• Journal of information and communication convergence engineering
• /
• 제19권3호
• /
• pp.136-141
• /
• 2021

Research on wireless sensor networks has focused on the monitoring and characterization of large-scale physical environments and the tracking of various environmental or physical conditions, such as temperature, pressure, and wind speed. We propose a stochastic mobility model that can be applied to a MANET (Mobile Ad-hoc NETwork). environment, and apply this mobility model to a newly proposed clustering-based routing protocol. To verify its stability and durability, we compared the proposed stochastic mobility model with a random model in terms of energy efficiency. The FND (First Node Dead) was measured and compared to verify the performance of the newly designed protocol. In this paper, we describe the proposed mobility model, quantify the changes to the mobile environment, and detail the selection of cluster heads and clusters formed using a fuzzy inference system. After the clusters are configured, the collected data are sent to a base station. Studies on clustering-based routing protocols and stochastic mobility models for MANET applications have shown that these strategies improve the energy efficiency of a network.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1867-1872
• /
• 2018

This study proposes a route for surface modification for p-type cobalt oxide-based gas sensors. We deposit a thin layer of Ni on the Co oxide film by sputtering process and annealed at $350^{\circ}C$ for 15 min in air, which changes a typical sputtered film surface into one interlaced with a high density of hemispherical nanoparticles. Our in-depth materials characterization using transmission electron microscopy discloses that the microstructure evolution is the result of an extensive inter-diffusion of Co and Ni, and that the nanoparticles are nickel oxide dissolving some Co. Sensor performance measurement unfolds that the surface modification results in a significant sensitivity enhancement, nearly 200% increase for toluene (at $250^{\circ}C$) and CO (at $200^{\circ}C$) gases in comparison with the undoped samples.

• Advances in nano research
• /
• 제13권5호
• /
• pp.437-451
• /
• 2022

Synthesis approaches usually affect the physical and chemical properties of ferrites. This helps ferrite materials to design them for desired applications. Some of these methods are mechanical milling, ultrasonic method, micro-emulsion, co-precipitation, thermal decomposition, hydrothermal, microwave-assisted, sol-gel, etc. These methods are extensively reviewed by taking example of ZnFe₂O₄. These methods also affect the microstructure and local structure of ferrite which ultimately affect the physical and chemical properties of ferrites. Various spectroscopic techniques such as Raman spectroscopy, Fourier Transform Infrared spectroscopy, Ultra Violet-Visible spectroscopy, Mossbauer spectroscopy, extended x-ray absorption fine structure, and electron paramagnetic resonance are found helpful to reveal this information. Hence, the basic principle and the usefulness of these techniques to find out appropriate information in ZnFe₂O₄ nanoparticles is elaborated in this review.

• PNF and Movement
• /
• 제11권1호
• /
• pp.27-33
• /
• 2013

Purpose : The purpose of this research was to research on Needs for the Construction of the CSFT(Cluster with a Strongpoint for Field Training) on students and professors of health-related majors. Methods : We investigated 164 students and professors using a self-reporting method with experience of Field Training. A statistical analysis was performed using SPSS 17.0 for window version. Results : It showed that educational satisfaction had scored 4.05 in curriculum, 4.00 in environment, 3.52 in schedule, 3.71 in evaluation and 3.71 in teaching and 3.84 in industrial-college systems for Field Training. Needs for the Construction of the CSFT had scored 4.17 in $mean{\pm}standard$ deviation. Conclusion : Characterization of Nursing, Department of Health and local health care environment and conditions, if you think the quality of education for the Department of Health Nursing, gradually, the acquisition and improvement of the base hospital is necessary. Therefore, it is considered to be institutionalized by installing the strongpoint hospital at least one in each region, so that they can contribute to the improvement of people's health.

• 대한화학회지
• /
• 제54권1호
• /
• pp.105-109
• /
• 2010

Propylene glycol을 첨가제로 사용하여 HEMA (2-hydroxyethyl methacrylate)와 교차결합제인 EGDMA (ethylene glycol dimethacrylate) 그리고 개시제인 AIBN(azobisisobutyronitrile)을 사용하여 공중합 하였다. 생성된 고분자의 물리적 특성을 측정한 결과, 함수율 37.06~38.71%, 굴절률 1.492~1.432, 가시광선 투과율 89.4~91.5%, 인장강도 0.1416~0.2302 kgf 그리고 접촉각의 경우 $38.60{\sim}53.53^{\circ}$ 범위의 분포를 나타내었다. 따라서 propylene glycol을 첨가한 콘택트렌즈 재료의 경우, 기본적인 콘택트렌즈의 물성을 만족하였으며 함수율의 큰 변화를 나타내지 않으면서도 습윤성과 인장강도를 증가시키는 결과를 보여주었다.

