• 제목/요약/키워드: plate-waste rate

검색결과 35건 처리시간 0.03초

철 샘플에 따른 구리 함유 폐에칭액의 시멘테이션 반응에 대한 연구 (A Study on the Cementation Reaction of Copper-containing Waste Etching Solution to the Shape of Iron Samples)

  • 김보람;장대환;김대원
    • 청정기술
    • /
    • 제27권3호
    • /
    • pp.240-246
    • /
    • 2021
  • COF (Chip on film)용 폐에칭용액 내 구리가 약 3.5% 함유되어 있으며, 철 시편을 사용한 시멘테이션을 통해 구리를 회수하고자 하였다. 철 시편 3종류(플레이트, 칩, 분말)에 따른 시멘테이션 반응에 미치는 영향을 조사하였으며, 구리의 회수율을 높이고자 구리에 대한 철의 몰 비를 변수로 하였다. 반응 전·후 용액 내 시간에 따른 구리 농도의 변화를 확인하였으며, 몰 비를 증가시킬수록 초기 용액 내 구리 함량이 급격히 줄어드는 경향이 나타났다. 상온에서 1시간의 시멘테이션 반응 후 철 시편의 비표면적 값이 큰 플레이트, 칩, 분말 순으로 구리의 회수율이 증가하였다. 회수된 분말은 X선 회절 분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM) 및 에너지 분산형 분광분석법(Energy-dispersive X-ray spectroscopy, EDM) 분석을 통해 결정상과 결정 형태를 확인하였으며, 철 분말의 경우에는 회수된 구리 분말에 미반응된 철 성분이 혼재하였다. 구리에 대한 철의 몰 비 4의 조건으로 철 칩을 사용하였을 때, 구리 회수율 약 98.4%로 최적 조건으로 달성하였다.

201Tl의 생산과정에서 발생한 방사성 폐기물의 제염 효율 평가 (Evaluation of the Decontamination Efficiency of Radioactive Wastes Generated during the Production of 201Tl)

  • 허재승;김상록;김기섭;안윤진;김정민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권5호
    • /
    • pp.481-487
    • /
    • 2021
  • This study was conducted for the purpose of efficient radioactive waste disposal and management. Experiment was evaluated the decontamination efficiencies of the four types decontamination materials(Water, Alcohol, Decontamination Water, Decontamination Gel) with radioactive wastes generated during radio-pharmaceutical production process at Korea Institute Radiological and Medical Sciences(KIRAMS). The radioactive waste sample used in experiment is a lead plate of the fume hood that was disposed in April, 2019. In the experimental method, radioactive waste was measured before and after decontamination using a HPGe semiconductor detector and Gamma survey meter. The measured values before and after decontamination were evaluated for decontamination efficiency as a percentage. As a result, it was confirmed that a lot of specific activity and surface dose rate was removed from the radioactive wastes. In particular, when decontamination water was used, most of the radioactivity of radioactive wastes was removed. Considering these results, if decontamination water is used in decontamination of radioactive waste, decontamination efficiency equivalent to the disposition criteria can be expected with just one decontamination treatment. In addition, in the case of water and alcohol, only on decontamination was effective in approximately 75% and 95%. Otherwise, when decontamination gel was used, it was confirmed that the largest deviation occurred among all experimental results.

확장표면을 적용한 액체식 제습기에서 제습액 분배 특성에 관한 실험적 연구 (Experimental Study on Liquid Desiccant Distribution Characteristics at a Dehumidifier with Extended Surface)

  • 이민수;장영수;이대영
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.645-649
    • /
    • 2009
  • Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

  • PDF

암모니아-물 흡수식 시스템에서 유하액막식 발생기의 해석 (Analysis of Falling-film Generator in Ammonia-water Absorption System)

  • 김병주;손병후;구기갑
    • 설비공학논문집
    • /
    • 제13권5호
    • /
    • pp.422-430
    • /
    • 2001
  • In the present study, an evaporative generation process of ammonia-water solution film on the vertical plate was analysed. For the utilization of waste heat, hot water of low temperature was used as the heat source. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. Counter-current solution-vapor flow resulted in the refrigerant vapor of the higher ammonia concentration than that of co-current flow. Eve the rectification of refrigerant vapor was observed near the inlet of solution film in counter-current flow. For the optimum operation of generator using hot water, numerical experiments, based on the heat exchange and generation efficiencies. revealed the inter-relationships among the Reynolds number of the solution film and hot water, and the length of generator. Enhancement of heat and mass transport in the solution film was found to be very effective for the improvement of generation performance, especially at high solution flow rate.

