• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.159-167
• /
• 2020

The resilience performance evaluation method of a structure can evaluate the ability to recover after an earthquake disaster, and this study deals with the consideration and introduction of the resilience performance evaluation method. The resilience evaluation method can be expressed as a quantified number by constructing a loss estimation model and a recovery evaluation model. The recovery evaluation model should consider downtime in addition to the repair time, and the loss estimation model should consider not only direct loss to structures and non-structures, but also indirect loss due to functional loss of the building. In addition, to build a loss estimation model, the structure should be simplified to perform an efficient analysis. Therefore, in this study, the equivalent terminal induction system proposed cantilever-type and rahmen-type SDOF, and it is evaluated somewhat conservatively compared to the example structure, and it is judged that there is a need to improve the hysteresis characteristics by applying the stiffness reduction factor of the SDOF model.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1252-1252
• /
• 2022

Temporary work that utilizes temporary equipment (e.g., system scaffold and system pipe support) in construction work is one of the most vulnerable work from a safety perspective in South Korea. Typically, temporary equipment is reused at construction sites. The Korea Occupational Safety and Health Agency announced guidelines regarding the performance standards for reusable temporary equipment to prevent the accidental collapse of temporary facilities. Nevertheless, temporary facilities' collapse still occurs, which could be attributed to a degradation in the performance due to the reuse of temporary equipment. Therefore, this study investigated the performance of simple temporary structures assembled with new and reused equipment. To this end, an experimental module was designed based on previous research cases, and two experimental models were constructed, in which one was assembled using new equipment (Model A), and the other was built using reused equipment (Model B). To determine the performance of each model, a load test was conducted to measure the maximum load that each model could withstand. The experimental results revealed that the maximum load of Model B was 15% lower than that of Model A. This indicates that there is a meaningful performance difference between those two models. Based on this result, the authors decided to perform additional tests with more realistic models than previous ones. The new experimental module was designed to ensure compliance with the Korean design guidelines. In this presentation, the authors show details of the first tests and their results and plan for the additional test.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.65-72
• /
• 2014

Purpose - Because of the emphasis on the necessity of academic-industrial cooperation between companies and universities, there are various ongoing academic-industrial cooperation programs led by the government. As government actively supports such cooperation as policy,and universities vitalize new technology development, academic-industrial cooperation between companies and universities is being recognized as an important growth engine for companies the competitiveness of academic-industrial cooperation is also attracting more interest. The government has vitalized human resource fostering, practical R&D, and technology transfer to companies since 2012 by executing a "leading university fostering project for academic-industrial cooperation." Based on an organic interlink among universities, industry, and research institutes, the government also created and is promoting several models of such cooperation between companies and universities to support shared growth of industry and local universities. The purpose of academic-industrial cooperation is growth and benefit fromtechnology development, technical cooperation, and technology transfer between companies and universities. Research design, data, and methodology - As more academic-industrial cooperation efforts are ledby companies due to the limitation in technology-focused commercialization cooperation, the academic-industrial cooperation system became fragmented and it is losing the potential for future advancement. Specifically, as differences between universities grow, academic-industrial cooperation between companies and universities based on new technology from universities is finding difficulty advancing,while systematic support from companies to enhance the performance of businesses created by academic-industrial cooperation is also insufficient. Accordingly, this study established a growth model for the advancement of academic-industrial cooperation between companies and universities and suggested a plan to strengthen the competitiveness and promote the future advancementof academic-industrial cooperation between companies and universities by analyzing the current situation of such cooperation and diagnosing its issues. Results - This study explored the concept and current status of academic-industrial cooperation relationships and analyzed related issues. For such cooperative organizations to be competitive, the employment environment of professional human resources for academic-industrial cooperation should be improved and measures to secure professional resources should be taken as early as possible. Though the academic-industrial cooperation now is being led by government, there is a limitation based on business models, which require creation of profit; however, an academic-industrial cooperation model still cannot stand alone without the support of government. This study also pointed out that a having only a plan to build competitiveness of companies and universities for academic-industrial cooperation is not sufficient. Conclusions - In order to increase the competitiveness of academic-industrial cooperation, a detailed growth-sharing model for academic-industrial cooperation should be developed, and there should be more joint development processes for the advancement of such cooperation in which the need for technology development can be verified in advance. In addition, beyond focusing on technology-focused academic-industrial cooperation, a network between companies and universities searching for ideas for academic-industrial cooperation in the fields of human and social aspects should be created. A new academic-industrial model linking current cooperation between companies and universities to the local area should be built based on such academic-industrial cooperation in human and social fields.

• Management & Information Systems Review
• /
• v.28 no.1
• /
• pp.71-97
• /
• 2009

In this study, I compare the ability of alternative accounting method for employee stock option to reflect firm value using the Ohlson's(1995) valuation model for 200 firms. The each methods, I compare are employee stock option expense recognition based on the K-GAAP disclosures, and asset recognition at the grant date based on the SFAS No. 123 Exposure Draft: Accounting for stock-based compensation. The model include: (1) a model that uses reported earnings, equity book value, and compensation expense based on the K-GAAP disclosures; (2) a model that uses pro-forma earnings, equity book value and adds a measure of the unrecognized asset arising form granting of employee stock options. Finding form estimating equations that the K-GAAP method for calculating compensation has no explanatory power, and the SFAS No.123 Draft Exposure method for arising asset and fair value compensation better captures than market's perception of the economic impact of stock options on firm values. However, the correlation of employee stock option compensation expense is positive. These results suggest that incentive benefits derived from employee stock option plans outweigh the cost associated with plan. In addition, I couldn't find evidence that company in KOSDAQ that have high growth potential benefit more from employee stock option plan compared to lager, more mature firm in SEC.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.32-41
• /
• 2017

