• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.3-11
• /
• 2002

A moment-curvature relationship to simulate the behavior of reinforced concrete (RC) columns under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the unposed model takes into account the bond-slip effect by using a monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The pinching enact caused by axial force is considered with an assumption that the absorbing energy corresponding to any deformation level maintains constant regardless of the magnitude of applied axial force. The advantages of the proposed model, comparing tn layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures.. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed mood.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.462-469
• /
• 1982

Since 1962, varietal development and dissemination for summer upland crops have been actively initiated by the Crop Experiment Station, Office of Rural Development, Suweon, Korea. The major breeding objectives of soybeans have been to develop varieties which are early maturing, disease resistant, and adaptable to late planting for after-barley cropping. Development of eleven new soybean varieties including Hwangkeumkong, Jangyeobkong, Danyeobkong, and Kwangkyo has greatly increased the soybean yield throughout country. For com, after development of Hwangok #2, a synthetic, in early 1960's, nine corn hybrids-single crosses, double-crosses, and three-way crosses-such as Jecheon-ok, Hoengseong-ok, Kwangok, Suweon #19, etc., have been disseminated mainly to Kangweon province, a major corn producing area in Korea, and drew up the yield over 4 tons per hectare. The major breeding objectives of sweet potato have been to develop varieties which have high starch content and root yield. Hwangmi, Hongmi, and Shinmi are three sweet potato varieties developed and disseminated by the Crop Experiment Station, Office of Rural Development and are grown most widely in Korea. Most of researches on cultural practices of upland crops have begun on a full scale from early 1960's. In soybeans, for example, no fertilizer but for barley was applied although the effects of phosphate and potassium fertilizers were great on soybeans in after-barley soybean croppings. The effects of heavy application of phosphate and calcium fertilizers on soybeans in newly reclaimed soils were recognized. Recently a mixed fertilizer for soybean (N; 40, P:70, K:60 kg/㏊) was developed and sold for soybean growers. The optimum planting densities of 220, 000 plants/ha in full-season cropping and 330, 000 pts/ha in after-barley cropping of soybeans were known from repeated experiments. For higher yield, a means of cultural practices such as transplanting-pinching, direct planting-pinching, and hilling-up, etc., were developed along with barley-stubble planting with no tillage and integrated herbicide application for labour savings. For sweet potato, cultural practices for planting date, harvesting date, fertilizer, and planting density were fully established. For early marketing, a technique of vinyl-mulching on sweet potato has also fully developed. For com, planting density of 37, 000 pts/ha in early 1960's has been changed to 55, 000 pts/ha for grain production and 67, 000 pts/ha for silage. The amounts of fertilizers have also been changed from 120-120-120kg/ha (N-P-K) in early 1960s to 180-150-150 kg/ha. These increases in number of plants per unit area and fertilizer levels have resulted in greater production for both grain and silage. At the same time, the production techniques of F1 seeds have also improved.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.243-248
• /
• 2000

This study was conducted to evaluate the effects of weed control and lodging reduction in the cultivation of buckwheat. The effect of weed control was significant. In the herbicide plot, nevertheless, grain yield and plant height were more decreased than habitual and vinyl mulching plots. Therefore, the application of herbicide was considered unnecessary in buckwheat cultivation having short growth period. In the habitual plot, dominant weed species are Digitaria sanguinalis, Erigeron annuus, E. canadensis, Setaria viridis, and Stellaria alsine var. undulata. On the effect of plant dwarf agent, C.C.C. and TIBA, plant height became shorter than habitual plot but the grain yield decreased. The latter tip pinching time, the less in grain yield which indicate tip pinching is ineffective in grain yield and lodging reduction. Among the wild species and cultivars of Fagopyrum, F. urophyllum was differentiated into xylem and phloem tissues indicating woody plant. Stem hardness of this species was the hardest as 625,110,000 dyne/cm$^2$which is at least 3.5 times harder than F. esculentum cv. Suwon #12. Therefore, it needs that the woody habitat gene of F. urophyllum is transfered into other cultivars in buckwheat breeding strategy.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.5
• /
• pp.961-987
• /
• 2012

