• 제목/요약/키워드: performance uniform

검색결과 1,543건 처리시간 0.023초

비정형 프리캐스트 초고강도 콘크리트 보의 설계 및 실험 평가 (Design and Experimental Evaluations of Non-Uniform Precast Ultra High-Strength Concrete Beams)

  • 김호연;조창근;강주원
    • 한국공간구조학회논문집
    • /
    • 제18권2호
    • /
    • pp.99-108
    • /
    • 2018
  • This paper presents the design, analysis, and experimental evaluations of precast reinforced UHPC (ultra high-performance concrete) beams with a new design concept of non-uniform flexural members. With outstanding mechanical properties of UHPC which can develop the compressive strength up to 200MPa, the tensile strengths up to 8~20MPa and the tensile strain up to 1~5%, a non-uniform structural shape of UHPC flexural beams were optimally designed using three-dimensional finite element analysis. The experiments were carried out and compared with the design strength in order to verify the performance of them. Proposed non-uniform UHPC beams were evaluated by a series of three-point beam loading test as well as estimated by design bending and shear strength of members. The newly designed UHPC beams show excellent performances not only in transverse load capacities but also in deformation capacities.

등각원형배열을 고려한 코히어런트 다중신호 방향탐지 기법 연구 (The Study of Direction Finding Algorithms for Coherent Multiple Signals in Uniform Circular Array)

  • 박철순;이호주;장원
    • 한국군사과학기술학회지
    • /
    • 제12권1호
    • /
    • pp.97-105
    • /
    • 2009
  • In this paper, the performance of AP(Alternating Projection) and EM(Expectation Maximization) algorithms is investigated in terms of detection of multiple signals, resolvability of coherent signals and the efficiency of sensor array processing. The basic idea of these algorithms is utilization of relaxation technique of successive 1D maximization to solve a direction finding problem by maximizing the multidimensional likelihood function. It means that the function is maximized over only for a single parameter while the other parameters are fixed at each step of the iteration. According to simulation results, the algorithms showed good performance for both incoherent and coherent multiple signals. Moreover, some advantages are identified for direction finding with very small samples and fast convergence. The performance of AP algorithm is compared with that of EM using multiple criteria such as the number of sensor, SNR, the number of samples, and convergence speed over uniform circular array. It is resulted AP algorithm is superior to EM overally except for one criterion, convergence speed. Especially, for EM algorithm there is no performance difference between incoherent and coherent case. In conclusion, AP and EM are viable and practical alternatives, which can be applied to a direction under due to the resolvability of multi-path signals, reliable performance and no troublesome eigen-decomposition of the sample-covariance matrix.

Interprocedural Transformations for Parallel Computing

  • Park, Doo-Soon;Choi, Min-Hyung
    • 한국멀티미디어학회논문지
    • /
    • 제9권12호
    • /
    • pp.1700-1708
    • /
    • 2006
  • Since the most program execution time is consumed in a loop structure, extracting parallelism from loop programs is critical for the taster program execution. In this paper, we proposed data dependency removal method for a single loop. The data dependency removal method can be applied to uniform and non-uniform data dependency distance in the single loop. Procedure calls parallelisms with only a single loop structure or procedure call most of other methods are concerned with the uniform code within the uniform data dependency distance. We also propose an algorithm, which can be applied to uniform, non-uniform, and complex data dependency distance among the multiple procedures. We compared our method with conventional methods using CRAY-T3E for the performance evaluation. The results show that the proposed algorithm is effective.

  • PDF

LCD모듈의 얼룩검사에 관한 연구 (A Study on the Spot Inspection for LCD Modules)

  • 이재혁
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.422-424
    • /
    • 2006
  • This paper suggests an automatic spot-inspection algorithm for LCD modules. Usually, LCD module testing is classified by two categories. One is for uniform pattern testing and the other is Non-uniform testing. The uniform pattern testing is well defined and also fully automated in the factory. However non-uniform pattern testing is not defined well yet, so non-uniform testing is conducted by human operators. In this paper a spot-pattern, which is one of non-uniform pattern, inspection algorithms are proposed. The performance of the proposed algorithm is tested by extensive simulations using artificial slot-patterns and real ones in the LCD modules.

