• 제목/요약/키워드: planar microstrip

검색결과 156건 처리시간 0.021초

GPS 대역을 포함한 소형화된 이중대역 평면형 안테나 (Compact Dual-Band Planar Antenna with GPS Band)

  • 조규필;신동기;이영순
    • 한국항행학회논문지
    • /
    • 제24권3호
    • /
    • pp.232-237
    • /
    • 2020
  • 본 논문에서는 GPS 대역과 휴대용 기기에 적용을 위한 마이크로스트립 급전 이중대역 평면형 안테나를 제안하였다. 이중 대역 특성을 얻기 위하여 개방 L-형 슬롯과 구부러진 사각형 슬롯이 사용된다. 제안된 안테나는 유전상수(𝜖r)가 4.3, 두께가 1.6 mm, 크기가 57 × 57 ㎟ 인 FR4 기판에 설계 및 제작 되었다. 제안된 안테나의 제작 및 측정 결과 임피던스 대역폭(|S11|≤ -10dB)이 GPS 대역에서 60 MHz (1550 ~ 1610 MHz), DCS / IMT-2000 대역에서 670 MHz (1690 ~ 2360 MHz)로 GPS와 DCS / IMT-2000 대역을 충분하게 만족한다. 또한, 사용하고자 하는 대역에서 안정되고 우수한 무지향성 방사패턴을 얻을 수 있었으며, 2.36 dBi 이상의 높은 이득과 90% 이상의 효율을 얻을 수 있었다.

디지털방송 수신용 평면 준-야기 안테나의 소형화 설계 (Design of Compact Planar Quasi-Yagi Antenna for DTV Reception)

  • 이종익;한대희;김수민;김건균;여준호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.583-585
    • /
    • 2012
  • 본 논문에서는 지상파 디지털방송 수신용 광대역 평면 야기 안테나의 설계방법에 대해 연구하였다. 다이폴을 급전하는 코프래너 스트립은 스트립에 내장된 마이크로스트립과 연결되고 종단은 단락되어 있다. 급전되는 다이폴에 근접한 영역에 폭이 넓은 스트립 도파기를 부가하여 광대역 임피던스 정합과 고주파 대역의 이득특성을 구현하였고, 접지면 반사기를 추가하여 저주파 대역의 이득특성을 개선하였다. 안테나를 소형화하기 위해 다이폴과 반사기의 모양을 반 보우타이(V)-형으로 변형하였으며, 여러 가지 파라미터들이 안테나 특성에 미치는 영향을 관찰하였다. 제안된 구조의 안테나를 지상파 DTV 방송 주파수대역인 470-806 MHz 대역에서 동작하도록 설계하였다. 최적화된 안테나를 FR4 기판 상에 제작한 후 특성 실험을 통하여 연구결과의 타당성을 검증하였다.

  • PDF

실내 디지털 TV 수신용 광대역 평면 다이폴 안테나 설계 (Design of Broadband Planar Dipole Antenna for Indoor Digital TV Reception)

  • 이종익;여준호;박진택
    • 한국정보통신학회논문지
    • /
    • 제18권3호
    • /
    • pp.497-502
    • /
    • 2014
  • 본 논문에서는 지상파 디지털 TV 수신용 광대역 평면 다이폴 안테나 설계 방법에 대해 연구하였다. 코플래너 스트립으로 급전되는 평면 다이폴을 반 보우-타이형으로 소형화하였다. 급전 마이크로스트립 선로와 코플래너 스트립 선로 간의 밸런은 코플래너 스트립 중앙으로 삽입된 직사각형 패치로 구현하였다. 제안된 안테나는 이중 공진 구조로서 다이폴에 의한 공진과 밸런이 부착된 코플래너 스트립 선로에 의한 공진으로 구성된다. 제안된 안테나의 파라미터들이 안테나의 특성에 미치는 영향을 분석하고 지상파 디지털방송 주파수 대역인 470-806 MHz 대역에서 동작하도록 설계하였다. 설계된 안테나를 $95mm{\times}178mm$ 크기의 FR4 기판 상에 제작 후 실험을 통하여 연구결과의 타당성을 검증하였다.

슬롯 장하에 의한 UHF 대역 평면 안테나의 소형화 설계 (Miniaturization of UHF Planar Antenna Employing Slot-loading)

  • 전중창;이동현;김태수;김현덕
    • 한국정보통신학회논문지
    • /
    • 제12권6호
    • /
    • pp.979-983
    • /
    • 2008
  • 평면 안테나는 막대형 모노폴 안테나에 비하여 돌출부위가 없으므로 옥외 계측자동화시설의 데이터 전송에 효과적으로 사용될 수 있다. 그러나 UHF 대역에서는 크기로 인하여 평면 안테나의 사용이 상당히 제한되고 있다. 본 논문에서는 400MHz UHF 대역의 ISM 밴드를 사용하는 AMR (Automatic Meter Reading) 시스템에 적용할 수 있는 평면 안테나의 소형화 설계를 연구하였다. 평면 안테나는 FR-4 기판의 마이크로스트립 패치 구조이며, 소형화는 패치에 슬롯을 장하하여 설계되었다. 먼저 직사각형 슬롯을 사용하여 슬롯이 안테나 소형화에 미치는 영향을 파악한 후 보다 복잡한 형태의 슬롯을 적용하여 UHF 대역에서 37.9% 크기가 감소된 안테나를 제작하였다. 제작된 안테나는 야외 설치를 위한 안테나 보호용으로 표면에 에폭시 코팅 처리가 이루어졌으며, 공진 주파수 변화에 대한 에폭시 코팅의 영향도 분석되었다.

