• 한국해양공학회지
• /
• 제24권6호
• /
• pp.61-70
• /
• 2010

This study presents free vibration analyses of perforates steel plates with various cutouts. Four different parameters (shape, size, curvature radius ratio, and rotation of cutouts) were considered to investigate the effects of those parameters on the free vibration characteristics, such as natural frequencies of the perforated steel plates. Three different shapes of cutouts are circle, square, and triangle, and the considered sizes are 5, 10, 15, 20, and 25 mm. For the triangular and square cutouts, the characteristic radii of the inscribed circles of those cutouts were defined. In addition, the curvature radius ratio was defined as the ratio of curvature radius of bluntness and the characteristic radius. Then, total seven different curvature radius ratios (0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1) were considered. To investigate the rotation effect of the cutouts, it was considered four rotations ($0^{\circ}$, $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$) for the square cutouts and three rotations (0, 15, and 30) for the triangular cutouts. All the free vibration analyses were conducted using a general purpose finite element program. From the analyses we found that the most influential parameter for the free vibration response of the perforated plates is the size of cutout. The other factors such as the shape, curvature radius ratio, and rotation are minors; they mainly change the natural frequency as long as the size effect is accompanied.

• Composites Research
• /
• 제25권2호
• /
• pp.46-53
• /
• 2012

펄트루젼 공정에 의해 생산된 FRP 부재는 길이에 제한이 없이 임의의 단면형상으로 제작할 수 있기 때문에 건설 구조용 부재로 사용하기 적합하며, 특히, 각종 화학적 유해환경 등에서 그 성능이 우수하기 때문에 습윤환경 및 해양환경 등의 부식환경에서 그 활용이 두드러지고 있다. 그러나 설계를 위한 관련 규준이 마련되어 있지 않아 이에 대한 연구가 시급한 실정이다. FRP 구조재는 대부분 단면의 효율적 사용을 위해 판요소로 구성된 박판부재를 사용하고 있으며, 이러한 부재를 압축재로 사용할 경우 강도한계상태는 주로 좌굴거동에 의해 결정된다. 이 연구에서는 FRP I형 단면 압축재에 대한 좌굴거동을 이론적으로 해석하였고, 기존 실험적 연구결과와 비교, 분석하여 설계방법 및 설계흐름도를 제안하였다. 제안된 설계방법은 ANSI/AISC 360-10의 방법과 유사한 형태로서 설계자의 편의를 도모하였으며, 비교적 간단한 방법에 의해 PFPR I형 단면 압축재의 설계를 수행할 수 있도록 하였다.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.421-426
• /
• 2017

본 연구에서는 횡등방성 특성을 갖는 인쇄회로기판(PCB)의 물성 예측을 위한 방법을 제안하였다. 등방성 소재와 달리 횡등방성 소재의 물성 취득을 위한 별도의 시험기준은 없으며, PCB와 같이 적층된 형태의 박판 구조물에 대해서는 재료시험 또한 쉽지가 않다. 모달시험을 통해 취득한 모달 파라미터와 상용 소프트웨어인 $OptiStruct^{(R)}$의 치수 최적화 기법을 활용, 시험-해석 간 주파수 차이를 최소화시키는 강성행렬 성분을 도출하여 기계적 물성을 예측하였다. 또한 주파수 별 모드형상을 MAC(Modal Assurance Criteria) 값을 기준으로 비교, 검토하여 예측 물성에 대한 유효성을 확인하였다. 제안된 방법은 향후 PCB를 포함하는 전장제품의 설계검증을 위한 구조해석에 확대 적용될 것으로 기대한다.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.798-804
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847 mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software Is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the ND spring. And then, the results of the modal testing are compared with those of the FE analysis. The natural frequencies as well as the mode shapes obtained by the experiment have a greater similarity to the results by the contact model than the previous beam-spring model. In audition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed : one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former Finally, the vibration displacements are measured in the range of 0.l12∼0.214 mm for the excitation force of 0.25∼0.75 N.

• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.52-59
• /
• 2020

Automatic tool changers (ATCs) can be divided into drum and chain types. Drum-type ATCs contain a magazine, where the tools are mounted, and a cam gearbox, which swaps the tools via roller gear and grooved plate cams. Drum-type ATCs are advantageous in that the operating time for the tool magazine is more rapid than that of chain-type ATCs and the length of the unit is shorter. Thus, drum-type ATCs can be fabricated into various shapes and forms depending on the number of tools and the magazine size in accordance with machining center requirements and consumer demand. In particular, the price competitiveness of a machining center with a drum-type ATC is higher, while drum-type ATCs are more rigid with fewer parts, possibly reducing the need for regular servicing. This study aims to verify the structural stability and design validity of the magazine base, which is the main structure of a drum-type ATC, using finite element analysis. This study kinematically verifies the specifications of the selected drive motor and reducer and assessed the design of the cam gearbox. It also conducts a structural analysis of the roller camp, which is the core component of the cam gearbox, based on the results of the kinetodynamic analysis, thus validating the structural design.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.979-985
• /
• 2017