  • PDF

Performance Analysis of UWB Systems in the Presence of Timing Jitter

  • Guvenc, Ismail;Arslan, Huseyin
    • Journal of Communications and Networks
    • /
    • 제6권2호
    • /
    • pp.182-191
    • /
    • 2004
  • In this paper, performances of different ultra-wideband (UWB) modulation schemes in the presence of timing jitter are evaluated and compared. Static and Rayleigh fading channels are considered. For fading channels, Oat and dispersive channels are assumed. First, bit error rate (BER) performances for each case are derived for a fixed value of timing jitter. Later, a uniform distribution of jitter is assumed to evaluate the performance of the system, and the theoretical results are verified by computer simulations. Finger estimation error is treated as timing jitter and an appropriate model is generated. Furthermore, a worst case distribution that provides an upper bound on the system performance is presented and compared with other distributions. Effects of timing jitter on systems employing different pulse shapes are analyzed to show the dependency of UWB performance on pulse shape. Although our analysis assumes uniform timing jitter, our framework can be used to evaluate the BER performance for any given probability distribution function of the jitter.

New Elements Concentrated Planar Fractal Antenna Arrays for Celestial Surveillance and Wireless Communications

  • Jabbar, Ahmed Najah
    • ETRI Journal
    • /
    • 제33권6호
    • /
    • pp.849-856
    • /
    • 2011
  • This research introduces three new fractal array configurations that have superior performance over the well-known Sierpinski fractal array. These arrays are based on the fractal shapes Dragon, Twig, and a new shape which will be called Flap fractal. Their superiority comes from the low side lobe level and/or the wide angle between the main lobe and the side lobes, which improves the signal-to-intersymbol interference and signal-to-noise ratio. Their performance is compared to the known array configurations: uniform, random, and Sierpinski fractal arrays.

소방시설의 내진설계를 위한 등재해도 스펙트럼 (Uniform Hazard Spectrum for Seismic Design of Fire Protection Facilities)

  • 김준경;정기신
    • 한국화재소방학회논문지
    • /
    • 제31권1호
    • /
    • pp.26-35
    • /
    • 2017
  • 미국 노스리지 지진(1994)과 일본 고베지진(1995) 발생 이후 다양한 구조물 및 건축물을 설계 할 때 성능기반 내진설계 개념을 적용하고 있다. 최근 국내 소방시설물에 대해서도 내진설계기준이 제정되어 내진설계 규정에 따라 적합하게 설계되어야 한다. 성능기반 설계가 도입되면서 구조물 중요도에 따라 기능수행, 즉시복구, 인명보호, 붕괴방지 등 각각의 성능에 적합한 연발생빈도의 등재해도 스펙트럼이 요구되고 있다. 확률론적 방법을 적용하여 국내 주요 5개 도시에 대해 등재해도 스펙트럼(uniform hazard spectrum)을 분석하였다. 지진 및 지체구조 관련된 전문가 패널은 10인이며 전문가 패널이 제시한 다수의 지진지체구조구 모델 및 다양한 지진동 감쇠식을 적용하였다. 분석대상 진동수는 (0.5, 1.0, 2.0, 5.0, 10.0) Hz이고 또한 PGA(최대지반가속도) 결과를 이용하여 500년, 1,000년 및 2,500년 등 3개 주요 성능기준에 해당하는 재현주기에 대해 등재해도 스펙트럼을 분석하였다. 민감도 분석에 의하면 지진지체구조 구 모델 변수보다 지반진동 감쇠식 변수가 지진재해도에 보다 큰 영향을 주는 것으로 분석되었다. 일반적으로 등재해도 스펙트럼은 10 Hz에서 최대 지진재해도를 보여 주었고, 기존 연구 및 관련 기술기준에 제시된 등재해도 스펙트럼의 수준 및 모양 특성과 대단히 유사하였다.