• Journal of Microbiology and Biotechnology
• /
• 제4권1호
• /
• pp.36-40
• /
• 1994

A water sample was taken from a black smoker chimney of a deep-sea hydrothermal vent by using an unmanned submersible "Dolphin 3K". The temperature of the hydrothermal fluid from the black smoker was $276^{\circ}C$. After isolation by repeated serial dilutions, An extremely thermophilic bacterial strain was selected. The strain designated as DT1331, was an anaerobic, non-motile, coccoid shaped bacterium with about 0.5 to $1.0\;\mu\textrm{m}$ in diameter. The strain DT1331 could grow up to $93^{\circ}C$, but the optimum temperature of this strain was $80^{\circ}C$. The growth occurred in the pH range of 4.5 to 8.5 and the optimum pH was 6.0. The strain DT1331 required 1% to 5% NaCl for growth and cell lysis was observed below 1% NaCl concentration. The bacterium could grow on polypeptides such as tryptone, peptone, soytone and on proteins such as casein or gelatin. However, no growth was observed on single amino acids, sugar and organic acids. Hydrogen gas was detected slightly during growth. This bacterium obligately required elemental sulfur and hydrogen sulfide gas was produced during growth.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.69-82
• /
• 1992

An experimental investigation of the physical properties of light curing composite resin P-50 was performed, in which an argon ion laser beam was irradiated. The physical and mechanical properties of laser polymerized composite resin were determined by measuring the compressive strength, diametral tensile strength, curing depth and microhardness depending upon the experimental conditions such as the laser irradiation time(10sec, 20sec, 30sec) and laser power(300mW, 500mW, 1000mW). These observations were compared with a conventional visible light curing technique. In addition, to evaluate the marginal adaptation, Class V cavity was prepared on the buccal or lingual surface of the extracted premolar and filled with P-50 light curing resin. The test samples were irradiated with both light sources so that the interface between the restoration and the tooth structure were observed under scanning electron microscope. The most of physical and mechanical properties of the laser cured resin showed a remarkable improvement than those treated with the conventional light source, while the observations with the scanning electron microscope provided no significant difference for two polymerized sources. From the results in the experiment it appears that the potential of an argon ion laser is of important value of the use in the polymerization of composite resin.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1351-1355
• /
• 2018

The photocurrent characteristics of zinc-oxide (ZnO) thin-film transistors (TFTs) prepared using radio-frequency sputtering and spin-coating methods were investigated. Various characterization methods were used to compare the physical and the chemical properties of the sputtered and the spin-coated ZnO films. X-ray photoelectron spectroscopy was used to investigate the chemical composition and state of the ZnO films. The transmittance and the optical band gap were measured by using UV-vis spectrometry. The crystal structures of the prepared ZnO films were examined by using an X-ray diffractometer, and the surfaces of the films were investigated by using scanning electron microscopy. ZnO TFTs were prepared using both sputter and solution processes, both of which showed photocurrent characteristics when illuminated by light. The sputtered ZnO TFTs had a photoresponsivity of 3.08 mA/W under illumination with 405-nm light while the solution-processed ZnO TFTs had a photoresponsivity of 5.56 mA/W. This study provides useful information for the development of optoelectronics based on ZnO.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3121-3125
• /
• 2023

Neutron conversion detectors that use ¹⁰B-enriched boron carbide are feasible alternatives to ³He-based detectors. We prepared boron carbide films at micron-scale thickness using direct-current magnetron sputtering. The structural characteristics of natural B₄C films, including density, roughness, crystallization, and purity, were analyzed using grazing incidence X-ray reflectivity, X-ray diffraction, X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, and scanning electron microscopy. A beam profile test was conducted to verify the practicality of the ¹⁰B-enriched B₄C neutron conversion layer. A clear profile indicated the high quality of the neutron conversion of the boron carbide layer.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.395-402
• /
• 2009

원자힘현미경은 초미세크기의 물리적 특성을 규명하기 위한 수단으로서 지지 지질층의 물리적특성 규명에 이용되어 왔다. 원자힘현미경이 출현하기 이전에는 초미세관점에서 지지 지질층에서 발생하는 물리적 현상의 관찰이 전무하였다. 이 현미경은 탐침바늘(Cantilever)로 표면을 주사(Scanning)함으로써 표면의 초미세 형상(Morphology)을 제공하고 표면에 접근(Approach)했다가 후퇴(Retraction)하는 탐침바늘의 거동을 모니터링함으로써 힘곡선(Force Curve)을 나타낼 수 있다. 형상 파악을 통해 지지 지질층의 구조와 막 단백질이 지질층의 구조에 미치는 영향을 밝히는 연구가 진행되어 왔으며, 힘곡선을 통하여 지지 지질층 표면 특성-기계적 정전기적 특성-에 대한 연구가 진행되었다. 본 총설에서는 원자힘현미경을 이용하여 현재까지 진행된 지지 지질층의 구조와 표면 특성 연구에 대하여 소개하고 향후 연구 진행 방향에 대하여 논의하고자 한다.