  • PDF

태양광/자외선/이산화티타늄($TiO_2$)을 이용한 에너지 절약형 광촉매 반응 처리시스템 개발 (Development of Wastewater Treatment System by Energy-Saving Photocatalyst Using Combination of Solar Light, UV Lamp and $TiO_2$)

  • 김현용;양원호
    • 한국환경보건학회지
    • /
    • 제29권1호
    • /
    • pp.51-61
    • /
    • 2003
  • Pollution purification using titanium dioxide (TiO$_2$) photocatalyst has attracted a great deal of attention with increasing number of relent environmental problems. Currently, the application of TiO$_2$ photocatalyst has been focused on purification and treatment of waste water. However. the use of conventional TiO$_2$ powder photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we herein studied the pilot-scale design to aid in optimization of the energy-saving process for more through development and reactor design by solar light/UV lamp/ TiO$_2$system. In this study, we manufactured the TiO$_2$sol by sol-gel method. According to analysis by XRD, SEM and TEM, characterization of TiO$_2$ sol were nano-size (5-6 nm) and anatase type. Inorganic binder (SiO$_2$) was added to TiO$_2$ lot to be coated for support strongly, and support of ceramic bead was used to lower separation rate that of glass bead The influences were studied of various experimental parameters such as TiO$_2$ quantity, pH, flow rate. additives, pollutants concentration, climate condition and reflection plate by means of reaction time of the main chararteristics of the obtained materials. In water treatment system, variable realtor as solar light/ or UV lamp according to climate condition such as sunny and cloudy days treated the phenol and E-coli(Escherichia coli) effectively.

조리 중량 변화 계수 및 잔반계측법을 이용한 노인복지시설 이용자의 점심식사 영양섭취평가 (Assessment of Nutrient Intakes of Lunch Meals for the Aged Customers at the Elderly Care Facilities Through Measuring Cooking Yield Factor and the Weighed Plate Waste)

