• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2234-2236
• /
• 2002

In this paper, realized an automation system that applies the automobile electromotive mirror using CAN(Controller Area Network : ISO l1898). CAN is being used mainly in ECUs (Electronic Control Units) connection of control system or automobile inside. And it has high reliability in the various network protocol. To be realized position system, Automobile Electro mirror, has a strong point that estabilishment e decrease and ease of maintenance it compare PPP(Point-to-point) method of existed. The realization composed of three portions. One Input Slave Con which accept a user's input, another Output Slave Co which drove it makes the motor of electromotive mirr other Master Controller which interfacing the two Controller. Automobile electromotive mirror realized time system that will be able to minize the delay t point of time user's input until output point of time mirror.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2135-2148
• /
• 2000

Developing network software in embedded systems, such as digital set-top boxes, requires coding under limited computing resources. This paper presents the porting of Point-to-point Protocol (PPP) software, PPPD, to an embedded system. The PPP is the most popular link layer protocol for the information appliance, to an embedded system. In order to achieve this, problems to be solved for the porting were identified and methods to solve the problems were described. First, PPP source codes were divided into modules. Next, functions of each module were analyzed and interfaces between the modules were delineated. With the analysis results, porting to the embedded system was described. The normal operation of the ported software was verified with the help of a network packet analyzer. Finally, experiences during the porting were presented. The method developed in th paper can be applied to the porting of software to an embedded system as well as the porting of network software.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.235-241
• /
• 2000

This article suggests integrated neural network models for the interest rate forecasting using change point detection. The basic concept of proposed model is to obtain intervals divided by change point, to identify them as change-point groups, and to involve them in interest rate forecasting. the proposed models consist of three stages. The first stage is to detect successive change points in interest rate dataset. The second stage is to forecast change-point group with data mining classifiers. The final stage is to forecast the desired output with BPN. Based on this structure, we propose three integrated neural network models in terms of data mining classifier: (1) multivariate discriminant analysis (MDA)-supported neural network model, (2) case based reasoning (CBR)-supported neural network model and (3) backpropagation neural networks (BPN)-supported neural network model. Subsequently, we compare these models with a neural networks (BPN)-supported neural network model. Subsequently, we compare these models with a neural network model alone and, in addition, determine which of three classifiers (MDA, CBR and BPN) can perform better. This article is then to examine the predictability of integrated neural network models for interest rate forecasting using change-point detection.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.638-643
• /
• 2004

Middleware enables different networking devices and protocols to inter-operate in ubiquitous home network environments. The UPnP(Universal Plug and Play) middleware, which runs on a PC and is based on the IPv4 protocol, has attracted much interest in the field of home network research since it has versatility The UPnP, however, cannot be easily accessed via the public Internet since the UPnP devices that provide services and the Control Points that control the devices are configured with non-routable local private or Auto IP networks. The critical question is how to access UPnP network via the public Internet. The purpose of this paper is to deal with the non-routability problem in local private and Auto IP networks by improving the conventional Control Point used in UPnP middleware-based home networks. For this purpose, this paper proposes an improved Control Point for accessing and controlling the home network from remote sites via the public Internet, by adding a web server to the conventional Control Point. The improved Control Point is implemented in an embedded GNU/Linux system running on an ARM9 platform. Also this paper implements the security of the home network system based on the UPnP (Universal Plug and Play), adding VPN (Virtual Private Network) router that uses the IPsec to the home network system which is consisted of the ARM9 and the Embedded Linux.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.75-77
• /
• 1994

This paper presents a method of obtaining transmission network equivalents from the network's driving-point admittance characteristic. Proposed method is based on modal decomposition representation for the large-scale interconnected system. As a result, Norton-type of discrete-time filter model can be generated. It can reproduce the driving-point admittance characteristic of the network. Furthermore proposed model can be implemented into the EMTP in a direct manner. The simulation results with the full system representation and the developed equivalent system showed a good agreement.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.299-310
• /
• 2002

This paper describes an integrated network management framework for providing point-to-multipoint reservation service (PMRS) in an ATM network. There are two major issues confronting the network service provider in relation to this service: one is to rapidly confirm the acceptability of the subscriber's reservation at subscription time, and the other is to punctually activate the reserved point-to-multipoint service. To meet these requirements, we developed a service provision model (SPM) and a network resource model of a bandwidth allocation timetable (BATT). We propose a point-to-multipoint routing algorithm composed of ordering and backtracking procedures, which can find the best branch point under the complex network topology and can add more destinations to the existing point-to-multipoint route. We demonstrate the feasibility of the SPM, the BATT, and the point-to-multipoint routing algorithm by implementing our schemes and analyzing their performance under the operational ATM network of KT(Korea Telecom).

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.354-356
• /
• 2006

In this paper, the position control performance of networked control systems is analyzed when time delay through the network is considered. Integrating a control system into a network has great advantages over the traditional control system which uses point to point connection: it allows remarkable reduction in wiring, makes it easy to install and maintain the system, and improves compability. However, a networked control system has the critical defect that network uncertainties, such as time delay, can degrade the control system's performance. Therefore, the major concern of a networked control system is analyzing the effect of network uncertainties. This paper is concerned with PID controller performance for stability region, critical stability region and unstability region under the time delay in the Controller Area Network.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.109-114
• /
• 2004

Increasing popularity of WLAN and advancement of WPAN allow user to connect to the Internet easily today. The increasing of number of networking mobile device such as laptop and PDA requires computing devices to share high speed Internet line or work on networks in most cases. This has stimulated the demand of access point that supports multiple network interfaces. This paper describes the process of design, implementation and test of the wired/wireless integrated access point that supports multiple network interfaces such as wired LAN, wireless LAN, Bluetooth, and Broadband network. We designed and developed the hardware system and protocol software to integrate heterogeneous network. The system has shown compatibility with standard specification and good performance through testing with various network devices.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.428-435
• /
• 2024

In this paper, a human activity regeneration (HAR) system based on multiple input multiple output frequency modulation continuous wave (MIMO FMCW) radar was designed and implemented. Using point cloud data from MIMO radar sensors has advantages in terms of privacy, safety, and accuracy. For the implementation of the HAR system, a customized neural network based on PointPillars and depthwise separate convolutional neural network (DS-CNN) was developed. By processing high-resolution point cloud data through a lightweight network, high accuracy and efficiency were achieved. As a result, the accuracy of 98.27% and the computational complexity of 11.27M multiply-accumulates (Macs) were achieved. In addition, the developed neural network model was implemented on Raspberry-Pi embedded system and it was confirmed that point cloud data can be processed at a speed of up to 8 fps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1601-1607
• /
• 1999

LMDS(Local Multipoint Distribution Service) is a broadband wireless transmission system in millimeter wave frequency. LMDS system is consisted with relay system to connect between head-end and hub and distribution system to connect between hub and subscribers. In this study, we develop point-to-point relay system to use back-bone system n LMDS network. We develop STM-1 transceiver over 27GHz and analyze the system performance. We can get the similar measurement results comparing the theoretical results and then prove that this system can fit LMDS back-bone network requirement. This is the first system in Korea and we expect this system can apply the various network.