Accidents on offshore oil and gas platforms (OOGPs) usually cause serious fatalities and financial losses considering demanding environment platforms locate and complex topsides structure platforms own. Evacuation planning on platforms is usually challenging. The computational tool is a good choice to plan evacuation by emergency simulation. However, the complex structure of platforms and varied evacuation behaviors usually weaken the advantages of computational simulation. Therefore, this study developed a simulation model for OOGPs to evaluate different evacuation plans to improve evacuation performance by integrating building information modeling (BIM) and agent-based model (ABM). The developed model consists of four parts: evacuation model input, simulation environment modeling, agent definition, and simulation and comparison. Necessary platform information is extracted from BIM and then used to model simulation environment by integrating matrix model and network model. During agent definition, in addition to basic characteristics, environment sensing and dynamic escape path planning functions are also developed to improve simulation performance. An example OOGP BIM topsides with different emergent scenarios is used to illustrate the developed model. The results showed that the developed model can well simulate evacuation on OOGPs and improve evacuation performance. The developed model was also suggested to be applied to other industries such as the architecture, engineering, and construction industry.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.255-267
• /
• 2021

The purpose of this study is to present basic data for systematic and effective basic medical education by developing a flipped learning class design model using smart tools and verifying its validity. To this end, in this study, a model proposal was developed based on literature review, and its validity was verified through expert review and field application. In this study, as a flipped learning class design model using smart tools, RECIPE(R: Ready, E: Establish a Plan, C: Create and Connect Media, I: Into the Classroom, P: Process-focused Assessment, E: Evaluation) model was developed. This model is a model that enhances the learning effect by applying an appropriate smart tool at each stage of designing flipped learning. As a result of applying this model to the development of'Anatomy'and'Neuroscience'lectures in the first semester of 2019, students' interest and satisfaction are high, and it is proposed as a specialized model in the field of basic medicine. Therefore, the RECIPE model developed in this study can be applied to various basic medicine-related classes, and it is expected that students will be able to understand basic medicine through the design of the flipped learning class based on this.

• Journal of Korea Water Resources Association
• /
• v.41 no.11
• /
• pp.1153-1162
• /
• 2008

The use of radar rainfall for hydrological appraisal has been a challenge due to the limitations in raw data generation followed by the complex analysis needed to come up with precise data interpretation. In this study, RAIDOM (RAdar Image DigitalizatiOn Method) has been developed to convert synthetic radar CAPPI(Constant Altitude Plan Position Indicator) image data from Korea Meteorological Administration into digital format in order to come up with a more practical and useful radar image data. RAIDOM was used to examine a severe local rainstorm that occurred in July 2006 as well as two other separate events that caused heavy floods on both upper and mid parts of the HanRiver basin. A distributed model was developed based on the available radar rainfall data. The Flood Hydrograph simulation has been found consistent with actual values. The results show the potentials of RAIDOM and the distributed model as tools for flood prediction. Furthermore, these findings are expected to extend the usefulness of radar rainfall data in hydrological appraisal.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.6
• /
• pp.98-108
• /
• 2017

Recently, the development of middle and high-rise building technology using modular construction method has emphasized the importance of site construction error management. The modular construction method is very limited to adjust the construction error in the field because of the factory production characteristics. Therefore, in order to prevent the construction error in advance, a management plan reflecting the characteristics of the modular construction method is required, and it is important to make the decision of the construction participant at each stage. This study analyzed the factor of construction error of modular construction and suggested a decision support model for construction error management based on construction process. The result of this study is expected to be a guideline for the modular construction participant to derive the construction error management plan.

• Korean Journal of Health Education and Promotion
• /
• v.28 no.5
• /
• pp.145-160
• /
• 2011

Objectives: This study attempted to apply the Intervention mapping and Transtheoretical models to develop a program to promote moderate alcohol drinking in university students. Methods: Surveyed data from 1,137 university students were analyzed to identify personal and environmental determinants for alcohol drinking. Based on these determinants, program objectives were established. Crossing the objectives with related important determinants resulted in matrices of learning objectives for which educational strategies were developed. Subsequently, an intervention program were designed to achieve those objectives. Results: Identified personal determinants included awareness, attitudes, self-efficacy and behavioral skills. Environmental determinants were binge drinking behaviors of family members and peers, and social pressure for drinking. Program, impact and learning objectives were developed to change the identified determinants. Program activities included provision of information on positive and negative consequences of binge drinking, opportunities for assessing one's drinking pattern, increasing outcome expectancies of and skill building for monitoring drinking, resisting peer pressure and managing stress. To facilitate adoption and maintenance of the program, an intervention diffusion plan was suggested. An evaluation plan was developed by utilizing RE-AIM framework. Conclusions: In order to expand evidence bases for effective theory-based programs, the developed program should be tested in diverse university settings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5890-5896
• /
• 2013

This Study aimed at suggesting the plan for accumulating and utilizing schedule information of IFC file in BIM-based delivery system. For this Propose, First, literature review is conducted for analyzing utilization plan of schedule information and the IFC standard. Second, Schedule Planning process is analyzed to draw Schedule elements, and schedule information items is derived by analyzing schedule process and commercial software. Also, schedule elements in the IFC schema is derived by analyzing IFC schema through drawn schedule information. Finally, this study suggests a concept model accumulating and utilizing Schedule information included in IFC schema, and a conceptual delivery process of BIM model by analyzing BIM Application Guideline for Facility Project by PPS (Public Procurement Service) for accumulating IFC delivery files This study will expects to contribute to accumulate information of BIM model at the point of nationally introducing BIM.