  • 장혜자;이나영;김태희
    • Journal of Nutrition and Health
    • /
    • 제42권7호
    • /
    • pp.650-663
    • /
    • 2009
  • 본 연구의 목적은 집단 영양평가시 급식시설에서 제공하는 표준레시피의 자료로 단순히 영양분석하여 평가할 경우 1인 배식량과 섭취량이 서로 달라 정확한 영양평가를 할 수 없다는 점을 입증하고 정확한 영양분석을 위한 새로운 접근방법을 제시함과 동시에 노인복지시설에서 제공되는 1끼 식사의 영양 평가를 통해 노인급식 영양관리의 문제점을 파악하고 개선안을 도출하는데 있다. 서울 지역 3개노인복지회관을 선정한 후 표준레시피로 실험조리를 통해 메뉴별 조리중량변화계수를 산출하고, 개별 잔반계측방법으로 실제 제공된 양과 노인들이 섭취한 양을 조사하여 영양평가를 내렸다. 연구결과는 다음과 같다. 1) 조사대상자는 65세 이상 75세 미만이 51명, 75세 이상이 49명이었으며, 평균 신장은 남자 165.6 cm, 여자154.8 cm, 평균 몸무게는 남자 62.9 kg, 여자 57.1 kg이었다. BMI는 정상 체중군에 포함되는 남자는 42.6%, 여자는 43.4%로 나타났고, 남자의 38.3%, 여자의 43.4%가 거동이 불편한 것으로 조사되었다. 2) 단체급식소에서 사용하는 표준레시피의 1인 분량과 배식량간에 차이가 있고, 실제 섭취량과는 더 큰 차이가 있었다. 그러므로 영양평가시 단순히 식단의 표준레시피를 근거로 수행할 경우 실제 섭취량과 다르기 때문에 큰 오차가 발생할 수 있었다. 이를 해결하기 위해 영양사는 실험조리를 통해 표준레시피의 1인 분량과 실제 1인 분량을 동일하게 관리하는 것이 필요하였다. 음식별 조리중량변화계수는 조리방법, 식재료의 특성에 따라 차이가 있지만, 밥 2.4, 육류 찜, 조림, 볶음류 0.6~0.7, 브로컬리초무침 1.25를 보였고, 미역국과 같이 말린 재료를 불려 만든 맑은 국은 12.5, 동태찌개 1.58, 오징어국 2.60으로 나타났다. 따라서 표준레시피에 의거한 1인 분량은 밥류 237~343 g, 국류 284~375 g, 육류 찬 89.4~95.9 g, 야채찬 55~128.7 g, 김치 40 g이었고, 실제 제공하는 평균 배식량은 밥 239.08 g, 국 283.29 g, 육류찬 88.09 g, 야채찬 45.83 g, 김치 38.41 g이며, 노인의 실제 섭취량은 밥 235.97 g, 국 248.53 g, 육류찬 72.8 g, 야채찬 39.8 g, 김치 28.36 g으로 조사되었다. 메뉴군 별로는 밥류 (98.7%)의 섭취율이 가장 높았고, 다음으로 국 (87.7%), 야채찬 (87.0%), 육류찬 (82.7%), 김치 (73.8%) 순의 섭취율을 보였다. 노인들이 섭취하는 양은 밥을 제외하고 급식소 별로 차이가 있는 것으로 나타났다 (p < 0.01). 3) 에너지 및 영양소의 실제 섭취 영양을 일반사항에 따라 비교한 결과, 성별에 따라, 지방, 철, 아연, 리보플라빈의 섭취에 유의적인 차이가 나타났고, 연령에 따라서는 75세 이상의 집단보다 65세 이상 75세 미만의 집단에서 비타민 A와 엽산을 유의적으로 더 많이 섭취하고 있는 것으로 나타났다. BMI에 따라서는 섭취영양에 차이를 보이지 않았으며, 거동 불편여부에 따라서는 단백질, 지방, 칼슘, 인, 나트륨, 비타민 A, 비타민 B6, 나이아신, 비타민 C, 엽산섭취에 유의적인 차이를 보였다. 5) 영양소 적정섭취비율과 질적지수 평가에서 노인급식시설의 점심식사는 철, 칼슘, 리보플라빈이 1 미만으로 낮게 섭취되는 것으로 나타나 개선이 요구되었다. 그러나 단백질 (1.96), 비타민 B6 (1.83), 인 (1.76), 아연 (1.34), 티아민 (1.17), 비타민 C (1.08), 비타민 A (1.06)의 적정 섭취비율은 1 이상으로 나타났다. 그러므로 노인급식을 위한 영양 계획 시 이러한 문제가 되는 영양소들을 공급할 수 있는 식품에 대한 고려가 필요하였다. 또한 복지시설 급식소별로 식사의 질에 대한 평가에 유의적인 차이가 있는 것으로 나타나 노인복지시설에 영양관리 서비스를 제공할 수 있는 영양사의 배치할 수 있도록 정부차원의 지원이 필요하였다. 6) 노인들의 실제 영양섭취 평가 결과, 65세 이상 75세 미만의 집단에서 칼슘을 부족 섭취하는 비율은 남녀 모두 100%였고, 비타민 A는 남자 17.4%, 여자 10.7%, 리보플라빈은 남자 34.8%, 여자 35.7%, 비타민 B6는 남자 4.3%, 여자 14.3%가 부족하게 섭취하고 있는 것으로 조사되었다. 65세 이상 75세 미만의 집단에서 티아민 (10.7%), 나이아신 (7.1%), 비타민 C (10.7%)는 여자에게서만 부족 섭취가 나타났다. 75세 이상의 집단에서는 여자에게서만 단백질이 4.0%부족한 것으로 나타났고, 칼슘은 부족 섭취하는 비율이 남녀 모두 100%였다. 이상의 결과에서 노인 복지시설에 영양사를 배치하여 영양상담과 급식서비스를 원할히 제공함은 물론이고, 보다 정확한 영양평가를 위하여 표준레시피 량과 실제 배식량 간에 차이를 줄일 수 있도록, 실험조리를 통해 표준레시피에 따른 1인 분량 설정과 조리중량변화계수의 산출과 기록관리가 필요하였다. 더 나아가 잔식량 측정을 병행하여 배식량과 섭취량간의 차이를 지속적으로 모니터링하는 노력이 필요하였다. 본 연구에서 채택한 조리변환계수, 잔식률, 섭취율을 이용하여 영양평가 하는 방법은 정확한 영양진단 방법론으로 활용될 수 있으며, 특히 조리중량계수는 조리후 완성된 음식물의 량을 예측하는데 활용될 수 있을 것으로 기대된다.

