• 한국안전학회지
• /
• 제20권1호
• /
• pp.7-12
• /
• 2005

In heavy industrial fields such as power plant and chemical plant, it is often necessary to restore a damaged part of large machinery or structure which is installed in the hazard working place. In this paper, to evaluate the safety of plastic deformed cylindrical beam a finite element technique has been used. The variations of residual stresses on the process of damaging and restoring for surfaces and cross-sections have been examined. The results show that the maximum von Mises stresses occur outer cylinder surfaces of boundary between cylindrical beam support md cylindrical beam when deformation procedure and restoring force is applied. The maximum residual stress remains 158.6MPa in the inner wall and this value correspond to $53\%$ of yield stress then restoration procedure is finished.

• Journal of Plant Biology
• /
• 제37권3호
• /
• pp.357-363
• /
• 1994

An expreiment with non-nodulating alfalfa (Medicago sativa L.) plants was designed to investigate the changes in protein contents and the activities of proteolytic enzymes during a regrowth period of 24 d. Shoot removal caused a depression of root growth and significantly reduced protein contents in roots. An initial decline of root proteins for the first 10 d was followed by a rapid recovery from d 11 to 24. The major increase of regrowing shoot weight occurred also from d 11. The activities of aminopeptidase and endoprotease slightly decreased in regrowing leaves, while protein contents remains stable after shoot removal. Roots exhibited source behaviour with a rapid increase of endoprotease activities for the first 10 d of regrowth; about a 370% increase over the initial level was observed. Increase in endoprotease activity in roots coincided with the time of protein remobilization after shoot removal, indicating the important role of endoproteases in protein degradation.

• Journal of Plant Biology
• /
• 제12권4호
• /
• pp.1-8
• /
• 1969

According to the mode of development of antheridia and antheridial mother cells, the antheridium formation of Rhodymeniales is divided into two types. I. Separate Type; Antheridial mother cells are separate one another. Antheridia and the mother cell are surrounded by the common wall. The superficial gelatinous wall covering antheridial sori disappears during the antheridium formation. Spermatia are comparatively large. Halosaccion saccatum, H. firmum, Rhodymenia palmata and Rh. marginicrassa. II. Seriate Type; Antheridial mother cells, originated from the same epidermal cell, are seriate one another with a pit-connection. Antheridia and the mother cell do not have the common wall. The superficial gelatinous wall remains during the antheridium formation. Spermatia are comparatively small. Rhodymenia intricata, Rh. pertusa, Chrysymenia wrightii, Lomentaria hakodatensis, L. catenata, Binghamia californica and Champia parvula.

• Journal of Plant Biology
• /
• 제37권4호
• /
• pp.421-428
• /
• 1994

The vegetative and male reproductive anatomy of a marine alga, Laurencia intercalaris sp. nov. (Rhodomelaceae, Rhodophyta), is described from subtidal habitats of eastern and southern Korea. This species has terete thalli with entangled fibrous holdfasts and regularly alternate branching of ultimate branchlets, and is inseparable from L. okamurae Yamada on the basis of habit. Vegetative axial cells produce a trichoblast and four pericentral cells in an alternating sequence. Spermatangia are produced intercalary or subterminally from one of two laterals on suprabasal cells of trichoblasts arising from axial cells in apical pits of branchlets. The other lateral remains sterile. In this sterile lateral, budding-like regeneration occurs on older segments that are oabscised. Comparison is made with other related Laurencia species, particularly those with terete thalli. The vegetative anatomy and the regeneration in sterile laterals of male trichoblasts, with the mode of spermatangial formation, distinguish the new species from previously described species of Laurencia including L. okamurae.

• 식물분류학회지
• /
• 제52권4호
• /
• pp.235-245
• /
• 2022

Bhutan is endowed with rich biodiversity with several edible and useful fern species. Ferns have been used by local communities for centuries as vegetables, ethnobotanical artifacts, and as medicines. Owing to the limited study of edible and useful pteridophytes in the country, the knowledgebase remains poor. In this study, we attempt to document edible and useful fern species in the country scientifically while also providing an annotated checklist.

• Molecules and Cells
• /
• 제43권7호
• /
• pp.645-661
• /
• 2020

Leaf senescence is a developmental process by which a plant actively remobilizes nutrients from aged and photosynthetically inefficient leaves to young growing ones by disassembling organelles and degrading macromolecules. Senescence is accelerated by age and environmental stresses such as prolonged darkness. Phytochrome B (phyB) inhibits leaf senescence by inhibiting phytochrome-interacting factor 4 (PIF4) and PIF5 in prolonged darkness. However, it remains unknown whether phyB mediates the temperature signal that regulates leaf senescence. We found the light-activated form of phyB (Pfr) remains active at least four days after a transfer to darkness at 20℃ but is inactivated more rapidly at 28℃. This faster inactivation of Pfr further increases PIF4 protein levels at the higher ambient temperature. In addition, PIF4 mRNA levels rise faster after the transfer to darkness at high ambient temperature via a mechanism that depends on ELF3 but not phyB. Increased PIF4 protein then binds to the ORE1 promoter and activates its expression together with ABA and ethylene signaling, accelerating leaf senescence at high ambient temperature. Our results support a role for the phy-PIF signaling module in integrating not only light signaling but also temperature signaling in the regulation of leaf senescence.

