• 대한화학회지
• /
• 제33권1호
• /
• pp.11-17
• /
• 1989

피라지니움염인 피라지니움 크로로크로메이트와 디피라지니움 트리크로로메이트는 HCl용액과 $CH_2Cl_2$용액에 피라진을 각각 녹이고 거기에 CrO$_3$ 를 가하므로 얻었다. 이들 화합물은 모두 비흡수성이나 물에 잘 녹었다. 이들 화합물의 물리적 특성으로 용해도, pH, 전기전도도, 용융점 등을 측정하였다. 이들 화합물은 전기 전도도 측정으로 $C_4H_4N_2H^+$, $CrO_3Cl^-$, $Cr_3O^{2-}_{10}$ 이온 등으로 용액 내에 존재하는 것을 알 수 있었다. 또한 DTA에 의해 염의 첫번째 분해시에 CrO$_3$ 가 분리되고 두번째 분해시에는 $Cr_2O_3$로 변해지고 이때 무게가 감소됨을 알 수 있었다. 특히 동일한 조건하에서 디피라지니움 염은 피리딘으로부터 얻어진 $Cr_2O^{2-}_{7}$의 형태로 존재하리라 예측했던 것이 이소폴리의 형태로 존재함을 알 수 있었다.

• 농업과학연구
• /
• 제48권4호
• /
• pp.891-897
• /
• 2021

There is a need for a technology that can quickly and accurately analyze soil carbon contents. Existing soil carbon analysis methods are cumbersome in terms of professional manpower requirements, time, and cost. It is against this background that the present study leverages the soil physical properties of color and water content levels to develop a model capable of predicting the carbon content of soil sample. To predict the total carbon content of soil, the RGB values, water content of the soil, and lux levels were analyzed and used as statistical data. However, when R, G, and B with high correlations were all included in a multiple regression analysis as independent variables, a high level of multicollinearity was noted and G was thus excluded from the model. The estimates showed that the estimation coefficients for all independent variables were statistically significant at a significance level of 1%. The elastic values of R and B for the soil carbon content, which are of major interest in this study, were -2.90 and 1.47, respectively, showing that a 1% increase in the R value was correlated with a 2.90% decrease in the carbon content, whereas a 1% increase in the B value tallied with a 1.47% increase in the carbon content. Coefficient of determination (R²), root mean square error (RMSE), and mean absolute percentage error (MAPE) methods were used for regression verification, and calibration samples showed higher accuracy than the validation samples in terms of R² and MAPE.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.23-29
• /
• 2016

육방정계 우르자이츠형의 산화아연은 n형 반도체로써 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 큰 엑시톤 바인딩 에너지를 가진 물질이다. 가스센서, 발광 다이오드, 염료 감응 태양 전지, 염료오염의 분해 등의 넓은 범위에서 활용이 가능하다. 합성 시 마이크로파 수열합성법을 사용하게 되면 높은 수율, 빠른 반응속도, 에너지 절약의 장점이 있다. 아민첨가제는 수산이온 생성 및 킬레이트 효과로 인해 산화아연 입자 형상을 조정하는 역할을 한다. 본 논문에서는 전구체로는 질산아연육수화물을 사용하였고, 형상조정제로는 에탄올아민, 에틸렌디아민, 디에틸렌트리아민, 헥사메틸렌테트라민을 사용하였다. 수산화소듐을 사용하여 용액을 pH 11로 조정하였다. 합성된 산화아연은 별모양, 막대형, 꽃모양, 원추형의 다양한 형상을 확인할 수 있었다. 아민첨가제에 의한 물리 화학적 특성과 광학적 특성을 분석하기 위해 XRD, SEM, EDS, FT-IR, UV-vis 스펙트럼, PL 스펙트럼을 사용하였다.

• 공업화학
• /
• 제22권5호
• /
• pp.467-472
• /
• 2011

본 연구에서는 천연물을 이용한 기능성 섬유를 제조하기 위하여 미처리 및 불소화 일라이트를 첨가하여 일라이트/PP 복합섬유를 용융방사로 제조하고 그 물리적 특성을 고찰하였다. 복합필라멘트 형성 시 층상구조를 가지는 일라이트의 윤활특성으로 순수 PP 필라멘트에 비해 복합필라멘트의 직경이 감소하는 현상이 나타났으며, 불소화의 효과로 인한 계면 친화성 향상 및 분산성 향상으로 불소화 일라이트/PP 복합필라멘트의 직경이 순수 PP 필라멘트의 2/3 정도로 감소하였다. 미처리 및 불소화 일라이트 모두 일라이트/PP 복합필라멘트의 열안정성을 향상시키는 효과가 있는 것으로 확인되었다. 또한, 미처리 일라이트/PP 복합필라멘트는 연신 공정을 거칠 때 절사가 발생하여, 복합섬유로서 활용될 수 없었으나, 불소화 일라이트/PP 복합필라멘트는 연신 후 순수 PP 필라멘트와 비슷한 인장강도를 가지고, 50% 정도 증가한 탄성률을 가지는 것으로 보아 복합섬유로서 사용될 수 있음을 확인할 수 있었다. 일라이트/PP 복합필라멘트를 형성 시, 불소화를 통하여 일라이트/PP간의 계면 친화성이 향상되고 고분자 내 분산성은 향상이 되었으나, 층간 결합력이 강한 비팽윤성 일라이트 고유의 성질로 인하여 일라이트의 박리나 PP의 일라이트 내 층간삽입이 충분히 발생하지 않은 것으로 보아 나노복합체가 아닌 마이크로 복합체를 형성하는 것으로 여겨진다.

