• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.583-599
• /
• 2022

According to the discussion on the low-density economy in OECD industrial growth in remote area has played a central role in the members'economic recovery from the financial crisis in the mid-2000s. Based on the OECD's low-density economy this study examines the phenomena and spatial characteristics of industrial growth in peripheral areas of Korea. The growth of industries in the peripheral areas shows a similar growth characteristics as cases in the OECD members. Various manufacturing and service sectors as well as traditional sectors such as agriculture, forestry and fishing have grown in the peripheral areas since the mid-2000s. Firms in the peripheral areas form various cooperative networks to overcome the unfavorable regional conditions. The growth of new industries shows the possibility of path-dependent development in the periphery. Based on the results, implications on the policies for supporting the diversification of regional industries, setting flexible regional boundaries for policies, and linking policy sectors are derived.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.341-344
• /
• 2008

The complicated helical flow formed in the regenerative turbomachines is usually decomposed into a peripheral component and a circulatory component. On the basis of the momentum exchange theory, the circulatory flow plays a critical role of imparting angular momentum to the peripheral flow. Therefore, the accuracy of performance prediction is dominated by the circulatory flow modeling. Until now the circulatory flow has been accounted of a standstill flow normal to the peripheral flow. However, the circulatory path from the impeller exit to the re-entrance inlet is exposed to the adverse pressure gradient, so it would be more realistic to describe that the circulatory flow is formed on the skewed plane not perpendicular to the peripheral flow. Present study suggests new circulatory flow loss model including the effect of adverse pressure gradient and modifies the effective circulatory flow rate and circulatory pivot which were previously published.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.34-43
• /
• 1999

A high-speed image processor (HIP) is implemented for a high-speed multi-function peripheral. HIP has a binarization architecture with unified data path. It has the pixel-by-pixel pipelined processing to minimize size of the external memory. It performs pre-processing such as shading correction, automatic gain control (AGC), and gamma correction, and also drives external CCD or CIS modules. The pre-processed data can be enlarged or reduced. Various binarizatin algorithms can be processed in the unified archiecture. The embedded binarization algorithms are simple thresholding, high pass filtering, dithering, error diffusion, and thershold modulated error diffusion. These binarization algorithms are unified based on th threshold modulated error diffusion. The data path is designed to share the common functional block of the binarization algorithms. The complexity of the controls and the gate counts is greatly reduced with this novel architecture.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.321-325
• /
• 2008

Void areas(holes) as an inevitable phenomenon exist in geographic routing of wireless sensor networks, because the unpredictable and harsh nature application environment or uneven energy consumption. Most of the existing schemes for the issue tend to construct a static detour path to bypass a hole. The static detour path may lead to uneven energy consumption of the nodes on the perimeter of the hole; thus it may enlarge the hole. At the same time, traffic would concentrate on the peripheral node of the hole; thus the nodes on the perimeter of the hole tend to be depleted quietly. In previous work, we have proposed a hole geometric model to reduce the energy consumption and packet collisions of the nodes on the hole boundary. This scheme, however, still has the static detour path problem. Therefore, we extend the previous work by constructing a dynamic detour path hole geometric model for wireless sensor networks in this paper. The location of hole detour anchors is dynamically shifted according to Gaussian function, just generating dynamic hole detour paths.

• Journal of the Korean Dietetic Association
• /
• v.25 no.4
• /
• pp.257-268
• /
• 2019

