• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.273-276
• /
• 2003

Polymerization induced diffusion has been successfully applied to create new display components. Based on this principle a new technique to produce polymer covered liquid crystal layers on a single substrate, called photo-enforced stratification, allows cost-effective production of ultra-thin LCDs. The two-step photopolymerization-induced phase separation of a liquid crystal and a polymer precursor can be performed on a variety of substrates and provides freedom in display design.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.223-226
• /
• 2001

비닐에테르류의 비닐단량체는 ZnI$_2$ 존재하에서 HI와 같은 프로톤 산에 의해 양이온 리빙중합이 가능함이 보고된 바 있는데 이 때 프로톤산은 비닐에테르 단량체와 반응하여 adduct를 생성하고, ZnI$_2$는 adduct의 양이온중합 활성화제로 작용하는 것으로 알려져 있다. (중략)

• 한국진공학회지
• /
• 제6권3호
• /
• pp.213-219
• /
• 1997

본 연구에서는 내전극 정전결합 유동가스형 반응장치를 이용하여 플라즈마 중합 스 티렌 박막을 제작하고 적외선분광스펙트럼, 열분해가tm크로마토그래피, 시차주사열량계 및 겔투과성 크로마토그래피의 분석을 통하여 중합조건이 분자구조 및 분자량 분포에 미치는 영향을 조사하였다. 위의 결과로부터 개시 모노머의 화학적 특성과는 다른 고도로 가교된 박막이 생성되었으며, 방전압력, 방전전력 및 가스의 유량 등의 중합조건 조절에 의해 분자 구조, 가교도, 분자량 분포 등의 제어가 가능함이 판명되었다. 따라서 내전극 정전결합 유동 가스형 반응장치에 의해 수행된 플라즈마중합법은 중합조건의 조절에 의해 센서의 감지막, 광도전성 소자 및 포토 레지스트 등에 응용가능한 기능성 유기박막의 제작에 좋은 특성을 나타내는 것을 알 수 있었다.

• 한국광학회지
• /
• 제21권1호
• /
• pp.6-11
• /
• 2010

아크릴레이트계 모노머를 사용한 최적화 된 포토폴리머에 안트라센 형광폴리머를 첨가하여 형광 특성을 가지는 포토폴리머를 제조하고, 514 nm 레이저를 이용하여 2-beam coupling 방법으로 형광 포토폴리머 필름 위에 회절격자를 형성하였다. 기록 시작 후 30초 이내에 선명한 fluorescent line pattern 이 형성되었으며, 회절격자 형성 뒤, 패턴이 형성된 부분에서 형광 세기의 증가가 관찰되었다. 기록 시 간섭 빔 앞에 mask pattern 을 이용하여 $50\;{\mu}m$ gap electrode 패턴을 형성하였다. 이 때 형성된 패턴은 micron scale gap패턴 안에 회절격자로부터 생성된 submicron scale의 grating line을 보였다. 이는 beam의 광 고분자 film 표면에 대한 각도($3.6^{\circ}$, $15^{\circ}$), 패턴에 사용된 광 고분자의 굴절률 등으로부터 Bragg's equation 을 사용하여 계산된 이론적인 grating 간격 ($0.6\;{\mu}m$) 과 오차범위 안에서 일치 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.129.2-129.2
• /
• 2010

AEM which were used for solid alkaline fuel cell(SAFC) were prepared by photo polymerization in method pore-filling with various quaternary ammonium cationic monomers and crosslinkers without an amination process. Their specific thermal and chemical properties were characterized through various analyses and the physico-chemical properties of the prepared electrolyte membranes such as swelling behavior, ion exchange capacity and ionic conductivity were also investigated in correlation with the electrolyte composition. The polymer electrolyte membranes prepared in this study have a very wide hydroxyl ion conductivity range of 0.01 - 0.45S/cm depending on the composition ratio of the electrolyte monomer and crosslinking agent used for polymerization. However, the hydroxyl ion conductivity of the membranes was relatively higher at the whole cases than those of commercial products such as A201 membrane of Tokuyama. These pore-filling membranes have also excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lowest electrolyte crossover through the membranes, and easier preparation process compared of traditional cast membranes. The prepared membranes were then applied to solid alkaline fuel cell and it was found comparable fuel cell performance to A201 membrane of Tokuyama.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.35-40
• /
• 2002

Photoreaction of guest organic anions in layered organic-inorganic hybrid materials was investigated. The layered hybrids were synthesized by an anion-exchange reaction of $[LiAl_2(OH)_6]Cl{\cdot}yH_2O$ layered double hydroxide with aqueous (Z,Z)- and (E,E)-muconates under inert atmospheric condition, to give new organicinorganic hybrids of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$ and $[LiAl_2(OH)_6]_2[(E,E)-C_6H_4O_4]{\cdot}H_2O$, respectively. The basal spacings calculated by XRPD of intercalates indicate that muconate anions have almost vertical arrangements against the host $[LiAl_2(OH)_6]^+$ lattices in the interlayer of organic-inorganic hybrid materials. When UV light was irradiated on the suspension of $[LiAl_2(OH)_6]_2[(Z,Z)-C_6H_4O_4]{\cdot}zH_2O$, the (Z,Z)-muconate anions of the gallery space of hybrids were polymerized in the aqueous media while it was isomerized into more stable (E,E)-muconate in the methanollic suspension in the presence of catalytic amount of molecular iodine. All the products were characterized using elemental analysis, TGA, XRPD, FT-IR, $^1H$ NMR and $^{13}C$ CP-MAS NMR.

