• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.192-195
• /
• 1995

PZT powders were prepared by the molten salt synthesis method. The porous PZT was prepared from a mixture of PZT an polyvinylacohol(PVA) powders by BURPS(Burnout Plastic Sphere) technique. The piezolectirc and acoustic properties with various PVA wt% were studied, Piezoelectric coefficient d$\sub$33/ of porous PZT ceramics was almost same to that of single phase PZT ceramics, The thickness mode coupling factor k$\sub$t/ was 0.53~0.59 in comparable with the single phase PZT ceramics(k$\sub$t/=0.7)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.578-582
• /
• 2007

In this paper, vibration modes and frequencies of a ring-type stacked piezoelectric actuator for a wire bonding transducer system are analyzed using FEM simulations. We implement experiments using a commercial product model of the actuator PZT module which consists of 6 layer ring-type PZT and 7 electrodes, combined bolts, nut and tinut. There are two main results: One is that FEM analysis should consider the effect the harmonic voltage input in order to meet the experimental results. The other is that the current wire bonder using exciting frequency of 136 kHz should be modified in order to improve the actuator and bonding performance because the actuator module has the main longitudinal mode of 145 kHz.

• Smart Structures and Systems
• /
• v.11 no.2
• /
• pp.185-197
• /
• 2013

We developed a simultaneous strain measurement and damage detection technique using a pair of surface-mounted piezoelectric transducers and a fiber connecting them. This is a novel sensor configuration of the fiber acoustic wave (FAW) piezoelectric transducer. In this study, lead-zirconate-titanate (PZT) transducers are installed conventionally on a plate's surface, which is a technique used in many structural health monitoring studies. However, our PZTs are also connected with an optical fiber. A FAW and Lamb wave are simultaneously guided in the optical fiber and the structure, respectively. The dependency of the time-of-flight of the FAW on the applied strain is quantified for strain sensing. In our experimental results, the FAW exhibited excellent linear behavior and no hysteresis with respect to the change in strain. On the other hand, the well-known damage detection function of the surface-mounted PZT transducers was still available by monitoring the waveform change in the conventional Lamb wave ultrasonic path.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.585-596
• /
• 2012

PVDF(poly vinylidene fluoride) and P(VDF-TrFE)(poly vinylidene fluoride-tetrafluoroethylene) are the typical piezoelectric polymers with unique properties. Even they are inferior to conventional piezoelectric ceramics PZT in electromechanical conversion efficiency and interior loss, though they are superior in receiving sensitivity and frequency bandwidth. Their acoustic impedances are relatively close to water or biological tissue and it is easier to make thin film than other piezoelectric materials. Futhermore, the film is so flexible that it is easy to attach on a complex surface. Those properties are suitable for the ultrasound transducers which are useful for medical and biological application, so that various types of polymer transducers have been developed. In this paper, several important considerations for design and fabrication of piezoelectric polymer transducers were described and their effect on the transducer performance were demonstrated through the KLM model analysis. Then, it was briefly reviewed about the structures of the polymer transducers developed for obtaining images as well as the characteristics of the images in several important medical and biological application fields.

• Journal of Biomedical Engineering Research
• /
• v.43 no.5
• /
• pp.319-330
• /
• 2022

In this study, the optimal driving frequency was derived through finite element analysis (FEA) to optimize the developed piezoelectric ultrasonic medical devices(PUMD) for bone surgery. The core of the PUMD is the piezoelectric ceramic (PZT), which is a vibrator that generates vibration energy. The piezoelectric ceramic shows the maximum current value with respect to the input voltage at the resonance frequency, which generates the maximum mechanical vibration. In the past, various studies have been conducted related to the analysis of PUMD, but most of the research so far has been limited to free vibration analysis. However, in order to derive the accurate resonant frequency, the initial stress generated by bolt tightening in the bolt-clamped Langevin type transducer (BLT) must be considered. In this study, after designing a PUMD, the driving performance according to the bolt tightening value was analyzed through FEA, and this was experimentally verified. First, the resonance mode and frequency response were confirmed through modal and harmonic analysis at 20-40 kHz, which is known as the optimal driving frequency band of PUMD for bone surgery. In addition, the design of the PUMD was confirmed by checking the mechanical behavior of the tip and the piezoelectric ceramic at the resonant frequency. Consequentially, the characteristic evaluation was performed, and it was confirmed that the resonant frequency result derived through the FEA was reasonable. Through this study, we presented a more rational FEA method than before for BLT transducers. We expect that this will shorten the time and cost of developing a PUMD, and will enable the development of more stable and high-quality products.