Comparison between uniform deformation method and Genetic Algorithm for optimizing mechanical properties of dampers

  • Mohammadi, Reza Karami;Mirjalaly, Maryam;Mirtaheri, Masoud;Nazeryan, Meissam
    • Earthquakes and Structures
    • /
    • 제14권1호
    • /
    • pp.1-10
    • /
    • 2018
  • Seismic retrofitting of existing buildings and design of earth-quake resistant buildings are important issues associated with earthquake-prone zones. Use of metallic-yielding dampers as an energy dissipation system is an acceptable method for controlling damages in structures and improving their seismic performance. In this study, the optimal distribution of dampers for reducing the seismic response of steel frames with multi-degrees freedom is presented utilizing the uniform distribution of deformations. This has been done in a way that, the final configuration of dampers in the frames lead to minimum weight while satisfying the performance criteria. It is shown that such a structure has an optimum seismic performance, in which the maximum structure capacity is used. Then the genetic algorithm which is an evolutionary optimization method is used for optimal arrangement of the steel dampers in the structure. In continuation for specifying the optimal accurate response, the local search algorithm based on the gradient concept has been selected. In this research the introduced optimization methods are used for optimal retrofitting in the moment-resisting frame with inelastic behavior and initial weakness in design. Ultimately the optimal configuration of dampers over the height of building specified and by comparing the results of the uniform deformation method with those of the genetic algorithm, the validity of the uniform deformation method in terms of accuracy, Time Speed Optimization and the simplicity of the theory have been proven.

Power and Trim Estimation for Helicopter Sizing and Performance Analysis

  • Laxman, Vaitla;Lim, Jae-Hoon;Shin, Sang-Joon;Ko, Kwang-Ho;Jung, Sung-Nam
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제12권2호
    • /
    • pp.156-162
    • /
    • 2011
  • The preliminary design stage of helicopters consists of various operations and in each operation design several detailed analysis tasks are needed. The analysis tasks include performance and the required power estimation. In helicopter design, those are usually carried out by adopting the momentum theory. In this paper, an explicit form of computational analysis based on the blade element theory and uniform/non-uniform inflow model is developed. The other motivation of the present development is to obtain trim and required power estimation for various helicopter configurations. Sectional and hub loads, power, trim, and flapping equations are derived by using a symbolic tool. Iterative computations are carried out till convergence is achieved in the blade response, inflow, and trim. The predictions regarding the trim and power estimation turn out to be correlated well with the experimental results. The effect of inflow is further investigated. It is found that the present prediction for the lateral cyclic pitch angle is improved with the non-uniform inflow model as compared to that by the uniform inflow model. The presently improved trim and power estimation will be useful for future helicopter sizing and performance analysis.

Lossy Source Compression of Non-Uniform Binary Source via Reinforced Belief Propagation over GQ-LDGM Codes

  • Zheng, Jianping;Bai, Baoming;Li, Ying
    • ETRI Journal
    • /
    • 제32권6호
    • /
    • pp.972-975
    • /
    • 2010
  • In this letter, we consider the lossy coding of a non-uniform binary source based on GF(q)-quantized low-density generator matrix (LDGM) codes with check degree $d_c$=2. By quantizing the GF(q) LDGM codeword, a non-uniform binary codeword can be obtained, which is suitable for direct quantization of the non-uniform binary source. Encoding is performed by reinforced belief propagation, a variant of belief propagation. Simulation results show that the performance of our method is quite close to the theoretic rate-distortion bounds. For example, when the GF(16)-LDGM code with a rate of 0.4 and block-length of 1,500 is used to compress the non-uniform binary source with probability of 1 being 0.23, the distortion is 0.091, which is very close to the optimal theoretical value of 0.074.