• 농업과학연구
• /
• 제42권3호
• /
• pp.191-199
• /
• 2015

We conducted this research to observe the changes of surface morphology and composition of clay minerals influenced by various concentrations of fluoric acid. Hydrofluoric acid (HA), a solution of hydrogen fluoride (HF) in water, is a colourless solution that is highly corrosive, capable of dissolving many materials, especially oxides. To do this, we treated several concentrations of HA on the ground soil samples collected from the agricultural experimental station located at Chungnam National University to observe the influence of fluoric acid on the changes of surface structures and elemental composition of clay particles. Generally, microscopic examination showed that the HA can not only attack an edge of clay particles but also start at any point where structural defects and weaknesses predisposed sites to acid. The orderly flake arrangement of clay minerals may reflect certain crystal symmetry elements. The ESEM-EDS results of element composition of clay particles influenced by HA indicated the changes of structures of clay minerals. It is also clear from the formation of etch figures and element composition of clay particles that the product layer at least partially dissolved or disintegrated in the presence of acid. Conclusively, the clay structures can be strongly influenced by concentrations of HA, resulting in changes of physical and chemical properties that can determine the behavior of solute transport as well as mobility of ions in soils.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.256-260
• /
• 1994

Perovskite type oxides of the $Sr_xHo_{1-x}FeO_{3-y}$ system with compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been prepared at 1200$^{\circ}$C in air. X-ray powder diffraction assigns the compositions with x=0.00 and 0.25 to the orthorhombic crystal system and those with x=0.50, 0.75, and 1.00 to the cubic one. The unit cell volumes of solid solutions increase with x in the system. Nonstoichiometric chemical formulas were determined by Mohr salt titration. The mole ratio of $Fe^{4+}$ ions to total iron ions and the concentration of oxygen ion vacancies increase with x. Mossbauer spectra for the compositions of x= 0.00, 0.25, and 0.50 show six lines indicating the presence of $Fe^{3+}$ ions in the octahedral site. However, the presence of $Fe^{4+}$ ions may also be detected in the spectra for the compositions with x=0.25 and x=0.50. In the compositions with x=0.75 and 1.00, single line patterns show also the mixed valence state of $Fe^{3+}$ and $Fe^{4+}$ ions. The electrical conductivity in the temperature range of -100$^{\circ}$C to 100$^{\circ}$C under atmospheric air pressure increases sharply with x but the activation energy decreases with the mole ratio of $Fe^{4+}$ ion. The conduction mechanism of the perovskite system seems to be hopping of the conduction electrons between the mixed valence iron ions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 1999

Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.

• 공업화학
• /
• 제30권5호
• /
• pp.597-605
• /
• 2019

수용성 접착제의 접착력을 향상시키기 위해 제미니형 비이온 반응성 계면활성제를 합성하여 수계 접착제에 적용하였다. 제미니형 비이온 반응성 계면활성제는 말레산 및 에틸렌옥사이드의 부가몰수가 다른 폴리 옥시 에틸렌 세틸 에테르를 사용하여 합성하였다. 합성된 계면활성제는 FT-IR 및 $^1H-NMR$에 의해 확인되었다. 합성된 화합물은 밝은 노란색 왁스의 형상이었고, 화합물의 운점은 $78^{\circ}C$ 이상이었다. 측정된 임계 미셀 농도(c.m.c)는 $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$이었고 표면장력은 25.9~32.0 mN/m이었다. 에틸렌옥사이드의 부가몰수가 증가함에 따라 유화력이 향상되었다. Ross-Miles 법에 의한 화합물의 발포 높이는 1.4~4.5 cm이었다. 본 연구에서 합성된 계면활성제는 수성 접착제의 유화 중합에서 유화제로 사용되었으며 그 물성을 평가하였다. 준비된 접착제의 고체 함량은 59%이었다. 접착제의 평균입자크기는 164~297 nm이었다. 접착제의 초기 점착성의 볼 번호는 20~32이었으며, 박리 강도는 $1.8{\sim}2.1kg_f/mm$이었다. 점도 유지율은 30 days 동안 99%로 확인되었다. 합성된 제미니형 비이온 반응성 계면활성제는 점착력을 위한 유화제로 사용될 것으로 기대된다.

