• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.46-50
• /
• 2016

$Fe_2O_3/TiO_2$ nanocomposite were successfully synthesized by co-precipitation method using $Fe(NO_3)_3{\cdot}9H_2O$ and $Ti(SO_4)_2$ as raw materials. Structural and textural features of the mixed oxide samples were characterized by X-ray diffractometer, field emission scanning electron microscopy and energy-dispersive X-ray. The effects of initial concentration of oxytetracycline (OTC), different competitive ions and organics on the photocatalytic degradation rate of OTC by the $Fe_2O_3/TiO_2$ nanocomposite were analyzed under UV and visible light irradiation. The results indicate that the optimized initial concentration of OTC was 50 mg/L to achieve the best photocatalytic efficiency. $Cu^{2+}$, $NH_4{^+}$, $C_3H_8O$ and EDTA in the aqueous suspension were found to suppress the degradation rate of OTC, whereas the effect of $NO_3{^-}$ and $H_2C_2O_4$ can be ignored.

• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.64-68
• /
• 2002

Photocatalytic treatment of aqueous cyanide was studied using both commercial and home-made $TiO_2$'s as catalysts. Among the catalysts, $TiO_2$ made from $Ti(OC_3H_7)_4$ as a precursor showed the highest activity for the degradation of cyanide exceeding a commercial catalyst of Degussa P25. The difference in activities of the catalysts was mainly related to the surface properties of the catalysts such as the ratio of acidic to basic hydroxyl groups. For the catalyst which showed the highest activity, partially reduced $TiO_2$ showed better activity than calcined one.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.228-234
• /
• 2010

In this paper, Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ composite photocatalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. $TiO_2$, Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ were characterized by scanning electron microscopy (SEM), Transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution. XRD patterns of the composites showed that the photocatalyst composite contained a typical single and clear anatase phase. The surface properties shown by SEM presented a characterization of the texture on Fe-fullerene/$TiO_2$ composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of O, C and Ti elements. Moreover, peaks of the Fe element were observed in the Fe-$TiO_2$ and Fe-fullerene/$TiO_2$ composites. The degradation of MB solution by UV-light irradiation in the presence of photocatalyst compounds was investigated in complete darkness. The degradation of MB concentration in aqueous solution occurred via three kinds of physical phenomena: quantum efficiency of the fullerene; organo-metallic reaction of the Fe compound; and decomposition of $TiO_2$. The degradation rate of the methylene blue solution increased when using Fe-fullerene/$TiO_2$ compounds.

• Journal of Environmental Science International
• /
• v.15 no.9
• /
• pp.855-864
• /
• 2006

This study introduces a method to eliminate formaldehyde and benzene, toluene from indoor air by means of a photocatalytic oxidation reaction. In the method introduced, for the good performance of the reaction, the effect and interactions of the $TiO_2$ catalyst and ultraviolet in photocatalytic degradation on the reaction area, dosages of catalysts, humidity and light should be precisely examined and controled. Experiments has been carried out under various intensities of UV light and initial concentrations of formaldehyde, benzene and toluene to investigate the removal efficiency of the pollutants. Reactors in the experiments consist of an annular type Pyrex glass flow reactor and an 11W germicidal lamp. Results of the experiments showed reduction of formaldehyde, benzene and toluene in ultraviolet $/TiO_2/$ activated carbon processes (photooxidation-photocatalytic oxidation-adsorption processes), from 98% to 90%, from 98% to 93% and from 99% to 97% respectively. Form the results we can get a conclusion that a ultraviolet/Tio2/activated carbon system used in the method introduced is a powerful one for th treatment of formaldehyde, benzene and toluene of indoor spaces.

• Nano
• /
• v.13 no.11
• /
• pp.1850130.1-1850130.12
• /
• 2018

A novel strontium titanate/binary metal sulfide ($SrTiO_3/SnCoS_4$) heterostructure was synthesized by a simple two-step hydrothermal method. The visible-light-driven photocatalytic performance of $SrTiO_3/SnCoS_4$ composites was evaluated in the degradation of methyl orange (MO) under visible light irradiation. The photocatalytic performance of $SrTiO_3/SnCoS_4-5%$ is much higher than that of pure $SrTiO_3$, $SnCoS_4$, $SrTiO_3/SnS_2$ and $SrTiO_3/CoS_2$. The $SrTiO_3/SnCoS_4$ composite material with 5 wt.% of $SnCoS_4$ showed the highest photocatalytic efficiency for MO degradation, and the degradation rate could reach 95% after 140 min irradiation time. The enhanced photocatalytic activity was ascribed to not only the improvement of visible light absorption efficiency, but also the construction of a heterostructure which make it possible to effectively separate photoexcited electrons and holes in the two-phase interface.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.229-236
• /
• 2008