• Electrical & Electronic Materials
• /
• v.2 no.1
• /
• pp.14-24
• /
• 1989

본 연구에서는 1-3형 PZT/Epoxy 압전복합재료를 제조하고 이에 대한 D-E 곡선, 펄스응답특성 및 유중발생전압특성 등을 조사하였다. 압전복합재료의 음향임피던스는 PZT체적비가 증가함에 따라 비례적으로 증가하였다. 그리고 펄스응답특성은 단일상 PZT의 특성에 비하여 아주 양호하게 나타났으며 PZT 체적비가 40% 이상에서는 펄스응답특성이 거의 일정하게 되었다. 유중에서의 발생전압은 PZT체적비, 시편두께 그리고 유중압력이 증가함에 따란 비례적으로 증가하였다. 이들의 결과는 초음파 트랜스듀서 제작에 좋은 자료가 될 것으로 생각한다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.214-221
• /
• 2004

We theoretically and experimentally investigate the effect of apodization on the transmission characteristics of linearly chirped fiber Bragg gratings(CFBGs). Based on the UV beam scanning method along a phase mask, we fabricated several apodized CFBGs with different apodization profiles such as Gaussian, Raised-cosine, Blackman, and Hyperbolic tangent. During the UV beam scanning, the phase mask is dithered by a PZT(Piezoelectric transducer) which is precisely controlled by a computer program so that the apodization profiles can be flexibly applied to the grating. We measured the reflection spectra and group delay characteristics of CFBGs with the different apodization profiles, and compared them according to their properties such as reflectivity, sidelobes, and group delay ripple (GDR). The peak-to-peak of GDR could be suppressed to less than 20 ps.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.240-244
• /
• 1998

Cavity ring-down spectroscopy (CRDS) is a high-sensitive laser spectroscopic technique capable of measuring concentrations of trace gases. We have demonstrated a new design of the CRDS spectrometer with a continuous wave (CW) laser. The ring-dwon signal is produced through blocking the incident CW laser by scanning the cavity length fast toward off-resonance iwth PZT (piezoelectric transducer). We have also measured an absorption spectrum of acetylene overtone transitions near 570 nm at the pressure of 2700 Pa, and the minimum detectable absorption coefficient has been found to be about $3{\times}10^{-9}\cm^{-1}$.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.159-164
• /
• 2006

We demonstrate a compact optical coherence tomography(OCT) system based on the optical fiber delay line controlled by a cylindrical piezo-electric transducer(PZT). An 18-m length of single mode fiber is wrapped under constant tension around a PZT. Approximately 134 windings are used. Wraps of the long length of fiber allow the small expansion of the PZT to be magnified to an optical path length delay of 0.78 m. The OCT system shows characteristics for 2-dimensional imaging, exhibiting 96.9dB of signal-to-noise ratio(SNR), $18.6{\pm}0.5\;{\mu}m$ of axial resolution, and $5\;{\mu}m$ of lateral resolution with samples.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.524-529
• /
• 2004

Recently High precision positioning device is used in many kinds of manufacturing and scientific instruments. Piezoelectric transducer is applied to the positioning devive as actuator, PZT has a high resolution, however, moving range is short. Many researcher have developed the mechanism for increasing a motion range. The types of increasing motion range mechanism with PZT are inertial slider, friction driver, ultrasonic motor, etc. In this paper we discuss the review of the hish precision actuator mechanism with PZT. Many kinds of mechanism for high precision are shown and compared.