• 천문학회보
• /
• 제44권2호
• /
• pp.75.1-75.1
• /
• 2019

We introduce a novel method for reconstructing the projected dark matter mass maps of merging galaxy clusters by applying the convolutional neural network (CNN) to their weak lensing maps. We generate synthesized grayscale images from given weak lensing maps that preserve their averaged galaxy ellipticity. We then apply them to multi-layered CNN with architectures of alternating convolution and trans-convolution filters to predict the mass maps. We train our architecture with 1,000 Subaru/Suprime-Cam mock weak lensing maps, and our method have better mass map prediction than the Kaiser-Squires method with the following three aspects: (1) better pixel-to-pixel correlation, (2) more accurate finding of density peak position, and (3) free from mass-sheet degeneracy. We also apply our method to the HST weak lensing map of the El Gordo cluster and compare our result to the previous studies.

• 한국멀티미디어학회논문지
• /
• 제19권3호
• /
• pp.633-641
• /
• 2016

Automatic defect inspection system is composed of the step in the pre-processing, defect candidate detection, and classification. Polarizing films containing various defects should be minimized over-detection for classifying defect blobs. In this paper, we propose a defect detection algorithm using a skewness of histogram for minimizing over-detection. In order to detect up defects with similar to background pixel, we are used the characteristics of the local region. And the real defect pixels are distinguished from the noise using the probability density function. Experimental results demonstrated the minimized over-detection by utilizing the artificial images and real polarizing film images.

• 대한전자공학회논문지
• /
• 제27권6호
• /
• pp.937-943
• /
• 1990

In this paper, a subband coding scheme using the human visual system(HVS) model for encoding monochrome images is proposed to produce perceptually higher quality images compared with the regular subband coding scheme. The proposed approach first transforms the intensity image to the density image by a point nonlinear transformation. A frequency band dexomposition of the density image is carried out by means of 2-D seaprable quadrature mirror filters, which split the density image spectrum into 16 equall rate subbands. Bits are allocated among the subbands to minimize the weighted mean squar error (WMSE) for differential pulse code modulation(DPCM) coding of the subbands. The weight for each subband is calculated from the modulation transfer function (MTF) of the HVS model at corresponding frequencies. The performances of the proposed approach are evaluated for 256 * 256 monochrome images at the bit rates of 0.5, 0.75 and 1.0 bita per pixel. Computer simulation results indicate that using the HVS model yields more pleasing reconstructed images than regular subband coding approach which does not use HVS model.

• 정보처리학회논문지A
• /
• 제9A권2호
• /
• pp.259-266
• /
• 2002

본 논문에서는 포맷 변환기를 사용하여 여러 가지 화상처리 필터링을 구현하였다. 이러한 설계 기법은 집적회로를 이용한 대규모 화소처리 배열을 근거로 하여 실현하였다. 집적구조의 두가지 형태는 연산병렬프로세서와 병렬 프로세스 DRAM(또는 SRAM) 셀로 분류할 수 시다. 1비트 논리의 설계 피치는 집적 구조에서의 고밀도 PE를 배열하기 위한 메모리 셀 피치와 동일하다. 이러한 포맷 변환기 설계는 효율적인 제어 경로 수행 능력을 가지고 있으며 하드웨어를 복잡하게 할 필요 없이 고급 기술로 사용 될 수 있다. 배열 명령어의 순차는 프로세스가 시작되기 전에 주 컴퓨터에 의해 생성이 되며 명령은 유니트 제어기에 저장이 된다. 주 컴퓨터는 프로세싱이 시작된 후에 저장된 명령어위치에서 시작하여 화소-병렬 동작을 처리하게 된다. 실험 결과 1) 단순한 평활화는 더 높은 공간의 주파수를 억제하면서 잡음을 감소시킬 뿐 아니라 에지를 흐리게 할 수 있으며, 2) 평활화와 분할 과정은 날카로운 에지를 보존하면서 잡음을 감소시키고, 3) 메디안 필터링기법은 화상 잡음을 줄이기 위해 적용될 수 있고 날카로운 에지는 유지하면서 스파이크 성분을 제거하고 화소 값에서 단조로운 변화를 유지 할 수 있었다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.44-49
• /
• 2020

One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.435-437
• /
• 1995

It is important to understand tile behaviours of tile high pressure DC glow discharge with a micro gap inside a pixel of the plasmas display panel. We prepared a narrow gap discharge system and have measured electron temperature and density by means of double probe methods in high pressure which was between 100torr and 200torr. And the electrode gap was 7mm. When the pressure varied from 100torr to 200torr, the negative glow was created at a distance less than 1mm from the cathode. And the length of the faraday dark space decreased from 8mm to 5mm. Hence probe measurements was mainly, performed in the region of the Faraday dark space. The dependence of electron temperature and density on the pressure and current density was same with that of the general flow discharge, i.e. as the pressure increased the electron temperature decreased and the density increased. But the spatial electron density distribution in the Faraday dark space was highly distorted because of the effect of high pressure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.54-63
• /
• 1993

Quantization error, generated by the quantization process of an image, is inherent in computer vision. Because, especially in stereo vision, the quantization error in a 2-D image results in position errors in the reconstructed 3-D scene, it is necessary to analyze it mathematically. In this paper, the analysis of the probability density function (pdf) of quantization error for a line-based stereo matching scheme is presented. We show that the theoretical pdf of quantization error in the reconstructed 3-D position information has more general form than the conventional analysis for pixel-based stereo matching schemes. Computer simulation is observed to surpport the theoretical distribution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.147-150
• /
• 2008

We have developed a 3.1-inch diagonal 2D/3D LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-quality 3D images. We have improved 3D visibility by broadening the 3D viewing zone where high-quality images can be seen, and we propose optical characterization methods which can evaluate the high-visibility autostereoscopic displays correctly.

• 정보처리학회논문지B
• /
• 제9B권3호
• /
• pp.311-318
• /
• 2002

문서영상 구조분석은 문서영상을 세부 영역으로 분할하는 과정과 분할된 영역을 문자, 그림, 표 등으로 분류하는 과정을 포함한다. 이 중 영역분류 과정에서 영역의 크기, 흑화소 밀도, 화소 분포의 복잡도는 영역을 분류하는 기준이 된다. 그러나 그림의 경우 이러한 기준들의 범위가 넓어 경계를 정하기 어려우므로 다른 형태에 비해 상대적으로 오분류의 비율이 높다. 본 논문에서는 그림과 문자를 분류하는 과정에서 영역의 크기, 흑화소 밀도, 화소 분포의 복잡도에 의한 영향을 줄이기 위하여 메디안 필터를 이용하고, 영역확장 필터(region expanding filter)와 제한 조건들을 이용하여 영역분류에서의 오분류를 수정함으로써 상용제품을 포함한 기존 방법에 비해 그림과 문자의 분류가 우수한 문서영상 구조 분석 방법을 제안한다.