• 제목/요약/키워드: point bar

검색결과 436건 처리시간 0.025초

육미지황탕(六味地黃湯)및 팔미지황탕(八味地黃湯)의 약침(藥鍼)이 신장기능(腎臟機能)에 미치는 영향(影響) (Effects of Aqua-Acupuncture of Yukmijihwangtang and Palmijihwangtang Water Extracts on the Renal Function)

  • 이문호;손인철
    • Journal of Acupuncture Research
    • /
    • 제15권2호
    • /
    • pp.255-277
    • /
    • 1998
  • The aim of this experiment was to investigate the effects of Aqua-Acupuncture of Yukmijiwangtang(六味地黃湯) and Palmijihwang-tang(八味地黃湯) water extracts applied at the meridian points BL 23(賢兪) and GV 4(命門) to test the renal function in normal rats. The results obtained were as follows; 1. Among the effects of Aqua-Acupuncture of Yukmijihwangtang water extract at the merdian point BL 23 group, there were significant changes in water balance and urine volume over a 1 week period; Both decreasing and decreasing trends were exihibited. Urinary excretion of sodium and free water clearance changed significantly over a 2 week period; Both decreasing and increasing trends were exihibited, Urinary excretion of potassium, chloride and creatinine, plasma renin activity, plasma levels of aldosterone and atrial natriuretic peptide showed no significant differences compared to the contral group. 2. Among the effects of Aqua-Acupuncture of Palmljihwangtang water extract at the merdian point BL 23 group, there were significant changes in water balance and free water clearance over a 2 week period; a decreasing trend. Urinary excretion of creatinine changed significantly over a 2 week period; an increasing trend. Urinary excretion of chloride changed significantly over 1 week period; an increasing trend. The plasma levels of atrial natriuretic peptide changed significantly over 1 and 2 week period; an increasing trend. Urine volume, urinary excretion of sodium and pottasium, plasma renin activity and plasma level of aldosterone showed no significant differences compared to the control group. 3. Among the effects of Aqua-Acupuncture of Yukmijihwangtang water extract at the meridian point GV 4 group, there was significant decrease in water balance over a 2 week period; there was significant decrease in urine volwne and urinary excretion of sodium and creatinine over a 1 week period, followed by an increasing trend after 2 weeks. Urinary excretion of free water clearance demonstrated significant changes over both 1 and 2 week period; both increasing and decreasing trends were exihibited. Urinary excretion of chloride and plasma levels of aldosterone increased significantly over 1 and 2 week period. Plasma levels of atrial natriuretic peptide also decreased significantly. Plasma renin activity showed no significant differences compared to the control group. 4. Among the effects of Aqua-Acupuncture of Palmijihwangtang water extract at the meridian point GV 4 group, water balance and urinary excretion of chloride, plasma levels of aldosterone decreased significantly over both 1 and 2 week period. Urine volume and urinary excretion of pottasium decreased significantly. Urinary excretion of creatinine and urinary excretion of sodium changed significantly over both 1 and 2 week period. Urinary excretion of free water clearance, plasma renin activity and plasma level of atrial natriuretic peptide showed no significant differences compared to the control group. Seeing these results, I come to know that the effects Aqua-Acupuncture of Yukmijihwangtang and Palmijihwangtang water extracts at the meridian point BL 23 and GV 4 have affected the renal function differently. Seeing the results that BL 23 is a meridian point for Aqua-Acupuncture directly related to the kidney, I think, we can use Aqua-Acupuncture of Yuk-mijihwangtang and Palmijihwangtang water extracts to prevent and to treat the diseases related to kidney.

  • PDF

하천합류부에서 갈대매트를 이용한 하천식생대 조성에 대한 기초적 연구 (A Fundamental Study on the Effect to Build up a Vegetation Strip at Stream Confluence by Using Reed Mat)

