• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.91-96
• /
• 2014

For Sound source direction and separation method, Frequency Domain Binaural Model(FDBM) shows low computational cost and high performance for sound source separation. This method performs sound source orientation and separation by obtaining the Interaural Phase Difference(IPD) and Interaural Level Difference(ILD) in frequency domain. But the problem of reflection occurs in practical environment. To reduce this reflection, a method to simulate the sound localization of a direct sound, to detect the initial arriving sound, to check the direction of the sound, and to separate the sound is presented. Simulation results show that the direction is estimated to lie close within 10% from the sound source and, in the presence of the reflection, the level of the separation of the sound source is improved by higher Coherence and PESQ(Perceptual Evaluation of Speech Quality) and by lower directional damping than those of the existing FDBM. In case of no reflection, the degree of separation was low.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.134-140
• /
• 2021

In this paper, I introduce a novel design method of a high performance nanophotonic beam deflector providing broadband operation, large active tunability, and signal efficiency, simultaneously. By combining thermo-optically tunable vanadium dioxide nano-ridges and a metallic mirror, reconfigurable local optical phase of reflected diffraction beams can be engineered in a desired manner over broad bandwidth. The active metagrating deflectors are systematically designed for tunable deflection of reflection beams according to the thermal phase-change of vanadium dioxide nano-ridges. Moreover, by multiplexing the phase-change supercells, a robust design of actively tunable beam splitter is also verified numerically. It is expected that the proposed intuitive and simple design method would contribute to development of next-generation optical interconnects and spatial light modulators with high performances. The author also envisions that this study would be fruitful for modern holographic displays and three-dimensional depth sensing technologies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.460-463
• /
• 2003

We report the microwave reflection coefficient $S_{11}$ of copper(II)-phthalocyanine(CuPc) using a near-field microwave microscope(NSMM) in order to understand the intrinsic electromagnetic properties of organic materials. For a NSMM system, a high-quility microstip resonator coupled with a dielectric resonator was used. The reflection coefficient $S_{11}$ was changed by the preparation conditions of CuPc thin films. We compared the reflection coefficient with crystal phase, surface morphology, UV absorption spectra and x-ray diffraction results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.9
• /
• pp.392-397
• /
• 2003

Reflection type phase shifter with Lange coupler is widely used as a circuit topology to obtain phase shift in broadband operation. The phase shift of 33.75$^{\circ}$ at this type is achieved by simultaneously turning on both 11.25$^{\circ}$ and 22.5$^{\circ}$ . In order to improve the phase accuracy of 33.75$^{\circ}$, this paper proposes the additional circuit which is composed of a GaAs PIN diode and a reactive load. By utilizing MMIC technology. Over the 2-6 GHz band, the measured result of phase difference between the previous circuit and the proposed circuit shows average 4.7$^{\circ}$ on the basis of 33.75$^{\circ}$. Insertion loss and return loss are invariant in comparison with the previous circuit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.308-315
• /
• 2002

In this paper, the 5-bit digital phase shiftier with 10 InGaAs HEMTs is designed and fabricated for U.S. mobile DBS receiving active phased array antenna system in 12 GHz band. 11.25 $^{\circ}$, 22.5$^{\circ}$ and 45$^{\circ}$ phase bits are designed in leaded-line type. 90$^{\circ}$ and 180$^{\circ}$ phase bits are designed in reflection type combined with ring hybrid. The return loss more than 17.5 ㏈, insertion louts less than 7.8 ㏈, and maximum phase error of $\pm$6$^{\circ}$for 32 phase responses are measured in 12.2 GHz~ 12.7 GHz band.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.173-177
• /
• 2003

The present work is focused on the preconcentration of nickel and its determination by means of diffuse reflection spectroscopy. The preconcentration of nickel was carried out by sorption on macroporous aminocarboxylic amphoteric resin ANKB-35. Based on this collector, a method to determine nickel in wastes of heat power industry was worked out using solid-phase spectroscopy. The colored surface compound to be determined was obtained by a preceding nickel sorption on the resin and by subsequent treatment of the concentrate obtained with definite amounts of 1-(2-pyridilazo)-2-naphtol (PAN). The Ni calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 200.0 mL) and the detection limit is 0.05 mg/L. The presence of $Cu^{2+},\;Fe^{3+},\;Co^{2+}$ ions as well as macrocomponents of natural water $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+})$ do not hinder the solid-phase spectroscopy determination of nickel. The nickel determination by diffuse reflection spectroscopy was carried out in model solutions as well as in solutions obtained after the dissolution of wastes of heat power industry.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.68-74
• /
• 2008

The substrate integrated waveguide (SIW) structure can be approximated as the rectangular waveguide using common dielectric substrate with via-holes. To realize reflection-type resonator, $50-{\omega}$ microstrip line can be used for coupling with the center plane of the cavity. The oscillator is designed to operate at 9.45 GHz using the reflection-type SIW cavity resonator. The phase noise of oscillator shows -98.1dBc/Hz at 100 KHz offset. In experiment, the reflection type SIW cavity resonator improves the loaded quality factor making the low phase noise oscillator possible. Due to the entirely planar structure of this resonator, this technique can also be adequate in oscillator applications for a low cost and low phase noise performance.

• Education of Primary School Mathematics
• /
• v.18 no.2
• /
• pp.155-173
• /
• 2015

The purpose of this study is to offer the implication for elementary school mathematics teaching by analyzing teachers' reflection on the cognitive demands of mathematical tasks they give in class. During the setup phase and the implementation phase in math class, the researchers analyzed the change of cognitive demands on mathematical tasks and the factors which had influence on such changes. After teachers' reflection on teaching, the researchers analyzed the change of cognitive demands on mathematical tasks and the factors which had influence on such changes in math classes. As a result, before teachers' reflection on the cognitive demands of mathematical tasks, the higher-level demands of mathematical tasks had a tendency to decline. However, after teachers' reflection on the cognitive demands of mathematical tasks, higher-level demands of mathematical tasks were maintained.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.337-338
• /
• 2007

The present paper proposes the method which improves a record and remaking efficiency of the optical pickup as applying the mirror where Phase Shift(PS) principle is applied to optical pickup. Plan to get a circularly polarized light quality above quality which is embodied through Existing Quater Wave Plate(QWP) and a function of total reflection mirror as applying PS mirror which integrates QWP with the function of the total reflection to optical pickup. In the present paper, embody circularly polarized light quality through applying PS mirror to optical pickup, and it through, plan to propose to come true the optimization of recording and remaking CD/DVD disc.