지반보강재로서 폐타이어의 활용; (1) 지반보강 효과 (Utilization of Waste Tires as Soil Reinforcement; (1) Soil Reinforcing Effect)

  • 윤여원;최경순;윤길림;김방식
    • 한국지반공학회논문집
    • /
    • 제20권3호
    • /
    • pp.107-117
    • /
    • 2004
  • 본 연구에서는 폐타이어를 활용하여 새롭게 고안한 타이어셀 매트의 모래지반 보강효과를 알아보기 위하여 다양한 조건의 평판재하시험을 수행하였다. 계하시험조건은 셀 간의 연결을 위한 볼트 수, 상대밀도, 복토두께, 보강층수, 타이어셀 매트 폭을 변수로 보강효과를 조사하였다. 재하시험 결과 연결용 볼트의 수는 지지력에 큰 영향을 미치지 않는 것으로 나타났으며 1개의 볼트로 주어진 하중을 충분히 견딜 수 있었다. 보강토의 극한지지력과 무보강토의 극한지지력의 비로 정의되는 지지력비(BCR)는 낮은 밀도에서 최대값을 나타내었다. 또한 극한상태에서의 침하감소효과도 낮은 밀도에서 큰 것으로 나타났다. 복토에 따른 보강효과는 복토두께가 1.0B이내에서 보강효과를 얻을 수 있었으나 그 이상에서는 보강효과가 나타나지 않았다. 보강층의 간격이 재하판폭의 0.4내지 0.5배일 경우 보강효과는 보강층이 2층일 때까지는 보강효과가 있으나 3층 이상에서는 효과가 없는 것으로 나타났다. 특히 보강층이 1개층일 때 지지력 증가 효과가 크며 2개층으로 증가함에 따라 증가율은 저하되는 것으로 나타났다. 타이어셀 매트폭이 2.0B에서 최대지지력을 보였으나 매트폭의 영향은 타이어셀의 강성이 크기 때문에 미소하였다. 타이어셀 매트의 지반보강효과는 문헌상의 상업용 지오웹과 비교하여 뛰어난 것으로 나타났다.

직접 접촉식 4단 유동층 열교환기의 압력손실 및 열전달 특성 (The Pressure Drop and Heat Transfer Characteristics of a Direct Contact 4-Stage Fluidized Bed Heat Exchanger)

  • 임동렬;박상일;전광민
    • 대한기계학회논문집
    • /
    • 제16권2호
    • /
    • pp.325-335
    • /
    • 1992
  • In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.

CFD에 의한 선박용 유수분리기의 유동특성에 관한 연구 (A Study on the Flow Characteristics of Oil-Water Separator for Marine Ship CFD)

  • 김병준;김성윤;노춘수;이영호
    • 한국유체기계학회 논문집
    • /
    • 제19권4호
    • /
    • pp.48-53
    • /
    • 2016
  • The centrifugal separator which uses gravity separation method for oil-water separation, rotating at high-speed, is one of the most commonly used device for controlling the amount of the oil in waste water collected in bilge. The IMO (International Maritime Organization) has set regulations, also known as MARPOL 73/78, for the prevention of marine pollution. In addition, DET NORSKE VERITAS (DNV) has set standards regarding the assignment of Environmental Class Notation, CLEAN or CLEAN DESIGN, of ships. One of the requirements for classification is that in addition to conforming to MARPOL 73/78, more stringent measures must be taken as well. One of these measures is to limit the oil concentration in bilge water to less than 5ppm. So in this study, an Oil-Water Separator (OWS) is used together with multiple separating plates as a filtration system to be used as an oil-water separation device. The OWS operates using centrifugal separation in which the mixture is separated by centrifugal forces. The main purpose of this paper is to present the OWS separation efficiency according to the rotation speed, mass-flow rate, the angle and the number of stacked layers of the laminated plate using Computational Fluid Dynamics (CFD). Improvements to the device will be investigated from these results.

폐톱밥 혼입 콘크리트의 단열특성에 관한 실험적 연구 (Insulation Characteristic of Waste Sawdust-mixing Concrete)

  • 홍승렬;조병헌;손기상
    • 한국안전학회지
    • /
    • 제20권2호
    • /
    • pp.98-104
    • /
    • 2005
  • Saw dust concrete f3r finding out insulation characteristic was tested using test plate $30cm{\times}30cm{\times}5cm$. basically, molds f3r the test of compressive, tensile, normal without sawdust, $0.05\%,\;0.1\%,\;0.2\%,\; 0.4\%,\;0.6\%,\;0.8\%,\;1.0\%,\;1.2\%,\;1.4\%,\;1.6\%,\;1.5\%,\;2.0\%$, mixing proportion. heat conductivity of the saw dust concrete mixed with the above proportion was taken in this study. Thermal conduction of normal concrete depends on mixing proportion strength aggregate character, water content. all these items are specified here in fables. $1.8\%\~2.0\%$ saw-dust mising concrete shows as the faction as normal insulation material has its function. and the higher saw-dust mixing rate becomes, the thermal conduction becomes the less Then, the conclusions are that saw-dust using concrete has better insulation function than normal concrete.