  • 정경진;김미경;안원용
    • 한국환경복원기술학회지
    • /
    • 제6권4호
    • /
    • pp.62-73
    • /
    • 2003
  • The study was to apply a mat style reed planting method at confluence to improve plants growth conditions by relaxing disturbed topographical base due to water flow and was intended to review the effect to build up a vegetation strip by monitoring process after the construction. First off, We've attempted to construct reed mats on selected sites as confluences of Tan and Gaehwa stream and then examined and analyzed characteristics of soil and vegetation community. As the results of the examination, the soil texture was proven to be a mix of sand and loamy sand and be 6.3 ~ 7.0 soil pH. In addition, it contained 1.0 ~ 4.6% of organic matter, 0.04 ~ 0.22% of T-N and 27.8 ~ 41.2% of water content. For its vegetation structure, the Tan stream confluence was first actually a point bar without plants prior to the construction but 8 kinds of hygrophytes including Persicaria hydropiper and 9 kinds of terrestrial plants such as Potentilla supina, Artemisia annua, and Alopecurus aequalis var. amurensis. On the other hand, the Gaehwa stream confluence contained 6 kinds of hygrophytes such as Bidens frondosa and other 11 kinds of terrestrial plants prior to the construction while it produced 7 kinds of hygrophytes including Ranunculus ternatus as well as Phragmites australis and 9 kinds of terrestrial plants such as Potentilla supina after the construction. For the Phragmites australis, almost of them was weathered away in early days just after planting because of development period passed, but on May, six months later from planting, it was investigated that its length was approximated as 65 ~ 85cm with 75% coverage and that the number of it was 437 ~ 633/$m^2$. The study was shown that reed mats can improve environmental conditions of disturbed topographical base, enabling natural growth of various riparian vegetation including the introduced plant, reed. In the meantime, it was supposedly judged that to recover or build up a vegetarian strip, supplementary materials should be prepared to help produce and grow plants because it is not probable to expect river drift by water flow at confluence and that corrosion, burying or inundation owing to changes of water lever should be considered.

3-Dimensional Performance Optimization Model of Snatch Weightlifting

  • Moon, Young-Jin;Darren, Stefanyshyn
    • 한국운동역학회지
    • /
    • 제25권2호
    • /
    • pp.157-165
    • /
    • 2015
  • Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

프리캐스트 콘크리트 트리플 리브 슬래브의 전단성능 (Shear Capacity of Precast Concrete Triple Ribs Slab)

  • 황승범;서수연;이강철;이석현
    • 콘크리트학회논문집
    • /
    • 제28권4호
    • /
    • pp.489-496
    • /
    • 2016
  • 최근, 건물의 자중을 저감시킴으로서 시공성을 향상시키기 위한 방안으로 중공 PC슬래브에 대한 관심이 높아지고 있다. 국내에서 생산되는 대표적인 중공 PC슬래브인 HCS는 생산방식 특성상 전단보강근의 배근이 어렵기 때문에 안전성 및 사용성 측면에서 문제가 제기되고 있다. 이와 같은 측면에서, 최근 새로운 형태의 부분 PC 슬래브 시스템인 Tripple Ribs Slab (TRS)가 개발되었다. TRS는 전단보강근의 배근이 가능한 하프PC형 중공슬래브이다. 본 연구에서는 TRS의 전단성능을 검토하기 위해 전단실험을 진행하였다. 시공단계별로 형성되는 단면조건에 대하여 비대칭 1점 가력으로 실험하였으며 실험결과 강도를 기준 식들과 비교하였다. 실험에서의 변수는 CIP 유무와 래티스바의 유무 또는 래티스바의 종류이다. 실험으로부터, TRS는 설계하중을 충분히 지지할 수 있는 전단성능을 가지고 있으며 실험체의 강도는 국내콘크리트구조기준에서 제시하는 일반식으로 적절하게 예측될 수 있는 것으로 나타났다. CIP가 타설되지 않은 시공단계에서는 래티스바의 기여도가 현저히 낮기 때문에 래티스바의 전단강도를 제외하고 설계하는 것이 바람직하다고 판단된다.

앵글과 철근을 조립한 PSRC 합성기둥의 휨 실험 (Flexural Test for Prefabricated Composite Columns Using Steel Angle and Reinforcing Bar)

  • 엄태성;황현종;박홍근;이창남;김형섭
    • 한국강구조학회 논문집
    • /
    • 제24권5호
    • /
    • pp.535-547
    • /
    • 2012
  • PSRC 기둥은 앵글을 콘크리트에 매입시킨 기둥으로, 단면의 외곽 코너에 배치되는 앵글이 기둥의 휨-압축에 저항하고, 횡철근은 기둥의 전단과 앵글-콘크리트 사이의 부착에 저항한다. 본 연구에서는 KBC 2009에 따라 PSRC 합성기둥의 휨, 전단, 부착 설계방법을 정립하고, 단순지지된 2/3 스케일의 PSRC 보와 SRC 보의 2점 가력 휨실험을 통하여 제안된 설계법을 검증하고 PSRC 합성기둥의 파괴특성을 분석하였다. 단면의 강재비와 횡철근 간격을 실험 변수로 고려하였다. 실험결과, KBC 2009으로 예측한 PSRC 합성기둥의 휨, 전단, 부착 강도는 실험결과와 잘 일치하였다. 고강도 앵글이 기둥 단면의 외곽에 배치되므로 PSRC 합성기둥은 동일한 강재비를 갖는 일반 SRC 합성기둥 단면에 비하여 매우 우수한 휨저항 성능을 나타냈다. 그러나 앵글과 콘크리트 사이의 부착강도가 충분히 학보되지 못한 경우 합성기둥 단면의 휨항복강도를 발휘하기 이전에 앵글의 부착파괴, 피복콘크리트 파괴, 횡철근의 파단 등이 발생하였다. 또한 앵글 용접성 및 인성이 부족할 경우 앵글-횡철근 용접부에서 앵글의 파단에 의해 실험체가 파괴되었다.