$C/TiO_2$ composites were prepared with surface modified MWCNT sequentially after HCl treatment and TNB as titanium source. There is a single crystal structure which is anatase in all of the samples from the data of XRD. The SEM microphotographs of $C/TiO_2$ composites show that the $TiO_2$ particles were well mixed with the CNT. There are C, O and Al with strong Ti peaks in all samples from EDX results, and it also shows that the sample CT has much more amount of C and Ti content than that of sample HCT. Finally, the photocatalytic activities for the $C/TiO_2$ composites have more effective than that of pristine $TiO_2$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.621-627
• /
• 2001

알루미나 졸에 평균 25nm의 TiO$_2$(Degussa P25) 광 촉매 분말을 분산하여 광촉매 코팅제를 제조하였다. 점도 약 24 cps를 가지 4.4 wt%의 알루미나 졸로부터 약 300nm 두께의 코팅막이 제조되었으며, 졸 점도의 증가에 비례하여 코팅막의 두께도 증가하였다. TiO$_2$광 촉매의 코팅용 바인더로 이용한 알루미나 졸의 결정형은 25~30$0^{\circ}C$에서 pseudo boehmite (AlOOH)이었으며, 50$0^{\circ}C$ 이상에서는 ${\gamma}$-Al$_2$O$_3$으로 전환되었다. AlOOH/TiO$_2$코팅막은 oleic acid와 humic acid에 대한 기상 및 수상 조건에서의 광 촉매 실험에서 우수한 유기물의 광분해 효능을 나타내었다. 아울러 EGI(Electro-Galvanized Iron)에 코팅된 AlOOH/TiO$_2$코팅막은 내식성 및 내지문성의 효과도 부수적으로 나타내었다.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.296-300
• /
• 2007

This paper presents applicability of photocatalytic decomposition of methyl mercaptan using $TiO_2$. A quartz reactor was used in order to elucidate reaction pathway in photocatalytic decomposition of methyl mercaptan. Experimental results showed that more than 99.9% of methyl mercaptan was decomposed within 30 minutes. It was found that the photocatalytic decomposition of methyl mercaptan followed pseudo first order and its reaction coefficient was $0.05min^{-1}$ During 30 minutes in the photocatalytic reaction, the concentration of methyl mercaptan, dimethyl disulfide, $SO_2$, $H_2SO_4$, COS, $H_2S$ were determined. These results showed that 64% of methyl mercaptan were compensated for the increase in sulfur after 30 minutes through the mineralization. The proposed main photocatalytic decomposition pathway of methyl mercaptan was methyl $mercaptan{\rightarrow}dimethyl$ $disulfide{\rightarrow}SO_2{\rightarrow}H_2SO_4$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1397-1400
• /
• 2013

The influence of electron beam irradiation on photocatalytic activity of $TiO_2$ thin films was investigated. $TiO_2$ thin films were prepared by anodization of Ti foil, and they were then subjected to an 1 MeV electron beam. Changes in physical properties and photocatalytic activity of $TiO_2$ before and after e-beam irradiation were investigated. The crystallinity of the synthesized materials was investigated by X-ray diffraction, and the oxidation states of both titanium and oxygen were determined by X-ray photoelectron spectroscopy (XPS). The density of donor ($N_d$) and flat band potential ($E_{fb}$) were investigated by Mott-Schottky analysis, and photocurrent was measured under a 1kW Xenon lamp illumination. After e-beam irradiation, significant change of Ti oxidation state was observed. $Ti^{3+}/Ti^{4+}$ ratio increased mainly due to the surface reduction by electron, and photocurrent was observed to increase with e-beam irradiation.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.561-567
• /
• 2009

The Fe-ACF/$TiO_2$ composites were prepared by a sol-gel method and were characterized by nitrogen adsorption, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and Energy Dispersive X-ray (EDX). The Fe-ACF/$TiO_2$ composites were developed for the decomposition of organic dyes by using a UV lamp. The decomposition effect was investigated under various conditions, such as three selected non-biodegradable organic dyes like Methylene Blue (MB), Methyl Orange (MO), Rhodamine B (Rh.B), and in the presence of Fe and hydrogen peroxide ($H_2O_2$). The photocatalytic activity was derived from possible combination effects, such as (1) adsorption of ACF, (2) generation of electron/hole by $TiO_2$, (3) photo-Fenton reaction of Fe, and (4) oxidation of $Fe^{2+}\;to\;Fe^{3+}\;by\;H_2O_2$.