Numerical analysis of post welding heat treatment base on the thermal creep elastic-plastic theory

점열탄소성 이론에 의한 용접후열처리에 대한 수치해석

  • Published : 1997.02.01

Abstract

The welding residual stresses produced by welding frequently cause a crack and promote stress corrosion etc. in heat affected zone contained with external load and weakness of material. For the purpose pof relaxation of welding residual stress, post welding heat teratment(PWHT) is widely used. In this paper, the computer program which is based on Thermal-Elasto-plastic-creep theory for plane deformation on developed by finite element method (F.E.M) and verified its propriety by experimental measurement and also by using the developed computer program. The mechanical behavior of butt welding joint is clairfied during PWHT.

Keywords

References

  1. Unified Constitutive Equations for Creep and Palsticity Alan K. Miller
  2. Examples, and Problems Plasticity and Creep Theory Jacek J. Skrzypek;Richard B. Hetnarski
  3. Finite Element Procedures in Engineering Analysis K. J. Bathe
  4. An Estimating Method of Reduction of Welding Residual Stress Relief Annealing (Ⅰ) v.1;2 Y. Ueda;K. Nakacho
  5. Residual Stresses in Thick Weldments A Review of Contemporary Measurement Techniques A. J. A. Parlane
  6. 溶接力學どその應用(第3版) 渡邊;佐藤
  7. 溶接工學(第1版) 佐藤;向井;豊田
  8. 日本溶接學會誌 v.36 no.2 應力除去燒鈍に關する硏究(題1報) 田中;小幡
  9. 日本溶接學會誌 v.33 no.9 應力除去燒鈍に關する硏究(題1報) 內木;山岐(ら)
  10. 日本金屬學會會報 v.18 no.6 應力除去燒なましわれ 武田(外1人)
  11. 大韓熔接學會誌 v.11 no.4 厚板溶接部의 應力除去 熱處理時의 力學的 擧動에 關한 硏究 房漢瑞
  12. 固體力學의 基礎 日本材料學會(編)
  13. 日本溶接學會論文集 v.1-2 應力除去燒なまし處理後の殘留應力の近似推定法(第1報) 上田;中長
  14. 材料の高溫强度論 平修二(外1人)
  15. 有限要素法の基礎ど應用 塑性.粘彈性
  16. クリ-プ强さの理論 J. ハルト(外1人)
  17. 有限要素法による熱應力クリプ熱傳導解析 宮崎(外1人)
  18. 大韓造船學會誌 v.27 no.4 有限要素法에 의한 薄板熔接의 2次元 非正常熱傳導解析 房漢瑞
  19. 大韓熔接學會誌 v.10 no.4 厚板溶接部의 力學的 特性 房漢瑞
  20. 極厚板多層溶接ど應力除去燒なましによる過度及び殘留應力に關する理論的 硏究 K. Nakacho
  21. 日本溶接學會誌;Trans. of JWRI;Trans.of JWS v.4 no.1 厚板溶接部의 應力除去 熱處理時의 力學的 去動에 關한 硏究, 應力除去燒なましの力學問題に對する有限要素法の適用 房漢瑞
  22. 溶接工學 豊田政男(外)
  23. 鎔接治金學 松田 福久
  24. 日本溶接學會論文集 v.4 no.3 厚板補修溶接部の力學的 特性 上田(外)