고강도 철근을 사용한 철근콘크리트 패널의 비선형 유한요소해석 (Nonlinear Finite Element Analysis of the Reinforced Concrete Panel using High-Strength Reinforcing Bar)

  • 천주현;성대정;조홍재;조재열;신현목
    • 콘크리트학회논문집
    • /
    • 제27권5호
    • /
    • pp.481-488
    • /
    • 2015
  • 이 연구에서는 고강도 철근이 사용된 철근콘크리트 패널 실험체의 파괴에 이르기까지의 전반적인 거동특성을 합리적으로 예측하기위한 해석적 방안을 마련하는 것을 목표로 한다. 다양한 하중 조건과 설계 변수하에서 실제 격납구조물 벽체 두께의 1/3 규모를 갖는 총 12개의 철근콘크리트 패널 실험체를 검증 대상으로 선정하여 저자 등에 의해 개발된 비선형 유한요소해석 프로그램(RCAHEST)을 적용하여 해석을 수행하였다. 균열 발생 시점에서의 전단 강도와 최대 전단 강도에 대한 실험과 해석으로부터의 평균과 변동계수는 각각 1.03과 12% 및 0.97과 9%정도로 예측되었다. 최대 전단 강도에서의 전단 변형률에 대한 실험과 해석으로부터의 결과는 평균과 변동계수가 각각 0.96과 30% 정도로 예측되었다. 결과를 종합해 볼 때, 이 연구에서 새로운 수정한 구성방정식을 적용한 해석프로그램은 그 해석 결과에 비교적 높은 신뢰도를 확보하고 있는 것으로 판단된다.

포토레지스트 공정에서 높은 선택성을 가지는 초임계 이산화탄소/n-butyl acetate 공용매 시스템 연구 (Study of Supercritical Carbon Dioxide/n-Butyl Acetate Co-solvent System with High Selectivity in Photoresist Removal Process)

  • 김동우;허훈;임권택
    • 청정기술
    • /
    • 제23권4호
    • /
    • pp.357-363
    • /
    • 2017
  • 본 연구에서는 초임계 이산화탄소/n-butyl acetate ($scCO_2$/n-BA) 공용매를 사용하여 네거티브형 포토레지스트(PR)를 제거하는 실험을 진행하였다. $scCO_2$와 n-BA의 용해도 평가를 통해 n-BA가 $scCO_2$와 균일하게 섞이는 조건을 실험적으로 측정하였다. 다양한 실험 변수를 조정하여 포토레지스트 제거 실험을 진행하였고, 미노광 포토레지스트 제거에 대한 최적의 조건을 확립하였다. 또한, 노광된 PR과 미노광 PR의 제거율을 비교하여 $scCO_2$/n-BA 공용매의 선택적 제거 성능을 확인하였다. 노광된 PR은 $scCO_2$/n-BA 공용매 환경에서 매우 안정적으로 존재함을 관찰하였고, 미노광 PR은 160 bar, $40^{\circ}C$, 75 wt% n-BA 이상의 농도에서 완전히 제거됨을 확인하였다. $scCO_2$/n-BA 공용매 시스템은 노광 PR과 미노광 PR 사이의 높은 선택성을 제공할 수 있으며, 네거티브 PR의 리소그래피 공정에서 높은 신뢰성을 부여할 것으로 기대된다.