• Journal of Information Display
• /
• 제12권3호
• /
• pp.145-152
• /
• 2011

Since the discovery of fullerenes as a class of nanostructure compounds, many potential applications have been suggested for their unusual structures and properties. The isolated pentagon rule (IPR) states that all pentagonal carbon rings are isolated in the most stable fullerene. Fullerenes $C_n$ are a class of spherical carbon allotrope group with unique properties. Electron transfer between fullerenes and other molecules is thought to involve the transfer of electrons between the molecules surrounding the fullerene cage. One class of electron transfer molecules is the methanofullerene derivatives ([6,6]-phenyl $C_{61}$-butyric acid methyl ester (PCBM), 4-(2-ethylhexyloxy)-[6,6]-phenyl $C_{61}$-butyric acid methyl ester (p-EHO-PCBM), and 4-(2-ethylhexyloxy)-[6,6]-phenyl $C_{61}$-butyric acid (p-EHO-PCBA), 10-12). It has been determined that $C_{60}$ does not obey IPR. Supramolecular complexes 1-9 and 10-12 are shown to possess a previously unreported host.guest interaction for electron transfer processes. The unsaturated, cis-geometry, thiocrown ethers, (1-9) (described as [X-UT-Y], where X and Y indicate the numbers of carbon and sulfur atoms, respectively), are a group of crown ethers that display interesting physiochemical properties in the light of their conformational restriction compared with a corresponding saturated system, as well as the sizes of their cavities. Topological indices have been successfully used to construct mathematical methods that relate structural data to various chemical and physical properties. To establish a good relationship between the structures of 1-9 with 10-12, a new index is introduced, ${\mu}_{cs}$. This index is the ratio of the sum of the number of carbon atoms ($n_c$) and the number of sulfur atoms ($n_s$) to the product of these two numbers for 1-9. In this study, the relationships between this index and oxidation potential ($^{ox}E_1$) of 1-9, as well as the first to third free energies of electron transfer (${\Delta}G_{et(n)}$, for n = 1-3, which is given by the Rehm-Weller equation) between 1-9 and PCBM, p-EHO-PCBM, and p-EHO-PCBA (10-12) as [X-UT-Y]@R(where R is the adduct PCBM, p-EHO-PCBM, and p-EHO-PCBA group) (13-15) supramolecular complexes are presented and investigated.

• 대한화학회지
• /
• 제63권6호
• /
• pp.453-458
• /
• 2019

Synthesis of ZnCo₂O₃ oxide is performed by sol-gel method via nitrate-citrate route. Powder X-ray diffraction (XRD) study shows monoclinic unit cell having lattice parameters: a = 5.721(1) Å, b = 8.073(2) Å, c = 5.670(1) Å, β = 93.221(8)°, space group P_2/m and Z = 4. Average crystallite sizes determined by Scherrer equation are the range ~14-32 nm, whereas SEM micrographs show nano-micro meter size particles formed in ZnCo₂O₃. Endothermic peak at ~798 K in the Differential scanning calorimetric (DSC) trace without weight loss could be due to structural transformation and the endothermic peak ~1143 K with weight loss is due to reversible loss of O₂ in air atmosphere. Energy Dispersive X-ray (EDX) analysis profile shows the presence of elements Zn, Co and O which indicates the purity of the sample. Magnetic measurements in the range of +12 kOe to -12 kOe at 10 K, 77 K, 120 K and at 300 K by PPMS-II Physical Property Measurement System (PPMS) shows hysteresis loops having very low values of the coercivity and retentivity which indicates the weakly ferromagnetic nature of the oxide. Observed X-band EPR isotropic lineshapes at 300 K and 77 K show positive g-shift at g_iso ~2.230 and g_iso ~2.217, respectively which is in agreement with the presence of paramagnetic site Co²⁺(3d⁷) in the oxide. DC conductivity value of 2.875 ×10^-8 S/cm indicates very weakly semiconducting nature of ZnCo₂O₃ at 300 K. DRS absorption bands ~357 nm, ~572 nm, ~619 nm and ~654 nm are due to the d-d transitions ⁴T_1g(⁴F)→²E_g(²G), ⁴T_1g(⁴F)→⁴T_1g(⁴P), ⁴T_1g(⁴F)→⁴A_2g(⁴F), ⁴T_1g(⁴F)→⁴T_2g(⁴F), respectively in octahedral ligand field around Co²⁺ ions. Direct band gap energy, E_g~ 1.5 eV in the oxide is obtained by extrapolating the linear part of the Tauc plot to the energy axis indicates fairly strong semiconducting nature of ZnCo₂O₃.