• Fibers and Polymers
• /
• 제2권2호
• /
• pp.108-115
• /
• 2001

Vinyl acetate was polymerized in ultraviolet-ray initiated bulk system at low temperatures using 2,2-azobis(2,4-dimethylvaleronitrile) (ADMVN) or 2,2-azobis(isobutyronitrile) (AIBN) as the photoinitiator, respectively. High molecular weight (HMW) poly(vinyl alcohol) (PVA) having number-average degree of polymerization ($P_n$) of 3,900-7,800 and syndiotactic diad (S-diad) content of 52.5-54.0% could be prepared by complete saponification of synthesized linear poly(vinyl acetate) (PVAc) having $P_n$ 5,900-9,400 obtained at conversion of below 30%. $P_n$ of PVA using ADMVN was larger than that of PVA using AIBN. On the other hand, conversion of the former was smaller than that of the latter, and it was found that the initiation rate of the ADMVN was lower than that of AIBN. This could be explained by a fact that the rate of photolysis of AIBN is faster than that of ADMVN due to the higher quantum yield or dissociation rate constant of AIBN than that of ADMVN. The $P_n$, syndiotacticity, and whiteness of PVA from PVAc polymerized at lower temperatures were superior to those of PVA from PVAc polymerized at higher temperatures.

• Membrane and Water Treatment
• /
• 제1권2호
• /
• pp.103-120
• /
• 2010

Surface modification of microfiltration and ultrafiltration membranes has been widely used to improve the protein adsorption resistance and permeation properties of hydrophobic membranes. Several surface modification methods for converting conventional membranes into low-protein-binding membranes are reviewed. They are categorized as either physical modification or chemical modification of the membrane surface. Physical modification of the membrane surface can be achieved by coating it with hydrophilic polymers, hydrophilic-hydrophobic copolymers, surfactants or proteins. Another method of physical modification is plasma treatment with gases. A hydrophilic membrane surface can be also generated during phase-inverted micro-separation during membrane formation, by blending hydrophilic or hydrophilic-hydrophobic polymers with a hydrophobic base membrane polymer. The most widely used method of chemical modification is surface grafting of a hydrophilic polymer by UV polymerization because it is the easiest method; the membranes are dipped into monomers with and without photo-initiators, then irradiated with UV. Plasma-induced polymerization of hydrophilic monomers on the surface is another popular method, and surface chemical reactions have also been developed by several researchers. Several important examples of physical and chemical modifications of membrane surfaces for low-protein-binding are summarized in this article.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.55-62
• /
• 2004

Synthesis of poly[N-(formyloxyphenyl)maleimide](PFOMI) as photopolymer were investigated with various kinds of photosensitive groups. Generally, photopolyimide have some deficiencies in solubility, sensitivity, reserve stability of the photosensitive solution, and the precision of image pattern. The study has been required on those polymers which have high glass transition temperature and photo efficiency, and low dielectricity. The existing condensation resins require high curing temperature and perfect elimination of subreacted materials that are produced during the process after irradiation and various membrane damages such as the deformation and contraction in image pattern cure. In this study poly[N-(hydroxyphenyl)maleimide](PHPMI) was synthesized. The PHPMI were analyzed by H-NMR and FT-IR. The measured number average molecular weight of PHPMI was produced was $1.06{\times}10^4$. Poly[N-(formyloxyphenyl)maleimide](PFOMI) as a type of photo-Fries rearrangement was synthesized by NHPMI and formic acid followed by radical polymerization. PFOMI was analyzed by FT-IR, and photocharacteristics was investgated by UV spectra and FT-IR before and after UV irradiation. Based on the image characteristics of PFOMI measured from optical micrographs, it was formed that the resolution of positive type PFOMI was $0.5{\mu}m$.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.753-761
• /
• 2014

We propose a two-step UV irradiation procedure to fabricate polymer-dispersed liquid crystal (PDLC) films by lamination. During the first UV treatment, before lamination, the UV-curable monomers coated on one film substrate are solidified through photo-polymerization as the phase separation between the liquid crystals and the monomers. Introducing an adhesion-enhancement layer on the other plastic substrate and controlling the UV irradiation conditions ensure that UV-induced cross-linkable functional groups remain on the surfaces of the photo-polymerized layers. Thereby, the adhesion stability between the top and bottom films is much improved during a second (post-lamination) UV treatment by further UV-induced cross-linking at the interface. Because the adhesion-enhancement and PDLC layers prepared by the bar-coating process are solidified before lamination, the PDLC droplet distribution and the cell gap between the two plastic substrates remain uniform under the lamination pressure. This ensures that the voltage-controlled light transmittance is uniform across the entire sample.