Study on a Suspension of a Planetary Exploration Rover to Improve Driving Performance During Overcoming Obstacles

  • Eom, We-Sub;Kim, Youn-Kyu;Lee, Joo-Hee;Choi, Gi-Hyuk;Sim, Eun-Sup
    • Journal of Astronomy and Space Sciences
    • /
    • 제29권4호
    • /
    • pp.381-387
    • /
    • 2012
  • The planetary exploration rover executes various missions after moving to the target point in an unknown environment in the shortest distance. Such missions include the researches for geological and climatic conditions as well as the existence of water or living creatures. If there is any obstacle on the way, it is detected by such sensors as ultrasonic sensor, infrared light sensor, stereo vision, and laser ranger finder. After the obtained data is transferred to the main controller of the rover, decisions can be made to either overcome or avoid the obstacle on the way based on the operating algorithm of the rover. All the planetary exploration rovers which have been developed until now receive the information of the height or width of the obstacle from such sensors before analyzing it in order to find out whether it is possible to overcome the obstacle or not. If it is decided to be better to overcome the obstacle in terms of the operating safety and the electric consumption of the rover, it is generally made to overcome it. Therefore, for the purpose of carrying out the planetary exploration task, it is necessary to design the proper suspension system of the rover which enables it to safely overcome any obstacle on the way on the surface in any unknown environment. This study focuses on the design of the new double 4-bar linkage type of suspension system applied to the Korea Aerospace Research Institute rover (a tentatively name) that is currently in the process of development by our institute in order to develop the planetary exploration rover which absolutely requires the capacity of overcoming any obstacle. Throughout this study, the negative moment which harms the capacity of the rover for overcoming an obstacle was induced through the dynamical modeling process for the rocker-bogie applied to the Mars exploration rover of the US and the improved version of rocker-bogie as well as the suggested double 4-bar linkage type of suspension system. Also, based on the height of the obstacle, a simulation was carried out for the negative moment of the suspension system before the excellence of the suspension system suggested through the comparison of responding characteristics was proved.

스터럽이 없는 GFRP 보강근 콘크리트 보에 대한 실험적 연구 (Experimental Study for GFRP Reinforced Concrete Beams without Stirrups)

  • 고성현
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권2호
    • /
    • pp.21-29
    • /
    • 2014
  • 본 연구에서는 GFRP 이형 보강근으로 휨보강된 보의 거동, 파괴유형과 강도를 평가하였다. 4개의 보 실험체들을 제작하여 실험을 수행하였다. 4점 하중재하 조건으로 단순지지된 GFRP로 보강 콘크리트 실험체의 거동과 하중-처짐을 관찰하였다. 전단배근으로 인한 거동의 불확실성을 배제하기 위하여 스터럽을 배근하지 않고 실험체를 제작하였다. 실험 변수는 전단지간비와 유효보강비이다. 실험체의 길이는 3,300 또는 $1,950mm{\times}200mm{\times}240mm$이고 순지간 2,900 또는 1,000mm이다. 전단지간비는 6.5와 2.5이며, GFRP 유효 보강근비는 $1.126{\rho}_{fb}$, $2.250{\rho}_{fb}$, $3.375{\rho}_{fb}$$0.634{\rho}_{fb}$이다. 실험 결과 모든 실험체는 전단파괴 되었으며 실험계획에 적용한 ACI 440.1R, CSA S806와 ISIS의 전단 강도식이 실제와 편차가 있음을 확인하였다.

GFRP 보강근으로 겹이음된 콘크리트 보의 보강비에 따른 거동특성 (Behavior of Reinforcement Ratio on Concrete Beams Reinforced with Lab Spliced GFRP Bar)

  • 최윤철;박금성;최현기;최창식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권1호
    • /
    • pp.67-76
    • /
    • 2011
  • 기존의 철근 콘크리트 구조물에서 나타나는, 극한 환경하에서의 철근의 부식 문제 때문에 GFRP 보강근으로 철근을 대체하고 있다. 최근 들어 GFRP를 보강근으로 사용한 보의 성능에 대한 해석적, 실험적 연구가 지속적으로 행해지고 있지만 아직 철근 콘크리트 보의 연구에 대한 수에 비하여 이에 대한 연구 결과는 매우 적어 신뢰성을 얻기 힘든 상황이다. 이에 본 연구에서는 겹침이음된 GFRP 보강근을 보에 적용하여 모멘트-처짐 관계에 대한 실험적 연구를 수행하였다. 실험 변수는 GFRP의 보강비와 피복 두께에 대한 것으로 총 6개의 GFRP 보강 콘크리트 보의 실험체가 제작되었다. 모든 실험체는 4000mm의 스팬을 가지고 있으며 12.7mm의 지름을 가지는 GFRP 보강근을 사용하였다. 보강근이 겹침이음된 부분에 일정한 모멘트가 작용하게 하기 위해 2점 가력 방식을 사용하였다. 실험 결과 보강근비의 증가에 따라 극한 하중의 크기가 증가하였다. 파괴 모드는 보강근비에 따라 매우 민감하게 변화하였으며 피복 두께는 인장측의 콘크리트의 탈락에 의해 최대 강도와 처짐량을 결정하는 요인이 되는 것으로 나타났다.