• Archives of Plastic Surgery
• /
• 제37권4호
• /
• pp.396-399
• /
• 2010

Purpose: In hand injury, pedicle is usually damaged by avulsion injury or crushing injury. Because of postoperative pedicle obliteration, it is often hard to save the injured hand and fingers, even after successful replantation. The author introduces three cases of extensive hand injury, and successful results after applicatoin of multiple venous grafts to these patients. Methods: In all cases there was no circulation in any finger. In the first case, some vessels were extracted, so venous graft was applied to two sites of severely damaged venous sites. In the second case, venous grafts were applied to all four digital arteries of all fingers except thumb which got severely crushed, and two sites of dorsal veins. In the third case, venous graft was applied to all four digital arteries of all five fingers, and two sites of dorsal veins and palmar veins each. Results: In all cases, survival of hands and fingers was successful. In the second case, however, amputation in thumb and little finger at DIP joint level was inevitable, because of its severe damage, and the large dorsal defect on index finger was filled with DIEP free flap. Thumb was reconstructed with toe-to-thumb free flap, and additional debulking procedures and contracture release is furtherly needed. In the first case, additional surgery was done, as FDP tendon got re-ruptured, but in long term follow-up, satisfactory range of motion was attained. In the third case, FTSG on dorsal skin region was planned. as flap on dorsal area got partial necrosis. Conclusion: In hand injury, there are many structures to be repaired, but sometimes venous graft is avoided for its long operating time. Even though the length of damaged vessel is enough for anastomosis, the endothelium is often damaged (zone of injury). In extensive hand injury, successful reconstruction would be possible with active venous graft to all vessels suspicious for damage.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.617-625
• /
• 2005

지진등과 같은 횡력에 대해 저항하기 위해 자주 사용되는 브레이스는 좌굴하중 이후에는 좌굴에 의해 내력이 저하하는 등 안정된 이력특성을 발휘하기 어렵다. 따라서 본 연구에서는 브레이스의 좌굴을 방지하고 소성 변형 능력을 크게 하기 위하여 slit plate로 이루어진 damper를 부착한 브레이스의 형태를 제안하였다. 그리고 이러한 탄소성 이력댐퍼를 부착한 브레이스재의 이력 특성을 파악하기 위한 실험에서 얻어진 결과를 분석하고 그 가능성을 검토하였다.

• 대한기계학회논문집
• /
• 제5권2호
• /
• pp.122-130
• /
• 1981

Equation of equilibrium is derived and solved for an infinite isotropic solid under applied hydrostatic stress which is uniform at large distance, and disturbed by a spherical precipitate which has isotropoc elastic constants dirrerent form those of the matrix. A linear strain hardening behavior of the matrix is assumed, and an elasto-plastic sloution is obtained. The difference of the total strain energy stored inthe infinite solid with and without a precipitate is computed, and compared with that for purely elastic case. Finally the effect of the ratio of the bulk modulus of the precipitate to that of the matrix and the effct of linear strain hardening rate on the plastic zone size and the energy difference are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.359-364
• /
• 2004

In this study, experiments were tried on the mixed-mode I+II single overloading model which changes the loading mode of overload and fatigue load. Aspects of deformation field in front of the crack which is formed by mixed-mode I+II single overloading were experimentally studied. Then the shape and size of mixed-mode plastic zone were approximately calculated. The propagation behavior of fatigue crack was examined under the test conditions combined by changing the loading mode. The behavior of fatigue cracks were greatly affected by shapes of plastic deformation field and applying mode of fatigue load. Accuracy of prediction and evaluation for fatigue life may be improved by considering all aspects of deformation and behavior of fatigue cracks.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.54-59
• /
• 2003

In the present work, a formula for plate deformation produced by line heating, in terms of process parameters such as heat input and plate dimensions, is developed analytically using an eigenstrain concept. The residual deformation that was due to thermal process was depends on the magnitude and region of plastic strains at heating zone. The magnitude of plastic strains was determined by disk model and its region was calculated using the Rosenthal"s solution. The vertical displacement of the plate was analyzed by using an infinite laminated plate theory to consider a cuboidal inclusion with an eigenstrain. Comparison of the calculated results and experimental data shows the accuracy and validity of proposed method.thod.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.54-58
• /
• 1991

It is well known that metal cutting leaves a plastically deformed layer in the machined surface. This residual phenomenon affects in various forms the physical properties of machined components such as the fatigue strength, the dimensional instability, microcracks, and the stress corrosion cracking. These physical properties, so called surface integrity, are very important for designing highly stressed and critically loaded components. Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization process. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation Is to explore the effectiveness of the recrystallization technique in machining applications, and in particular, to find the effect of cutting parameters, i.e., depth of cut and rake angle on the plastic strains.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.33-52
• /
• 2015

Based on the Mohr-Coulomb failure criterion, a gradient-dependent plastic model that considers the strain-softening behavior is presented in this study. Both triaxial shear tests on conventional specimen and precut-specimen, which were obtained from an ancient landslide, are performed to plot the post-peak stress-strain entire-process curves. According to the test results of the soil strength, which reduces from peak to residual strength, the Mohr-Coulomb criterion that considers strain-softening under gradient plastic theory is deduced, where strength reduction depends on the hardening parameter and the Laplacian thereof. The validity of the model is evaluated by the simulation of the results of triaxial shear test, and the computed and measured curves are consistent and independent of the adopted mesh. Finally, a progressive failure of the ancient landslide, which was triggered by slide of the toe, is simulated using this model, and the effects of the strain-softening process on the landslide stability are discussed.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.671-678
• /
• 1998

Hertzian indentation tests with sphere indenters were used to study the mechanical properties of glass-in-filtrated alumina and spinel composites and evaluated the effect of preform microstructure and evaluated the effect of preform microstructure and glass con-tents on contanct damage and strength. The spinel composite showed more brittle behavior than the alumina composite which is verified from indentation stress-strain curve cone cracks and quasi-plastic deformation developed at subsurface. Failure originated from either cone cracks(brittle mode) or deformation zone(quasi-plastic mode) above critical load for cracking(Pc) and yield ({{{{ {P }_{Y } }}) with the brittle mode more dominant in the spinels and the quasi-plastic mode more dominant in the aluminas. Even though brittle mode was dominant in the spinel composites the strength degradation from accumulation of damage above these critical loads was conspicuously small suggesting that the glass-infiltrated composites should be highly damage tolerant to the blunt contacts.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.113-123
• /
• 1997

The welding residual stresses produced by welding frequently cause a crack and promote stress corrosion etc. in heat affected zone contained with external load and weakness of material. For the purpose pof relaxation of welding residual stress, post welding heat teratment(PWHT) is widely used. In this paper, the computer program which is based on Thermal-Elasto-plastic-creep theory for plane deformation on developed by finite element method (F.E.M) and verified its propriety by experimental measurement and also by using the developed computer program. The mechanical behavior of butt welding joint is clairfied during PWHT.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.564-571
• /
• 1985

본 논문에서는 미시조직인자를 변화시킨 마르텐사이트-페라이트 복합조직강을 준비하여 균열선단 및 안정영역의 파괴양상과 파괴저항과의 관계를 검토하였다.