• 한국광학회지
• /
• 제16권3호
• /
• pp.225-234
• /
• 2005

3차원 영상 재생을 위한 집적결상법에서 픽업시 기본영상의 크기는 기본렌즈 크기, 기본렌즈와 기본영상 사이의 간격 등 몇 가지 변수들과 일정한 관계를 갖는다. 이 기하학적 관계들을 분석하고, 기본영상의 크기 및 거리가 픽업시와 다른 경우 기본영상의 배열이나 개별적인 크기 변환에 의해 재생되는 3차원영상의 특성변화를 이론적으로 분석하고 실험을 통해 확인하였다.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.69-74
• /
• 2007

This paper is concerned about the dynamic analysis of an underwater test miner, which operates on cohesive soil. The test miner consists of tracked vehicles and a pick-up device. The motion of the pick-up device, relative to the vehicle chassis, is controlled by two pairs of hydraulic cylinders. The test miner is modeled by means of commercial software. A terramechanics model of cohesive soft soil is implemented with the software and applied to a dynamic analysis of the test miner model. The dynamic responses of the test miner are studied with respect to four different types of terrain conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2263-2265
• /
• 2000

본 연구에서는 광 픽업의 소형, 경량 제작을 위해 MEMS 기술을 이용하여 planar micro optics 방법으로 광 픽업을 구성하는 micro lens, actuator, beamsplitter 등을 설계, 제작하고 집적화한 픽업헤드를 구성하여 그 특성을 분석하였다. 특성분석 결과 disk에 focusing 되는 beam의 형상은 circle type의 비교적 양호한 결과를 얻을 수 있었고 beam spot size는 약 22$\mu m$로 실제 system에서 요구되는 0.9$\mu m$이내의 beam spot size에 비해 약 25배 가량 큰 beam spot size를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.9-11
• /
• 1995

In order to achieve a essential requirement for the driving system of electric vehicles, that is, starting pick-up ability, a wound-type induction motor with double-rotor structure is proposed. Slip Power Recovery system is adopted to improve the efficiency in the low speed range and to control speed of this system. Theoretical analysis and experimental results from 300[W] prototype motor is presented to verify the improvement of pick-up ability and high-efficiency driving characteristics through the wide speed range, especially under the low speed range.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.47-50
• /
• 2005

In this study, micro mirror array for small form factor optical pick-up was replicated by micro UV-molding. First, mold for micro mirror array was fabricated using micromachining. Also, to analyze the characteristics of the surface quality, flatness of replicated mirror surface were measured by white light scanning inteferometry system. The results show that the micro mirror array with a sufficient surface quality can be obtained by polymer replication process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.438-444
• /
• 1997

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD-ROM drives. To this end, improvement of their optical pick-up structure and control is recognized the very challenging issue. In this paper, the 2-D motion of the pick-up is first analytically modelled to identify the cause and effect of the troublesome cross coupling between auto-focusing and tracking directions. Subsequently, the overall system equations are derived to include the dynamics of the related components in the auto-focusing servo system. While its unmeasurable parameters being estimated by the least square error method, a simple but decent linear model can be obtained within its operating frequency range. To design the high speed and robust positional servo controller, the design specifications are detailed and H$\sub$.inf./ control method is employed based on the simple model. Using the pickup in a commercial 8 fold speed CD-ROM drive as an example, performance of the designed controller is verified by realtime experiments.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권1호
• /
• pp.1-5
• /
• 2023

The study of two-dimensional electron systems with extraordinarily low levels of disorder was, for a long time, the exclusive privilege of the epitaxial thin film research community. However, the successful isolation of graphene by mechanical exfoliation has truly disrupted this field. Furthermore, the assembly of heterostructures consisting of several layers of different 2D materials in arbitrary order by exploiting van der Waals forces has been a game-changer in the field of low-dimensional physics. This technique can be generalized to the large class of strictly 2D materials and offers unprecedented parameters to play with in order to tune electronic and other properties. It has led to a paradigm shift in the field of 2D condensed matter physics with bright prospects. In this review article, we discuss three device fabrication techniques towards high mobility devices: suspended structures, dry transfer, and pick-up transfer methods. We also address state-of-the-art device structures, which are fabricated by the van der Waals pick-up transfer method. Finally, we briefly introduce correlated ground states in the fractional quantum Hall regime.

• 한국동물위생학회지
• /
• 제44권4호
• /
• pp.227-237
• /
• 2021

Artificial insemination of Korean native cattle (KNC) is the predominant method for breed improvement. However, industrialization of embryo production and transfer is necessary to utilize the genetic potential of KNC. The aim of this study was to examine associations between KNC donor cows and ovum pick-up (OPU) conditions, in-vivo oocyte recovery, and embryo development. Oocyte recovery and blastocyst development rates were higher at 50 and 60 mmHg OPU vacuum pressure than at 40 mmHg, which was, however, not significant. Regarding follicle growth, injection of 500 ㎍ GnRH 36 hours before OPU significantly increased the number of OPU oocytes from an average of 4.6 to 7.6 (P<0.05); no significant difference in embryo development rates was observed. Significant differences were observed in the numbers of OPU oocytes, embryo development rates, and transplantable blastocysts per individual among nine KNC donors (P<0.05). Furthermore, although there was no difference in OPU oocyte recovery intervals in approximately 2~8 weeks, the number of recovered oocytes significantly decreased at the 12-week interval (P<0.05); there was no difference in embryo development rates. The number of oocytes and embryonic development rates only tended to decrease until the seventh OPU session, but decreased significantly until the eighth session (P<0.05). The average pregnancy rate after transfer of OPU-derived in-vitro embryos into recipient cows was 41.8%. To improve the efficiency of OPU egg recovery and in-vitro embryo production, considering KNC donor characteristics, vacuum pressure of 60 mmHg, GnRH pretreatment to induce follicle growth, and effective OPU egg recovery up to seven times at intervals of 2~4 weeks appears to be most suitable. This study may facilitate the industrialization of KNC embryo production and transfer using high-quality cows.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2001년도 하계 학술대회 논문집
• /
• pp.21-26
• /
• 2001

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.14-15
• /
• 2004