• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.701-714
• /
• 2013

최근 바이오디젤의 보급 활성화에 정책에 따라 석유제품에 바이오디젤 혼합량이 증가되고 있으며, 이러한 혼합량 증가에 따른 겨울철 저온특성과 산화안정성에 대한 문제가 제기되고 있다. 따라서 본 연구에서는 바이오디젤 혼합연료에 대하여 실제 저장환경을 모사하고, 저장 중 품질변화를 평가하여 저장환경별 산화 경향과 품질에 미치는 영향 등의 규명을 통해 산화 제품의 품질관리 방안을 제시하였다. 바이오디젤 혼합연료의 산화열화 평가 결과, 직접적인 햇빛 노출 및 대기노출이 없는 저장용기에서는 여름철 약 18주간은 산화에 의한 특별한 품질저하는 없었지만, PE 재질 플라스틱 용기의 경우 약 2주간의 햇빛노출에 급격한 산화가 일어나 품질저하를 초래하였다. 이러한 현상을 일부 품질변화뿐만 아니라 FT-IR 스펙트럼 변화로도 확인 할수 있었다. 하지만 산화가 상당히 진행된 연료라도 품질기준을 모두 만족하여 품질검사 항목만으로는 특별한 현상을 발견할 수 없었다. 즉, 품질기준을 만족하더라도 산화로 인한 산화 생성물(고분자물질, 유기산 등)에 의해 차량 문제를 유발할 수 있는 충분한 여지가 있었다.

• 공업화학
• /
• 제25권6호
• /
• pp.639-644
• /
• 2014

국내 자동차사는 순정엔진오일을 정해놓고 일반엔진오일보다 높은 가격으로 판매하고 있다. 본 연구에서는 국내 순정엔진오일 14종과 동급의 일반엔진오일(KS제품) 14종에 대하여 품질비교 및 차량을 이용하여 10,000 km씩 주행한 뒤, 회수된 엔진오일의 물성을 분석하였다. 분석 결과, 사용하지 않은 신유는 순정엔진오일과 일반 엔진오일의 품질이 대동소이하였지만, 오히려 주행 후 회수된 일반엔진오일은 순정엔진오일에 비해 윤활성이 우수하였으며, 동점도와 전산가 변화가 작은 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.258-264
• /
• 2002

Pyrolysis of polypropylene(PP) Was performed to find the effects of the pyrolysis temperature(425, 450, 475 and $500^{\circ}C$) and the pyrolysis time(35, 50 and 65minutes), respectively. Conversion and liquid yield obtained during PP pyrolysis continuously increased with the pyrolysis temperature( up to $500^{\circ}C$) and the pyrolysis time(up to 65minutes), especially these were more sensitive to the pyrolysis time at $425^{\circ}C$ than other pyrolysis temperatures. Each liquid product formed during the pyrolysis was classified into gasoline, kerosene, light oil and wax according to the distillation temperature based on the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. The liquid products of PP pyrolysis up to $450^{\circ}C$ were almost same fractions($26{\pm}3$wt.% gasoline, $20{\pm}2$wt.% kerosene and $23{\pm}2$wt.% light oil) except wax($3{\sim}13$wt.%). On the other hand, the pyrolysis of PP from $475^{\circ}C$ to $500^{\circ}C$ produced $26{\pm}3$wt.% wax, $24{\pm}1$wt.% gasoline, $18{\pm}1$wt.% kerosene and $16{\pm}1$wt.% light oil. After all, the main liquid product changed from gasoline to wax with increasing pyrolysis temperature.

• 폴리머
• /
• 제29권1호
• /
• pp.64-68
• /
• 2005

폐플라스틱으로 수거되는 내충격 폴리스티렌의 액상연료로서의 재활용을 위해 열분해에 의한 HIPS 해중합 특성을 연구하였다. 열분해 온도 및 열분해 시간이 HIPS의 열분해에 미치는 영향을 조사하였다. HIPS의 열분해 반응 시작온도와 활성화에너지는 가열속도가 증가함에 따라 증가하였다. 전환율과 액체수율은 열분해 온도와 시간이 증가함에 따라 점진적으로 증가하였다. 열분해 과정에서 생성된 각각의 액체성분을 한국석유품질검사소 석유제품 품질기준에 기초하여 증류온도에 따라 가솔린, 등유, 경유, 중유로 분류하여 본 결과, 가솔린 > 중유 > 등유 > 경유 순이었다. 특히 가솔린 성분은 열분해된 HIPS의 51${\pm}$6 wt%를 차지하였다.