A compartment model of the flow driven by pumping without valves (valveless pumping) in an open tank system is proposed. By the open tank system, we mean that two rigid cylindrical tanks are connected with an elastic tube. An incompressible fluid fills this system up to a certain level in tanks under the gravity. The compartment model for analyzing such open system is derived from the energy principle which will be called the energy conserving compartment model or shortly the ECCM. Based on this ECCM of valveless pumping, we explore the occurrence of directional net flow or directional net power by a specific excitation at an asymmetric part of the elastic tube. The interaction between deformable elastic tube and the fluid inside is considered in the ECCM. The reliability of the ECCMis investigated through some physical examples. The ECCM shows the existence of directional net power of the valveless pump system with open tanks and confirms that the direction and magnitude of the net power depend on the pumping frequency as well. Furthermore, the phase synchronization in time between the fluid pressure difference and the external pinching force over the pumping region is highly related to the direction of energy storing or net power.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.951-951
• /
• 2005

The characteristics of Boussinesq starting forced plumes were investigated in this study. Two distinct periods in the transient plume penetration were identified, namely the Period of Flow Development (PFD) and Period of Developed Flow (PDF). PFD refers to the time period whereby the penetration rate is governed by the complex vortex dynamics initiated by the exit conditions that can include vortex coalescence, vortex leapfrogging, pinching off of the head vortex from the trailing stem and the eventual reconnection. The pinch-off and reconnection leads to an overshoot of the plume front which is a common observation reported in previous studies. The penetration rate in PDF is more predictable and depends on the continuous feeding of buoyancy and momentum into the head vortex by the trailing buoyant-jet stem. Similarity solutions are developed for PDF to describe the temporal variation of the penetration rate, by incorporating the behavior of an isolated buoyant vortex ring and recent laboratory results on the trailing buoyant jet. In particular, the variations of velocity ratios between the head vortex and trailing buoyant jet are analytically computed. To verify the similarity solutions, experiments were conducted on vertical starting forced plumes using planar laser induced fluorescence (PLIF).

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.180-189
• /
• 1994

An approximate method of normal coordinate idealization for use in nonlinear R /C frames has been developed. Normal coordinate apporaches have been used for nonlinear problems in the past, but they are not recerved wide acceptance because of the need for eigenvector computation in each time step. The proposed method circumvents the eigenvector recalculation problem by evaluating a limited number of sets of mode shapes in performing the dynamic analysis. Then some of the predetermined sets of eigenvectors are used in the nonlinear dynamic repeatedly. The method is applied to frame structures with ductile R /C elements. The plastic hinge zones are modeled with hysteres~s loops which evince degrading stiffness and pinching effects. Effxiencies and accuracies of the method for this application are presented.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.25-33
• /
• 2023

In this study, we determined the failure rate and fire status of electric motors widely used in domestic and industrial devices and analyzed the associated fire risks by identifying the electrical and temperature characteristics of electric motors under the normal and restrained operation modes in industrial sites and laboratories. A 2.2kW motor used for driving a conveyor during the vulcanization process in a rubber product manufacturing plant was employed as the study object and was exposed to a high- temperature environment as this motor is widely used in industrial sites. The current amplitude was 4.45-4.50 A during normal operation and 38.2-41.5 A during restrained operation due to the pinching of products and semi-finished products (i.e., 8.5 times higher than that during normal operation). The leakage current amplitude was 0.33 mA during both operation modes. The temperature of the workplace in summer was 42.38℃, indicating a poor environment for the installed motor. In the laboratory, the current and temperature of the coil inside a 3.7kW motor were measured under the restrained operation mode as performing measurements of the coil inside the motor in industrial sites is challenging. The current amplitude during normal operation was 3.5 A, whereas that during restrained operation for 30 s was 51.7-58.6 A, which is 14.8-16.7 times higher than that of normal operation. Moreover, the temperature of the motor coil increased from 22.9℃ to 101℃. Based on the experimental data, we derived the temperature increase formula according to the restrained operation time by performing a regression analysis and verified the time at which the temperature exceeded the stipulated limit for the insulation grade. The findings presented in this paper can be utilized to establish fire-prevention measures and perform safety management of motors of the same type or with a similar capacity.