• Plant Biotechnology Reports
• /
• 제5권3호
• /
• pp.265-271
• /
• 2011

The cultivated potato as well as its tuber-bearing relatives are considered model plants for cell and tissue culture, and therefore for exploiting the genetic variation induced by in vitro culture. The association between molecular stability and tissue culture in different genetic backgrounds and ploidy levels has already been explored. However, it still remains to be ascertained whether somaclonal variation differs between callus-derived chromosome-doubled and undoubled regenerants. Our research aimed at investigating, through amplified fragment length polymorphism (AFLP) markers, the genetic changes in marker-banding patterns of diploid and tetraploid regenerants obtained from one clone each of Solanum bulbocastanum Dunal and S. cardiophyllum Lindl (both 2n = 2x = 24) and tetraploids from cultivated S. tuberosum L. (2n = 4x = 48). Pairwise comparisons between the banding patterns of regenerants and parents allowed detecting considerable changes associated to in vitro culture both at diploid and tetraploid level. The percentages of polymorphic bands between diploid and tetraploid regenerants were, respectively, 57 and 69% in S. bulbocastanum and 58 and 63% in S. cardiophyllum. On average, the frequencies of lost parental fragments in regenerants were significantly higher than novel bands both in S. bulbocastanum (48 vs. 22%) and S. tuberosum (36 vs. 18%) regenerants. By contrast, in S. cardiophyllum, a similar incidence of the two events was detected (32 vs. 29%). Our results revealed that structural changes after tissue culture process strongly affected the genome of the species studied, but diploid and tetraploids regenerated plants responded equally.

• Molecules and Cells
• /
• 제39권6호
• /
• pp.447-459
• /
• 2016

Many studies have been conducted to understand plant stress responses to salinity because irrigation-dependent salt accumulation compromises crop productivity and also to understand the mechanism through which some plants thrive under saline conditions. As mechanistic understanding has increased during the last decades, discovery-oriented approaches have begun to identify genetic determinants of salt tolerance. In addition to osmolytes, osmoprotectants, radical detoxification, ion transport systems, and changes in hormone levels and hormone-guided communications, the Salt Overly Sensitive (SOS) pathway has emerged to be a major defense mechanism. However, the mechanism by which the components of the SOS pathway are integrated to ultimately orchestrate plant-wide tolerance to salinity stress remains unclear. A higher-level control mechanism has recently emerged as a result of recognizing the involvement of GIGANTEA (GI), a protein involved in maintaining the plant circadian clock and control switch in flowering. The loss of GI function confers high tolerance to salt stress via its interaction with the components of the SOS pathway. The mechanism underlying this observation indicates the association between GI and the SOS pathway and thus, given the key influence of the circadian clock and the pathway on photoperiodic flowering, the association between GI and SOS can regulate growth and stress tolerance. In this review, we will analyze the components of the SOS pathways, with emphasis on the integration of components recognized as hallmarks of a halophytic lifestyle.

• Structural Engineering and Mechanics
• /
• 제78권1호
• /
• pp.31-39
• /
• 2021

To investigate numerically the effect of all parameters on the outcome of an aircraft impact into robust engineering structures like nuclear power plant containments is a tedious task. In order to reduce the problem to a manageable size, we propose a single dimensionless parameter, the damage potential, to characterize the main features of the impact. The damage potential, which is the ratio of the initial kinetic energy of the aircraft to the work required to crush it, enables us to find the crucial parameter settings that need to be modelled numerically in detail. We show in this paper that the damage potential is indeed the most important parameter of the impact that determines the time-dependent reaction force when either finite element (FE) modelling or the Riera model is applied. We find that parameters that do not alter the damage potential, like elasticity of the target, are of secondary importance and if parameters are altered in a way that the damage potential remains the same then the course of the impact remains similar. We show, however, that the maximum value of the reaction force can be higher in case of elastic targets than in case of rigid targets due to the vibration of the target. The difference between the Riera and FE model results is also found to depend on the damage potential.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.587-591
• /
• 1997

The DGs (Diesel Generators) in NPP (Nuclear Power Plant) has been used for the emergency electric power source to shut down the nuclear reactor safely in case of station blackout. The RCM (Reliability Centered Maintenance) has been applied to DGs for increasing the safety of NPP. The structured defects of DG were not remedied by the improvement of maintenance method. As the first stage of RCM, to find the structured defects, its failure modes were searched and analyzed through the ten year maintenance information. The structured defects such as the air compressor, the lubricating oil pressure, and the insufficient load were the root causes of main failures. The air reservoir reinstallation, the lubricating oil tube modification, the load bank installation, and the qualitative instrumentation were the solutions for the hardware oriented RCM of DGs. There remains the software oriented RCM such as the rejection of useless maintenance, the preventive maintenance, the database of maintenance information, and the predictive maintenance.