• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.245-252
• /
• 1984

Willemite phosphor is a good one having excellent luminescence efficiency that it;s emission wavelength is in the range of about 525 nm. The energy band gap of this willemite phosphor is about 4.1 eV. When the ratio of ZnO/SiO is 1.8 and Mncl in used as activator source the phosphor has the value of maximum luminescence efficiency. The characteristic of willemite phosphor is tendency of the dependence of temperature. The willemite which was fired with activator after being synthesized at initial firing without activator shows higher value of luminescence efficiency than willemite which was fired with activator in initial stage, When the concentration of activator is 1-1.5mol% it has its most favorite condition and the value of luminescence efficiency decreases according to increasement of activator concentration.

• Ceramist
• /
• v.21 no.1
• /
• pp.80-97
• /
• 2018

To realize a high luminous efficacy and a high emission color purity for the white-LEDs, the understanding for luminescence properties of the phosphors is significantly important because the performance of white-LEDs is directly affected by the luminescence properties of the phosphors. In this paper, therefore, we reviewed some commercially available $Eu^{2+}$- and $Ce^{3+}$- activated phosphors and discussed for the luminescence properties of these phosphors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.581-584
• /
• 2002

A new method for the preparation of lanthanide ions activated strontium aluminates phosphor by combustion method has been proposed. Combustion method consist of the redox reactions between the respective metal nitrates and urea in a preheated funace at $500^{\circ}C$. The luminescence behavior of the phosphor was studied and compared with corresponding phosphor prepared by conventional method. Effect of $Mg^{2+}$ ion concentration in strontium aluminate phosphor was investigated and the maximum luminescence of about $100cd/m^2$ was obtained. This method gave better brightness and small size to the phosphor than made by conventional method.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.419-422
• /
• 2009

The luminescence intensity of calcium sulfide codoped with $Eu^{2+},\;Si^{4+}\;and\;Ga^{3+}$ was investigated as a function of the dopant concentration. An enhancement of the red luminescence resulted from the incorporation of $Si^{4+}\;and\;Ga^{3+}\;into\;CaS:Eu^{2+}.\;The\;non-codoped\;CaS:Eu^{2+}$ converted only 3.0% of the absorbed blue light into luminescence. As the $Si^{4+}\;and\;Ga^{3+}$ were embedded into the host lattice, the luminescence intensity increased and reached a maximum of Q = 10.0% at optimized concentrations of the codopants in CaS. Optimized CaS:$Eu^{2+},Si^{4+},Ga^{3+}$ phosphors were fabricated with blue GaN LED and the chromaticity index of the phosphor-formulated GaN LED was investigated as a function of the wt% of the optimized phosphor.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.65-68
• /
• 2007

High brightness and long persistent luminescence phosphor $CaAl_2O_4:Eu^{2+}$ was prepared with varying $Eu^{2+}$ concentration by solid state reaction technique. Synthesized materials were investigated by powder X-ray diffractometer (XRD), SEM, TEM, photoluminescence excitation and emission spectra. Broad band UV excited luminescence of the $CaAl_2O_4:Eu^{2+}$ was observed in the blue region (${\lambda}_{max}\;=\;440\;nm$) due to transitions from the $4f^65d^1$ to the $4f^7$ configuration of the $Eu^{2+}$ ion. The decay time of the persistence indicated that the persistent luminescence phosphor has bright phosphorescence and maintains a long duration. These materials have great potential for outdoor night time displays.

• Journal of Applied Reliability
• /
• v.12 no.4
• /
• pp.275-285
• /
• 2012

This paper presents a changes of luminescence property for converted white LEDs with the commercially available silicate phosphor. If silicate phosphor's quantity increase step by step. luminescence property will be changing. we analyze luminescence property for these change and carry out the high temperature aging test for 7,000 hours, the high temperature and humidity aging test for 7,000 hours for reliability. LED degradation not only results in reduced light output but also in color changes. so we monitor correlated color temperature (CCT), chromaticity coordinates(x, y) and spectrum intensity. Those results suggest that humidity factor more bad effect in color changes than temperature factor and Lighting quality is related with quantity of phosphor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.49-52
• /
• 2002

Degradation characteristics of cathodoluminescence (CL) of ZnS:Ag,Cl phosphor were investigated with measurements of CL and photoluminescence (PL). Phosphoric acid treatment was performed to phosphor particles in order to improve CL degradation of phosphor screen that occurred during panel sealing process, and we will discuss mechanisms of degradation and improvement of luminescence mainly with help of AES (auger electron spectroscopy) analysis.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.192-197
• /
• 2014

Red-emitting nitride phosphors recently attracted considerable attention because of their high thermal stability and high color rendering index properties. For excellent phosphor of white light-emitting-diode, ternary nitride phosphor of $Sr/SmSi_5N_8:Eu^{2+}$ with different $Eu^{2+}$ ion concentration were synthesized by solid state reaction method. In this work, red-emitting nitride $Sr/SmSi_5N_8:Eu^{2+}$ phosphor was successfully synthesized by using multi-step high frequency induction heat treatment. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Sr/SmSi_5N_8:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Sr/SmSi_5N_8:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 300 - 550 nm, namely from UV to visible area with distinct enhanced emission peaks. With an increase of $Eu^{2+}$ ion concentration, the peak position of emission in spectra was red-shifted from 613 to 671 nm. After via multi-step heat treatment, prepared phosphor showed excellent luminescence properties, such as high emission intensity and low thermal quenching, better than commercial phosphor of $Y_3Al_5O_{12}:Ce^{3+}$. Using $Eu_2O_3$ as a raw material for $Eu^{2+}$ dopant with nitrogen gas flowing instead of using commercial EuN chemical for $Sr/SmSi_5N_8:Eu^{2+}$ synthesis is one of characteristic of this work.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2523-2528
• /
• 2012

Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.745-750
• /
• 2000

YAG:Tb3+ as green phosphor were studied for the development of low voltage FED phosphor prepared by hydrothermal synthesis. We changed the concentration of luminescence center ion Tb3+ in hydrothermal reaction of which conditions were at 8M NH4OH as mineralizer, at 35$0^{\circ}C$ for 12hrs. As results, we could finally get the YAG:Tb3+ (Y3-xTbxAl5O12) powder of which particle size was about 0.2~1.0${\mu}{\textrm}{m}$. The excitation spectra and the green emitted spectra of YAG:Tb3+ phosphor powder were observed. When we doped 0.25 mol Tb to YAG, we could observe the maximum cathodoluminescence from YAG:Tb3+ phosphor and the chromaticity coordinate of the phosphor was shown x=0.35, y=0.56 in CIE1931 diagram.