• Archives of Plastic Surgery
• /
• v.43 no.2
• /
• pp.181-188
• /
• 2016

Background Major problems with cervicoplasty by direct skin excision include the subjective nature of skin markings preoperatively and the confusing array of procedures offered. This technique incorporates curved incisions, resulting in a wave-like scar, which is why the procedure is called a "wave-plasty". Methods This prospective study includes 37 patients who underwent wave-plasty procedures from 2004 to 2015. Skin pinching technique was used to mark the anterior neck preoperatively in a reproducible fashion. Intra-operatively, redundant skin was excised, along with excess fat when necessary, and closed to form a wave-shaped scar. Patients were asked to follow up at 1 week, 6 weeks, and 6 months after surgery. Results The mean operation time was 70.8 minutes. The majority (81.3%) was satisfied with their progress. On a scale of 1 to 10 (1 being the worst, and 10 being the best), the scars were objectively graded on average 5.5 when viewed from the front and 7.3 when seen from the side 6 months after surgery. Complications consisted of one partial wound dehiscence (2.3%), one incidence of hypertrophic scarring (2.3%), and two cases of under-resection requiring revision (5.4%). Conclusions In select patients, surgical rejuvenation of the neck may be obtained through wave-like incisions to remove redundant cervical skin when other options are not available. The technique is reproducible, easily teachable and carries low morbidity and high patient satisfaction in carefully chosen patients.

• Architectural research
• /
• v.19 no.3
• /
• pp.79-87
• /
• 2017

In earthquake engineering, dynamic analyses are usually conducted by using a nonlinear analytical model of the entire building in order to identify the performance against earthquakes. At the same time, a large number of dynamic analyses are required to consider uncertainties on analytical models and ground motions. Therefore, it is necessary for the analytical model to be adequate, that is to say, the runtime should not be too long as the entire building is modeled to be in much detail, or the nonlinear model should not yield outputs very far from the actual ones by excluding important behaviors too much. The analytical model is usually developed based on experimental results, which have been already conducted for reinforced concrete columns with relaxed details. Therefore, this study aimed at making analytical models to be able to simulate the hysteretic behavior of the columns simply and easily. The analytical model utilizes a lumped hinge model to represent nonlinear moment-rotation hysteretic behavior of RC columns, which is feasible for nonlinear dynamic analyses usually conducted in earthquake engineering and for matching the analytical model to test results. For the analytical model, elements and material models provided by OpenSees are utilized. The analytical model can define the envelope curve, pinching, and unloading stiffness deterioration, but shortcoming of this model is not to be able to consider axial force-moment interaction directly and to simulate strength deterioration after post-capping completely. However, the analytical model can still represent test results well by considering that the goal of this study is to propose a general way to represent the hysteretic behavior of RC columns with relaxed details, not to provide parameters for a refined hysteretic model that can be just applied case by case.

• Smart Structures and Systems
• /
• v.16 no.1
• /
• pp.163-181
• /
• 2015

This research investigates the structural health monitoring of nonlinear structures after a major seismic event. It considers the identification of flag-shaped or pinched hysteresis behavior in response to structures as a more general case of a normal hysteresis curve without pinching. The method is based on the overall least squares methods and the log likelihood ratio test. In particular, the structural response is divided into different loading and unloading sub-half cycles. The overall least squares analysis is first implemented to obtain the minimum residual mean square estimates of structural parameters for each sub-half cycle with the number of segments assumed. The log likelihood ratio test is used to assess the likelihood of these nonlinear segments being true representations in the presence of noise and model error. The resulting regression coefficients for identified segmented regression models are finally used to obtain stiffness, yielding deformation and energy dissipation parameters. The performance of the method is illustrated using a single degree of freedom system and a suite of 20 earthquake records. RMS noise of 5%, 10%, 15% and 20% is added to the response data to assess the robustness of the identification routine. The proposed method is computationally efficient and accurate in identifying the damage parameters within 10% average of the known values even with 20% added noise. The method requires no user input and could thus be automated and performed in real-time for each sub-half cycle, with results available effectively immediately after an event as well as during an event, if required.