This study provides basic data on how stress impacts the processed convenience foods purchase attitudes and the selection attributes of housewives. The stress consists of 3 factors, which were housework stress, family relation stress and economic stress. The processed convenience food purchase attitude consisted of 2 factors, which were peripheral influence purchase and conviction purchase. The processed convenience food selection attribute consisted of 4 factors, which were quality, convenience, packaging and price. Factor loading confirmation and reliability test were conducted, and the reliability was confirmed with Cronbach's alpha coefficients for all the factors exceeding 0.5. The high stress levels showed significantly high stress factors of housework, family relations and economic stress (P<0.001). The high stress group was shown to make purchases by recognizing peripheral influences (P<0.01). When the selection properties of processed convenience foods depending on different stress levels were examined, it was revealed that among the three groups, the low stress group least considered the price aspect (P<0.01). After deducting the factors, AMOS (Analysis of Moment Structure) was used to conduct the confirmatory factor analysis for verifying validity. The structural equation model was used to determine the path coefficient. From the processed convenience foods purchase attitude, the peripheral influence purchase had significantly positive (+) effects on convenience (P<0.05). Also, conviction purchase was shown to have significantly positive (+) effects on quality (P<0.05). Housework and family relation stress were shown to have negative (-) effects on processed convenience foods selection attribute, and economic stress was shown to have positive (+) effects, although no significant relationships were revealed.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.386-396
• /
• 2002

This paper presents a neural network-based near-optimal routing algorithm. It employs a modified Hopfield Neural Network (MHNN) as a means to solve the shortest path problem. It uses every piece of information that is available at the peripheral neurons in addition to the highly correlated information that is available at the local neuron. Consequently, every neuron converges speedily and optimally to a stable state. The convergence is faster than what is usually found in algorithms that employ conventional Hopfield neural networks. Computer simulations support the indicated claims. The results are relatively independent of network topology for almost all source-destination pairs, which nay be useful for implementing the routing algorithms appropriate to multi -hop packet radio networks with time-varying network topology.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.250-254
• /
• 1989

This study is to develop the interactive program for work-cell layout of SCAPA type robot using PC. To make the program interactively, we made use of the software which have the function of menu, dialog box, and graphic. By using the mouse, we can progress the program quickly and easily. It has 2 1/2 dimension and provides that one can layout the elements(robot, peripheral device, and etc.), create the work path, and calculate the robot cycle time. By comparing with cycle times of any number of work-cell layout for the same work, we can evaluate work-cell layout and select one work-cell layout to be considered optimal one which has the least cycle time.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.473-478
• /
• 2004

This work presents the Thermal Hydraulic analysis has been performed for a 19-pin wire-spacer fuel assembly using three-dimensional Reynolds-averaged Navier-Stokes equations. SST model is used as a turbulence closure. The whole fuel assembly has been analyzed for one period of the wire-spacer using periodic boundary condition at inlet and outlet of the calculation domain. The overall results far a preliminary calculation show a good agreement with the experimental observations. It has been found that the major unidirectional flows are the axial velocity in sub-channels and the peripheral sweeping flows and the velocities are found to be following a cyclic path of period equal to the wire-wrap pitch. The temperature is found to be maximum in the central region and also, there exist a radial temperature gradient between the fuel rods. The major advantage of performing this kind of analysis is the prediction of thermal-hydraulic behavior of a fuel assembly with much ease.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.117-123
• /
• 1989

This study is to develop interactive program for work-cell layout of SACARA type robot by using PC. To make this program interactively, we made use of the software which has the function of menu, dialog box, and graphic. By using the mouse, we can progress this program quickly and easily. It has 2Y2 dimension and provides that one can layout elements (robot, peripheral device, and etc.), create work path, and calculate cycle time of working robot. By comparing with cycle times of any number of work-cell layout for same work, we can evaluate work-cell layout. Finally, we can select one work-cell layout to be considered optimal one which has the least cycle time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2048-2061
• /
• 1991

As compared with other cutting types, the ball end milling process causes a complexity in cutting system and a falling-off of machinability. In order to increase the productivity and efficiency in th NC machining of sculptured surfaces, this study carried out the qualitative linearized evaluation about the ball end milling system and applied their practical expressions to the technological processor at the cutter path planning stage. The evaluated expressions were proved to be adequate for practical use from an accuracy point of view and the estimation models were applied to sculptured surface machining processes for finding variable machining conditions. Consequently, it was recognized that variable machining conditions bring about the dispersion of force system and the reduction of machining time by more than 50%.