• 제목/요약/키워드: point distribution pattern

검색결과 214건 처리시간 0.024초

다단계분배시스템에서의 동적 발주계획 수립방안 (A Dynamic Inventory Scheduling Method in Multi-Echelon Distribution Systems)

  • 유영준;이종배
    • 산업공학
    • /
    • 제11권2호
    • /
    • pp.13-24
    • /
    • 1998
  • A distribution system is composed of multiple levels from a producer to customers, and it's objective is to supply customers with goods timely with a prescribed level of quality at a minimum cost. For the installation and operation of multi-echelon distribution system, DRP(Distribution Resource Planning) is widely used. However, because of the characteristic difference of material flow dynamic of each distribution center, it is almost impossible to get the optimal distribution scheduling. In this paper, an improved DRP method to schedule multi-echelon distribution network is proposed so that the lot-size and order point is dynamically obtained to meet the change of demand rate and timing. The experiment is done with various demand pattern, forecast errors of demand and lead times of central distribution center. The proposed method is compared with traditional statistical approach.

  • PDF

HEC-HMS 모델을 이용한 산지 소하천유역의 홍수유출량 산정 (Flood Runoff Computation for Mountainous Small Basins using HEC-HMS Model)

  • 장인수
    • 한국산업융합학회 논문집
    • /
    • 제7권3호
    • /
    • pp.281-288
    • /
    • 2004
  • The objective of this study is to propose a methodology of the flood runoff analysis in steep mountainous basins and the analysis basin is the Jasa valley basin in Chungju city Analyzing the spatial pattern of the rainfall in 1994. 6 30~7.1, the seasonal rainy front was tied up in the whole central district, and the rainfall center was moving from the northern Chungbuk province to the northern Kyongbuk province and caused heavy storm. Analyzing the temporal pattern with the Huff method, the 52.5% of the rainfall was concentrated on the 3rd quartile. Rainfall frequency analysis is accomplished by five distribution types; 2-parameter Lognomal, 3-parameter Lognomal, Pearson Type III, Log-Pearson Type III and Extremal Type I distribution Rainfall-runoff analysis in Jasa valley basin was made using HEC-HMS model. Jasa valley basin was divided into 3 sub-basins and the analysis point was 3 points{A, B and C point) With the rainfall data measured by the 10 minutes, the flood runoff also was calculated by as many minutes. SCS CN model, Clark UH model and Muskingum routing model in HEC-HMS model were used to simulate the runoff volume using selected rainfall event.

  • PDF

Selection of Spatial Regression Model Using Point Pattern Analysis

  • Shin, Hyun Su;Lee, Sang-Kyeong;Lee, Byoungkil
    • 한국측량학회지
    • /
    • 제32권3호
    • /
    • pp.225-231
    • /
    • 2014
  • When a spatial regression model that uses kernel density values as a dependent variable is applied to retail business data, a unique model cannot be selected because kernel density values change following kernel bandwidths. To overcome this problem, this paper suggests how to use the point pattern analysis, especially the L-index to select a unique spatial regression model. In this study, kernel density values of retail business are computed by the bandwidth, the distance of the maximum L-index and used as the dependent variable of spatial regression model. To test this procedure, we apply it to meeting room business data in Seoul, Korea. As a result, a spatial error model (SEM) is selected between two popular spatial regression models, a spatial lag model and a spatial error model. Also, a unique SEM based on the real distribution of retail business is selected. We confirm that there is a trade-off between the goodness of fit of the SEM and the real distribution of meeting room business over the bandwidth of maximum L-index.

오대산지진(M=4.8, '07. 1. 20)의 지진파 전달특성 평가 (Spectral Features of Seismic Wave Propagation from Odaesan Earthquake (M=4.8, '07. 1. 20))

  • 연관희;박동희;장천중
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.81-86
    • /
    • 2007
  • Spectral features of the seismic wave propagation from Odaesan Earthquake were evaluated based on the commonly treated random error between the observed data and the prediction values by the stochastic point-source ground-motion spectral model regarding the source, path and site effects. Radiation pattern of the error according to azimuth angle was found to be similar to the theoretical estimate. It was also observed that the spatial distribution of the errors was correlated with the geological map and the Q0 map which are indicatives of seismic boundaries.

  • PDF

레이블링 방법을 이용한 지문 영상의 기준점 검출 (Core Point Detection Using Labeling Method in Fingerprint)

  • 송영철;박철현;박길흠
    • 한국통신학회논문지
    • /
    • 제28권9C호
    • /
    • pp.860-867
    • /
    • 2003
  • 본 논문에서는 방향 패턴 레이블링을 이용하여 지문 영상의 중심점을 검출하는 방법을 제안하였다. 중심점은 지문영상에서의 특이점들 중의 하나이며 대부분의 지문 인식 시스템에서 기준점으로 사용되고 있다. 중심점의 검출은 지문 인식 시스템에서 반드시 수행되어야할 중요한 단계로 전체 시스템의 성능에 큰 영향을 준다. 제안된 방법에서는 ridge의 분포로부터 얻어낸 방향 성분에 레이블링 방법과 중심점의 위치를 결정하는 알고리즘을 적용하여 중심점의 위치를 검출할 수 있었다. 모의 실험 결과 제안한 방법이 Poincare index와 Sine map 방법들에 비해 수행시간과 검출률 모두에서 좀더 나은 성능을 보임을 확인하였다. 특히 제안한 방법은 arch 형의 중심점 검출에 있어 Poincare index 방법의 낮은 검출률과 Sine map 방법의 긴 수행 시간이라는 단점들을 모두 극복하였다.

