana tabacum. Nucleotide sequencing of the cDNA clone identified an open reading frame that has high homology to the previously reported glycine-rich RNA-binding proteins. The open reading frame consists of 157 amino acids with an N-terminal RNA-recognition motif and a C-terminal glycine-rich domain, and thus the cDNA clone was designated as Nicotiana tabaccum glycine-rich RNA-binding protein-1 (NtGRP1). Expression of NtGRP1 was upregulated under flooding stress and also increased, but at much lower levels, under conditions of cold, drought, heat, high salt content, and abscisic acid treatment. RNA homopolymer-binding assay showed that NtGRP1 binds to all the RNA homopolymers tested with a higher affinity to poly r(G) and poly r(A) than to poly r(U) and poly r(C). Nucleic acid-binding assays showed that NtGRP1 binds to ssDNA, dsDNA, and mRNA. NtGRP1 suppressed expression of the fire luciferase gene in vitro, and the suppression of luciferase gene expression could be rescued by addition of oligonucleotides. Collectively, the data suggest NtGRP1 as a negative modulator of gene expression by binding to DNA or RNA in bulk that could be advantageous for plants in a stress condition like flooding.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.995-998
• /
• 2003

This paper presents the deposition of poly-Si thin-film and fabrication of a solar cell by VHF-PECVD method. The poly-Si thin films. and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from poly-Si thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, solar cell characteristic was measured under AM1.5 illumination.

• Journal of Microbiology
• /
• 제40권2호
• /
• pp.129-133
• /
• 2002

The fungus, Emericellopsis minima W2, capable of degrading poly(3-hydroxybutyrate) (PHB) was isolated from a waste water sample. Production of the PHB depolymerase from E. minima W2 (PhaZ/ sub Emi/) was significantly repressed in the presence of glucose. PhaZ/ sub Emi/ was purified by column chromatography on Octyl-Sepharose CL-4B and Sephadex G-100. The molecular mass of the PhaZ/ sub Emi/), which consisted of a single polypeptide chain, was estimated to be 48.0 kDa by SDS-PAGE and its pI vague was 4.4. The maximum activity of the PhaZ/ sub Emi/ was observed at pH 9.0 and 55$\^{C}$. It was significantly inactivated by 1mM dithiothreitol, 2mM diisopropyl fluorphosphate, 0.1mM Tween 80, and 0.1 mM Triton X-l00, but insensitive to phenylmethylsulfonyl fluoride and N-ethylmaleimide. The PhaZ/ sub Emi/ efficiently hydrolyzed PHB and its copolyester with 30 mol% 3-hydroxyvalerate, but did not act on poly(3-hydroxyoctanoate). It also hydrolyzed p-nitrophenylacetate and p-nitrophenylbutyrate but hardly affected the longer-chain forms. The main hydrolysis product of PHB was identified as a dimer of 3-hydroxybutyrate.