• Membrane Journal
• /
• v.29 no.3
• /
• pp.147-154
• /
• 2019

The permeate flux increments of a natural convection instability flow (NCIF) caused by the change of inclined angles ($0{\sim}180^{\circ}$) to gravity of the commercial membrane module were tested in the dead-end membrane filtration of BSA protein solution. The NCIF are more generated as the inclined angle increased from $0^{\circ}$ to $180^{\circ}$, and the occurred NCIF enhances permeate flux. However, the commercial module can only generate NCIF by completely removing the air gap in module. Since the custom design module designed in this study is permeated in a crossward direction ($90^{\circ}$), NCIF is always generated even if there is the air gap in module. The results of membrane filtration of BSA and dextran solutions using a custom design module showed that the flux in the crossward direction is increased to about 3.8 times for BSA solution and 1.8 times for dextran solution after two hours of operation due to the occurrence of NCIF. Also, NCIF generation is continued during 20 hours filtration of BSA solution, increasing the permeate flux to about 7.5 times. Since the custom design module with a permeation in the crossward direction and NCIF is always generated within the module, so it is possible to expect an increase in permeate flux due to the suppression of fouling formation, and thus to be utilized as a superb dead-end membrane module.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.49-56
• /
• 2021

In this study, a liquid crystal emulsion with a composition ratio similar to the skin lipid composition was manufactured using ceramide, glycolipids, cholesterol, and fatty acids, and a polarized microscope was used to identify liquid crystal particles in the formulation, and a cryso-SEM was used to confirm the formation of a multilayer structure. The above samples were stored at room temperature for one month and the liquid crystal structure was continuously maintained through microscopic observation. In addition, a cream composition containing liquid crystal emulsion was manufactured, and the efficiency of ceramide skin penetration was confirmed using three-dimensional artificial skin. Clinical trials were conducted using the cream composition and the results of clinical trials on skin barrier improvement were confirmed by measuring skin moisture retention (skin hydration) and transepidermal water loss (T EWL) of subjects compared to general emulsion.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.853-865
• /
• 2019

In this study, the skin permeability was measured by adding skin penetrating peptides, arginine oligomers R4(tetra-D-arginine), R6(hexa-D-arginine) to little skin-permeable wrinkle improvement peptides GHK, GHK-Cu, and Pal-GHK liposomes, and the results were analyzed by the following six cases. (1) In cases where only wrinkle improvement peptides GHK, GHK-Cu, and Pal-GHK were contained liposomes; the final cumulative permeations in 24 hours were 6.05%, 7.4%, and 8.83% respectively. (2) In cases where arginine oligomers R4, R6 were added to GHK liposomes; the final cumulative permeations in 24 hours were 13.63% and 7.68%. (3) In cases where R4, R6 were added to GHK-Cu liposomes; the final cumulative permeations in 24 hours were 15.46% and 8.64%. (4) In cases where R4, R6 were added to Pal-GHK liposomes; the final cumulative permeations in 24 hours were 16.9% and 10.67%. (5) In cases where R4 were added to GHK, GHK-Cu, and Pal-GHK liposomes; the final cumulative permeations in 24 hours were 13.63%, 15.46%, and 16.9% respectively. (6) In cases where R6 were added to GHK, GHK-Cu, and Pal-GHK liposomes; the final cumulative permeations in 24 hours were 7.68%, 8.64%, and 10.67% respectively. This experiment showed that skin absorption of GHK was increased by copper ion (Cu2+) and palmitic acid and skin absorption of wrinkle improvement peptides was enhanced by cell penetrating peptides, and R4 showed higher effect than R6 in GHK, GHK-Cu and Pal-GHK. Through this process, we propose broad use and application in wrinkle improvement functional cosmetics by presenting the optimal conditions for increasing skin absorption of GHK, GHK-Cu, thus maximizing its efficacy.

• Journal of Applied Biological Chemistry
• /
• v.53 no.2
• /
• pp.65-70
• /
• 2010

Medium-chain fatty acids (MCFA) are composed of 8-12 carbon atoms, and are found in coconut, cuphea, and palm kernel oil. MCFA were introduced into clinical nutrition in the 1950s for dietary treatment of malabsorption syndromes because of their rapid absorption and solubility. Recently, MCFA have been applied to Gastrointestinal Permeation Enhancement Technology (GIPET), which is one of the most important parts in drug delivery system in therapeutics. Therefore, to accumulate the MCFA in seed oil of rapeseed, much effort has been conducted by classical or molecular breeding. Laurate can be successfully accumulated up to 60 mol% in the seed oil of rapeseed by the expression of bay thioesterase (Uc FatB1) alone or crossed with a line over-expressing the coconut lysophosphatidic acid acyltransferase (LPAAT) under the control of a napin seed-storage protein promoter. Also, caprylate and caprate were obtained 7 mol% and 29 mol%, respectively, from plants over-expressing of the medium-chain specific thioesterase (Ch FatB2) alone or together with the chain-length-specific condensing enzyme (Ch KASIV). Despite the success of some research in utilizing parallel classical and molecular breeding to produce MCFA, commercially available seed oils have for the most part, not been realized. Recent research in the field of developing MCFA-enriched transgenic plants has established that there is no single rate-limiting step in the production of the target fatty acids. The purpose of this article is to review some of the recent progress in understanding the mechanism and regulation of MCFA production in seed oil of rapeseed.