평면형 패치 안테나의 최적설계를 위한 PSO와 APSO 알고리즘 비교 연구 (A Comparative Study on the PSO and APSO Algorithms for the Optimal Design of Planar Patch Antennas)

  • 김군태;김형석
    • 전기학회논문지
    • /
    • 제62권11호
    • /
    • pp.1578-1583
    • /
    • 2013
  • In this paper, stochastic optimization algorithms of PSO (Particle Swarm Optimization) and APSO (Adaptive Particle Swam Optimization) are studied and compared. It is revealed that the APSO provides faster convergence and better search efficiency than the conventional PSO when they are adopted to find the global minimum of a two-dimensional function. The advantages of the APSO comes from the ability to control the inertia weight, and acceleration coefficients. To verify that the APSO is working better than the standard PSO, the design of a 10GHz microstrip patch as one of the elements of a high frequency array antenna is taken as a test-case and shows the optimized result with 5 iterations in the APSO and 28 iterations in th PSO.

고조파 억제용 고온초전도 평면형 11-극 저역통과 필터의 제작 (Planar type high-$T_{c}$ Superconductor 11-pole Lowpass Filter for Suppression of Harmonics)

  • 강광용;김철수;곽민환
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.159-162
    • /
    • 2002
  • The eleventh-order coupled line lowpass filter(LPF) was designed to suppress harmonics and spurious signals. The microstrip type LPF was fabricated using a high-$T_{c}$ superconductor(HTS) $YBa_{2}$$Cu_{3}$$O_{7-x}$(YBCO) thin film with the $CeO_{2}$ buffer layer which was deposited on the sapphire ($Al_{2}O_{3}$) substrate of 30 x 30 $mm^{2}$. The coupled-line type LPF was designed for 1.2 GHz of cutoff frequency with 0.01 dB of ripple level at passband. The fabricated HTS LPF shows excellent attenuation characteristics in stopband of 1.2~9.5GHz (7-attenuation poles in the stopband), and shows low insertion loss (0.2 dB) and return loss (17.1 dB) in the pass- band. These measured results match well with those obtained by the EM simulation. This clearly demonstrates that the HTS LPF can suppress harmonics and spurious signals effectively.

  • PDF

광대역 저지특성을 갖는 반파장 저역통과 여파기 설계 (Design of Half-Wavelength Low-PASS Filter with Wideband Rejection Characteristic)

  • 김영태;김영주;박준석;김형석;임재봉;조홍구
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.293-295
    • /
    • 2003
  • In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.

  • PDF

10 Gbps SDH 광전송시스템을 위한 클럭보상/데이타 재생회로용 전압제어 hair-pin 공진 발진기의 설계 (A design of voltage controlled hair-pin resonator oscillator for the use of clock precovery/data regeneration circuit in 10 Gbps SDH fiber optic systems)

  • 연영호;이수열;이주열;유태완;박문수;홍의석
    • 한국통신학회논문지
    • /
    • 제21권5호
    • /
    • pp.1304-1316
    • /
    • 1996
  • In this paper, A VCO(Voltage Controlled Oscillator) in use of clock recovery/data regeneration circuit for 10 Gbps fiber optic receivers was developed. The improved hair-pin resonator with a parallel coupled lines, which has been applied to microstrip filters, was used as a resonance part. As a frequcncy tuning device by substituting 3-terminalMESFET vaaractor for varactor diode, an MMIC manufacturing process will be simplified. Since a hair-pin resonator is planar type compared to the dielectric resonator and has a relatively flat reactance verus frequency, it will be favorable to apply a hair-pin resonator to an MMIC, in addition wideband frequency tuning range is able to be obtained.

  • PDF

Miniaturization of an Ultra-Wideband Antenna with Two Spiral Elements

  • Hong, Seok-Jin;Choi, Jae-Hoon
    • ETRI Journal
    • /
    • 제31권1호
    • /
    • pp.71-73
    • /
    • 2009
  • In this letter, novel antennas with two spiral elements are presented for ultra-wideband application. The original antenna consists of a T-shaped microstrip feed line, two spiral radiating elements, and a ground plane with two circular slots. It measures 30 mm ${\times}$ 40 mm ${\times}$ 1.6 mm. Spiral elements are used to increase the lower bandwidth limit. To further reduce the size of the antenna, the original antenna is cut in half by using the symmetry of the surface current distributions. The proposed antennas feature omnidirectional radiation patterns and good gain flatness.

  • PDF

마이크로파 feedline을 고려한 진행파형 광변조기의 특성 분석 (Microwave characteristics of traveling-wave modulator considering the microwave feedline)

  • 구민주;옥성해;윤영설;문연태;김도균;최영완
    • 대한전자공학회논문지SD
    • /
    • 제41권4호
    • /
    • pp.41-47
    • /
    • 2004
  • 본 논문에서는 마이크로파 feedline을 포함하고, 광도파관과 마이크로파 feedline간의 임피던스 부정합을 고려하여 전계 흡수광변조기(traveling-wave electro-absorption modulator, TW-EAM)의 마이크로파 특성을 분석하였다. Co-planar waveguide(CPW)와 microstrip의 하이브리드 구조를 가지는 광도파관 부분은 등가회로를 통해 모델링 하였으며, 등가회로의 인덕턴스(L)와 커패시턴스 (C)는 3차원 FDTD를 기반으로 한 수식화를 통하여 구하였다. CPW 구조의 마이크로파 feedline은 모멘텀방식을 이용해 분석하였다. 이와 같은 분석을 통해 TW-EAM의 특성을 보다 정확하게 분석 할 수 있음을 제시한다.