• Carbon letters
• /
• 제28권
• /
• pp.81-86
• /
• 2018

Empty fruit bunch (EFB) char was used to remove $NO_x$ and odorous substances. The physicochemical properties of the EFB chars were altered by steam or KOH treatments. The Brunauer-Emmett-Teller surface area and porosity were measured to determine the properties of the modified EFB chars. The $deNO_x$ and adsorption test for hydrogen sulphide and acetaldehyde were performed to determine the feasibility of the modified EFB chars. The KOH-treated EFB (KEFB) char revealed higher $deNO_x$ efficiency than with commercial activated carbon. The Cu-impregnated EFB char also had high $deNO_x$ efficiency at temperatures higher than $150^{\circ}C$. The KEFB char showed the highest hydrogen sulphide and acetaldehyde adsorption ability, followed by the steam-treated EFB char and untreated EFB char. Moreover, the product prepared by sulfonation of EFB char showed excellent performance for esterification of palm fatty acid distillate for biodiesel production.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.

• Natural Product Sciences
• /
• 제9권3호
• /
• pp.180-182
• /
• 2003

In the present study the whole plant of Ammania baccifera Linn was extracted with petroleum ether, chloroform, ethyl acetate and ethanol. The extracts were vacuum dried to yield the respective petroleum ether (PEE), chloroform (CE), ethyl acetate (EAE) and ethanol extracts (EE). PEE, CE, EAE and EE were evaluated for their antipyretic and diuretic activity at 200 mg/kg dose level. Significant antipyretic activity was associated with PEE, CE, EAE and EE. CE was found to exhibit higher antipyretic activity as paracetamol at 100 mg/kg dose level. Significant diuretic activity was exhibited by EAE, EE and PEE. The present study supports the claims of Ammania baccifera mentioned in the Indian system of medicine.

• Natural Product Sciences
• /
• 제14권1호
• /
• pp.56-61
• /
• 2008

Bioactivity guided phytochemical study of the petroleum ether and butanol extracts of Clematis hirsuta resulted in the isolation of 12 compounds. Rat paw edema as a model of acute inflammation was used to evaluate the anti-inflammatory activity of the extracts and the chromatographic fractions. Five known sterols and triterpenes namely: ${\beta}-amyrin$ (1), lupeol (2), ${\beta}-sitosterol$ (3), oleanolic acid (4) and stigmasterol glycoside (5) were isolated from the petroleum ether extract. The n-butanol extract afforded two compounds reported for the first time from natural source: (S)-(+)-dihydro-5-(hydroxymethyl)-2(3H)-furanone (7) and (s)-(-)-5-hydroxymethyl-2(5H)-furanone (8). In addition, anemonin (6), dihydro-4-hydroxy-5-(hydroxymethyl)-2(3H)-furanone (2-deoxy-D-ribono-1,4-lactone) (9), biophenol (cimidahurin) (10), glucose (11) and sucrose (12) were also identified. The structures were determined from spectroscopic data including 1D- and 2D-NMR experiments.

• 한국미생물·생명공학회지
• /
• 제8권3호
• /
• pp.167-172
• /
• 1980

홍국균의 배양액으로부터 황색 색소를 분리하여 다음과 같은 결론을 얻었다. 1. 60％-ethanol-petroleum ether (1:2)의 혼합유기 용매로부터 partition chromatography 방법으로 색소를 추출하여 petroleum ether층에서 황색 색소를 얻었다. 2. 추출한 황색 색소의 최대 흡광도는 394-403nm 이었으며 적색계색소는 함유되어 있지 않았다. 3. Thin layer chromatography에 의한 황색계 색소는 황색의 Monascin이 대부분이었고 주황색의 unknown 물질 및 pale yellow의 Monascidin A가 소량 함유되어 있었다. 4. 분리한 지용성의 황색 색소를 N-KOH로 검화시켜 수용성인 K염 복합 황색색소로 정제하였다.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.508-516
• /
• 2011

Hydrotreated biodiesel(HBD) is paraffinic bio-based liquid, with the chemical structure $C_nH_{2n+2}$, originating from vegetable oil(the process can also be applied to animal fat). The oil or fat is treated in a number of process, the most important being hydrogenation, in order to create a bio-based liquid diesel fuel. During the hydrogenation, oxygen is removed from the triglyceride and converted into water. Propane is formed as a by product and can be combusted and used for energy production. HBD can be used in conventional diesel engines, pure or blended with conventional diesel, due to its similar physical properties to diesel. This study reports the quality characteristics with chemical and physical properties as an alternative diesel fuel. Especially, HBD showed higher cetane value and number than FAME, and it is consisted of $C_{15}$ - $C_{18}$ n-paraffinic compounds. We also describes quality characteristics of HBD blends(2, 5, 10, 20, 30, 40, 50 vol%) in automotive diesel. HBD blends(max. 20 vol%) were the limit by the Korean specification due to poor low temperature characteristics.