크로스 패턴과 납작한 육각 탐색패턴을 이용한 고속 블록 정합 알고리즘 (A Fast Block Matching Algorithm by using the Cross Pattern and Flat-Hexagonal Search Pattern)

  • 남현우;김종경
    • 한국컴퓨터산업학회논문지
    • /
    • 제4권12호
    • /
    • pp.953-964
    • /
    • 2003
  • 서로 다른 형태와 크기를 가지는 탐색패턴과 움직임 벡터의 분포는 블록 정합 알고리즘에서 탐색 속도와 화질을 좌우하는 중요한 요소이다. 본 논문에서는 크로스패턴과 납작한 육각패턴을 이용한 새로운 고속 블록 정합 알고리즘을 제안한다. 이 알고리즘은 초기에 크로스 패턴을 이용하여 탐색영역의 중심 주위에 분포 확률이 높은 움직임이 작은 벡터를 우선 찾은 다음에 움직임이 큰 벡터에 대해서는 납작한 육각패턴을 이용하여 고속으로 움직임 벡터를 찾게 하였다. 실험결과, 제안된 알고리즘은 육각패턴 탐색 알고리즘에 비하여 움직임 벡터 추정의 속도에 있어서 약 0.2-6.2% 의 성능 향상을 보였으며 화질 또한 PSNR 기준으로 약 0.02-0.3105 의 향상을 보였다.

  • PDF

계층적 구조를 가진 퍼지 패턴 분류기 설계 (A Design of Fuzzy Classifier with Hierarchical Structure)

  • 안태천;노석범;김용수
    • 한국지능시스템학회논문지
    • /
    • 제24권4호
    • /
    • pp.355-359
    • /
    • 2014
  • 본 논문은 단순한 후반부 구조를 가진 퍼지 모델을 계층적 구조로 결합한 퍼지 패턴 분류기를 제안한다. 계층적 구조를 가진 퍼지 패턴 분류기의 기본 구조는 단순한 후반부 구조를 가진 퍼지 모델을 사용하여 전체 패턴 분류기의 구조적 복잡성을 높이지 않도록 설계 하였다. 입력공간을 계층적으로 분할하기 위하여 대표적인 퍼지 클러스터링 알고리즘인 Fuzzy C-Means clustering 기법을 이용하였다. 분할된 퍼지 입력 공간의 하위 구조를 분석하기 위하여 conditional Fuzzy C-Means 클러스터링 기법을 이용하였다. 계층적으로 분할된 퍼지 입력공간에 간단한 구조를 가진 퍼지 패턴 분류기를 적용하여 계층적 구조를 가진 패턴 분류기를 설계한다. 계층적으로 퍼지 모델들을 결합함으로써 입력 공간의 정보 분석을 거시적인 관점에서 시작하여 세부적으로 분석이 가능하게 되었다. 제안된 퍼지 패턴 분류기의 성능을 평가하기 위하여 다양한 기계 학습 데이터를 사용하였다.

경유 혼입에 의한 엔진오일 물성 변화 (Change in Physical Properties of Engine oil Contaminated with Diesel)

  • 임영관;이종은;나용규;김종렬;하종한
    • Tribology and Lubricants
    • /
    • 제33권2호
    • /
    • pp.45-51
    • /
    • 2017
  • Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

사면해석을 위한 최적의 절리군 대표방향성 도출 및 활용기법 연구 (A Study for the Optimum Joint Set Orientations and Its Application to Slope Analysis)

  • 조태진
    • 터널과지하공간
    • /
    • 제28권4호
    • /
    • pp.343-357
    • /
    • 2018
  • 절리군 대표방향성에만 의존하는 기존의 평사투영 사면해석의 불확실성을 극복하고 해석결과의 신뢰성을 증진시키기 위하여 확률통계학적으로 도출된 절리극점들의 dense point 및 절리군 대표방향성과 암반구조 분석결과를 종합적으로 고려하여 사면거동양상을 분석하는 알고리즘을 고안하였다. 이를 위하여 절리극점들의 분포양상에 의거하여 절리확산지수를 산정하는 기법을 고안하였으며, 콘각에 따라 상이하게 도출되는 절리확산지수 및 절리군 수효와 방향성을 종합적으로 고려하여 사면해석에 사용될 대표방향성을 추출하였다. 이들 대표방향성을 평사투영분석에 활용하여 신뢰성이 증진된 사면해석을 수행할 수 있었다. 또한 평면파괴가 우려되는 사면에 대해 한계평형이론에 의거하여 민감도 해석을 수행하고, 사면 안정성에 대한 절리강도 및 외부하중 변화의 영향을 심도 있게 분석하였다.

Triangle Simplification에 의한 3D 인체형상분할과 삼각조합방법에 의한 2D 패턴구성 (Method of 3D Body Surface Segmentation and 2D Pattern Development Using Triangle Simplification and Triangle Patch Arrangement)

  • 정연희;홍경희;김시조
    • 한국의류학회지
    • /
    • 제29권9_10호
    • /
    • pp.1359-1368
    • /
    • 2005
  • When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.