This paper, which covers a fluorescence microscopy image of brain tumor cells, looks at drug reactions by treating different types and concentrations of drugs on a plate of $24{\times}16$ wells. Due to the limitation of the field of view, a well was taken into 9 field images, and each has an overlapping area with its neighboring fields. To analyze more precisely, image stitching is needed. The basic method is finding a similar area using normalized cross-correlation (NCC). The problem is that some overlapping areas may not have any duplicated cells that help to find the matching point. In addition, the cell objects have similar sizes and shapes, which makes distinguishing them difficult. To avoid calculating similarity between blank areas and roughly distinguishing different cells, thresholding is added. The thresholding method classifies background and cell objects based on fixed thresholds and finds the location of the first seen cell. After getting its location, NCC is used to find the best correlation point. The results are compared with a simple boundary stitched image. Our proposed method stitches images that are connected in a grid form without collision, selecting the best correlation point among areas that contain overlapping cells and ones without it.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.302-311
• /
• 2010

In this research, the refinement behavior of the coarse magnesium powders fabricated by gas atomization was investigated as a function of milling time using a short duration high-energy ball milling equipment, which produces fine powders by means of an ultra high-energy within a short duration. The microstructure, hardness, and formability of the powders were investigated as a function of milling time using X-ray diffraction, scanning electron microscopy, Vickers micro-hardness tester and magnetic pulsed compaction. The particle morphology of Mg powders changed from spherical particles of feed metals to irregular oval particles, then platetype particles, with increasing milling time. Due to having HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, resulting in producing plate-type powders. With increasing milling time, the particle size increased until 5 minutes, then decreased gradually reaching a uniform size of about 50 micrometer after 20 minutes. The relative density of the initial power was 98% before milling, and mechanically milled powder was 92~94% with increase milling time (1~5 min) then it increased to 99% after milling for 20 minutes because of the change in particle shapes.

• 대한기계학회논문집A
• /
• 제40권7호
• /
• pp.647-652
• /
• 2016

유도초음파를 활용한 비파괴검사기법은 장거리 배관 검사에 많이 활용된다. 장시간 사용에 따라 배관에는 표면 부식과 같은 형태의 결함이 주로 발생한다. 표면 부식형 결함의 경우 장거리 유도 초음파 검사 기법을 활용한 신호 해석에 어려움이 있다. 상반 정리는 복잡한 수학적 표현을 간단히 나타내주는 기법으로 잘 알려져 있다. 상반 정리는 평판, 반무한체의 산란 문제를 해결하는데 이미 적용된 바가 있지만 원통형 구조물에서는 적용된 사례가 없다. 이 논문에서는 배관 진단을 위해 상용 장비에서 많이 사용되는 비틀림파의 산란 신호를 상반 정리를 적용하여 해석하였다. 산란 신호는 상반 정리를 활용하여 산란 체의 형태와 위치에 따라 단순한 닫힘 해로 표현하였다. 타원형 결함과 사각 결함의 폭과 깊이 변화에 따라 주파수 별로 발생되는 산란 신호가 계산되었으며, 주파수 증가에 따른 주기적인 결과를 나타내는 것을 확인하였다. 산란 신호 해석을 위한 닫힘 해는 결함의 크기를 정량적으로 해석하는데 중요한 역할을 할 것으로 기대된다.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.72-79
• /
• 2011

The scope of this investigation is to evaluate the effect of joining parameters on the microstructural features and mechanical properties of dissimilar aluminum alloys, 1mm-thickness fixing AA6K31 at the top position and fixing AA5J32 at the bottom position. The friction stir lap welds were studied under various welding conditions, rotation speed of 1000, 1250, 1500rpm and welding speed of 100, 300, 500, 700mm/min, respectively. Mechanical test has been investigated in terms of tensile shear test and hardness test. The results showed that three type nugget shapes such as onion ring, zigzag type, hooking with the void, have been observed with revolutionary pitch. All welding conditions fractured at the HAZ of top plate, A6K31 and also the strength compare with base metal of lap joints were low efficiency, 52~63%. The thickness of fractured position was decreased with the lower heat input conditions. The relationships were excellent due to linear between the effective thickness of fractured position and peak load. The fractured position was the interface between joint area and not joint area. Also the strength efficiency compared with base metal was lower than decreasing rate of thickness because the hardness was decreased at fractured position due to softened material.

• 대한조선학회지
• /
• 제14권1호
• /
• pp.1-10
• /
• 1977

The major objects of this report are to supplement data of natural frequencies of thin elastic rectangular plates to the available data, and to give an experimental verification for natural frequencies obtained by Rayleigh-Ritz method, the generation set of which are eigenfunctions of Euler beams. For the first object the following five models, for which data only for the fundamental mode or data only for square plates are available, are adopted; (1) two opposed edges are clamped and the other two opposed edges simply supported (C-C, S-S), (2) one edge is simply supported and the other three edges clamped (C-C, C-S), (3) one edge is free and the other three edges clamped (C-C, C-F), (4) two adjacent edges are clamped and the other two adjacent edges free (C-F, C-F). For the (C-C, S-S) model the frequency equation obtained with the mode shapes assumed as of a single trigonometric series is solved. And for the other four models Rayleigh-Ritz method taking eigenfunctions of Euler beams as the generating set is applied. The numerical examples are obtained up to the fourth, the fifth or the sixth order depending on the range of the aspect ratio (0.1-10.0). The number of terms in the generating set for Rayleigh-Ritz method is fifteen for all models. For the experiment three models made of 3.2mm thickness mild steel plate for general structure use were prepared in following size; $300mm{\times}600mm,\;600mm{\times}600mm\;and\;900mm{\times}600mm$. Their boundary conditions are made to fit (C-C, C-F) condition. From the experiment mechanical impedance curves based on the frequency response method were obtained together with phase relation diagrams. The experimental data are resulted in good conformity to calculated values.