• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.148-156
• /
• 1993

TiN films were deposited onto high speed steel (SKH9) by plasma assisted chemical vapor deposition (PACVD) using a TiCl4/N2/H2/Ar gas mixture at around 50$0^{\circ}C$. The effects of the deposition temperature, R.F. power and TiCl4 concentration on the deposition of TiN and the microhardness of TiN film were investigated. The crystallinity and the microhardness of TiN films were improved with increase of the deposition temperature. Optimum deposition temperature in this study was 50$0^{\circ}C$, because a softening or phase transformation of the substrate occurred over 50$0^{\circ}C$. A large increase of the film growth rate with a strong(200) preferred orientation was obtained by increasing R.F. power. Much chlorine content of about 10at.% was found in the deposited films and resulted in relatively low average microhardness of about 1, 500Kgf/$\textrm{mm}^2$ compared with the theoretical value(~2, 000Kgf/$\textrm{mm}^2$).

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1990

To investigate the influence of r.f. power and electrode distance on the TiN deposition, TiN films were deposited onto STC3, STD11 steel and Si-wafer from gas mixtures of $TiC_4/N_2/H_2$ using the radio frequency plasma assisted chemical vapor deposition. The crystallinity of TiN film could be improved by the increase of r.f. power and the decrease of electrode distance. The TiN coated layer contains chlorine, its content were decreased with increasing r.f. power as well as decreasing electrode distance. And the thickness of deposited TiN was largely affected by r.f. power and electrode distance. The hardness of deposited TiN reached a maximum value of about Hv 2,000.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.6-6
• /
• 2003

Highly crystalline 5H-polytypic form of sp3-bonded boron nitride (BN) was grown by pulsed-laser-vaporization of BN, where synchronous reactive-plasma packets assisted the crystal growth in the vapor phase. The structure of the product crystallites (˙5 micrometers) was confirmed by using transmission electron diffraction and electron energy loss spectroscopy. This material proved to have a sharp and dominant band at 225 nm by cathode luminescence at room temperatures and corresponding monochromatic images revealed that they uniformly emitted the ultraviolet light. Considering that cubic BN has already been doped as p- and n- type semiconductors, this material may be applied to the light-emitting devices working at almost the deepest limit of the UV region that is functional without vacuum.

• Journal of Surface Science and Engineering
• /
• v.37 no.3
• /
• pp.164-168
• /
• 2004

Polycrystalline silicon thin films were deposited by inductively coupled plasma (ICP) assisted magnetron sputtering using a gas mixture of Ar and $H_2$ on a glass substrate at $250^{\circ}C$. At constant Ar mass flow rate of 10 sccm, the working pressure was changed between 10mTorr and 70mTorr with changing $H_2$ flow rate. The effects of RF power applied to ICP coil and $Ar/H_2$ gas mixing ratio on the properties of the deposited Si films were investigated. The crystallinity was evaluated by both X-ray diffraction and Raman spectroscopy. From the results of Raman spectroscopy, the crystallinity was improved as hydrogen mixing ratio was increased up to$ Ar/H_2$=10/16 sccm; the maximum crystalline fraction was 74% at this condition. When RF power applied to ICP coil was increased, the crystallinity was also increased around 78%. In order to investigate the surface roughness of the deposited films, Atomic Force Microscopy was used.

• Applied Science and Convergence Technology
• /
• v.23 no.3
• /
• pp.145-150
• /
• 2014

MgO thin films were deposited by internal ICP-assisted reactive-magnetron sputtering with bipolar pulse bias on a substrate to suppress random arcs. Mg is reactively sputtered by a bipolar pulsed DC power of 100 kHz into ICP generated by a dielectrically shielded internal antenna. At a mass flow ratio of $Ar/O_2$ = 10 : 2 and an ICP/sputter power ratio of 1 : 1, optimal film properties were obtained (a powder-like crystal orientation distribution and a RMS surface roughness of approximately 0.42 nm). A bipolar pulse substrate bias at a proper frequency (~a few kHz) prevented random arc events. The crystalline preferred orientations varied between the (111), (200) and (220) orientations. By optimizing the plasma conditions, films having similar bulk crystallinity characteristics (JCPDS data) were successfully obtained.

• Journal of the Korean Vacuum Society
• /
• v.9 no.1
• /
• pp.16-23
• /
• 2000

The epitaxial growth of $CeO_2$ films has been investigated on three different substrates-Si(111), $SrTiO_3$(001), and MgO(001)-over wide range of growth parameters using oxygen-plasma-assisted molecular beam epitaxy. Pure-phase, single-crystalline epitaxial films of $CeO_2$ (001) have been grown only on $SrTiO_3$(001). We discuss the growth conditions in conjunction with the choice of substrates required to synthe-size this oxide, as well as the associated characterization by menas of x-ray diffraction, reflection high-energy electron diffraction, low-energy electron diffraction, and x-ray photoelectron spectroscopy and diffraction. Successful growth of single crystalline $CeO_2$ depends critically on the choice of substrate and is rather insensitive to the growth conditions studied in this investigation. $CeO_2$(001) films on $SrTiO_3$exhibit the sturcture of bulk $CeO_2$ without surface reconstructions. Ti outdiffusion is observed on the films grown temperatures above $650^{\circ}C$.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.243-250
• /
• 2019

The nanosecond laser assisted ablation have been investigated. The biocompatable polymer PMMA was employed as the target material and the two distinctive surface conditions were test. The first surface condition is a dry surface for which the target surface is exposed to air and the second surface condition is the wet surface for which the target surface is covered with dehydrated water. The ablation volume, the laser induced acoustic wave, the laser induced plasma were investigated for both wet and dry condition. The nanosecond laser pulse ablatied more on the wet surface compared to the dry surface. The enhanced ablation of wet surface is attributed to the confined acoustic wave and the laser-induced plasma in the liquid layer.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.111-116
• /
• 2009

In this paper, a plasma-assisted patterning method for the organic layers of organic light-emitting diodes (OLEDs) and its effect on the OLED performances are reported. Oxygen plasma was used to etch the organic layers, using the top electrode consisting of lithium fluoride and aluminum as an etching mask. Although the current flow at low voltages increased for the etched OLEDs, there was no significant degradation of the OLED efficiency and lifetime in comparison with the conventional OLEDs. Therefore, this method can be used to reduce the ohmic voltage drop along the common top electrodes by connecting the top electrode with highly conductive bus lines after the common organic layers on the bus lines are etched by plasma. To further analyze the current increase at low voltages, the plasma patterning effect on the OLED performance was investigated by changing the device sizes, especially in one direction, and by changing the etching depth in the vertical direction of the device. It was found that the current flow increase at low voltages was not proportional to the device sizes, indicating that the current flow increase does not come from the leakage current along the etched sides. In the etching depth experiment, the current flow at low voltages did not increase when the etching process was stopped in the middle of the hole transport layer. This means that the current flow increase at low voltages is closely related to the modification of the hole injection layer, and thus, to the modification of the interface between the hole injection layer and the bottom electrode.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.209-210
• /
• 2013

In this study, the tribological and thermal properties of TiAlCN coatings were investigated to evaluate their feasibility in automobile applications. TiAlCN coatings with carbon compositions between 25 and 65 at.% were prepared by inductively coupled plasma (ICP) assisted sputtering and were annealed at 400, 500, and $600^{\circ}C$ in air.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.146-146
• /
• 2002