• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.275-278
• /
• 2000

This paper focuses on a performance analysis model for optimizing the freight terminal design and layout using AutoMod simulator and numerical analysis. We developed a model to analyze the freiht terminal performance per unit time and the material handling cost based on both throughput and waiting due to conjestion. We developed computer program for this model and some sample results by both numerical method and AutoMod simulator are compared.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.507-510
• /
• 1998

Performance of AMLCD pixels depends on the electrical characteristics of thin film transistor switches. The high quality of LCD can be obtained by minimizing the process and device variations of TFT. The effect of process and device factors on poly-Si TFT characteristics are calculated by ATHENA and ATLAS, and the optimized design windows based on statistical design of experiment are suggested for high performance 20 inch LCD are suggested for high performance 20 inch LCD monitors.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.43-47
• /
• 2003

The performance of the Radwaste System is measured in terms of generation of waste volumes, the release of radioactive materials to the environment and the occupational radiation exposure to workers. Based on our design and operating experience from PWR plants, various design goals for liquid radwaste system were developed to improve system performance. It has been making continuous effort to develop the advanced liquid radwaste processing technology for new PWR plants since 1998. The primary goal of this effort was to obtain better performance and to design a more economical liquid radwaste system. This paper describes lesson learned experience from design of the liquid radwaste system in Korea Nuclear Power Plants.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.159-168
• /
• 2002

In this paper, a study on the design of the transmitter-receiver of fuze sensor for discriminating target position is presented. We propose the algorithm for detecting target distance/direction through investigating the operational concept and principle of fuze sensor. Based on the algorithm, We design transmitter-receiver, calculate various design variables and estimate the performance of that one. The estimated result shows that the required performance of fuze sensor is satisfied. Further research on confirming the performance of proposed algorithm through encounter simulation test with real target and resolving problem will be continued.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.131-137
• /
• 2009

본 연구에서는 AMCA Standard 500-D-98과 관련하여 여러 시험의 조건 중 제연댐퍼의 누설량을 측정하고자 한다. 이에 본 연구의 결과로서 설계, 도면검토, 성능검사에 공학적 시험자료를 이용한 제연댐퍼의 누설량 성능곡선도 등을 적용하여 제연시스템의 올바른 설계법과 검사법을 정립하여 기술에 대한 이해와 성능이 확보되도록 한다. 또한 성능곡선도의 성능판단에 의한 댐퍼의 선정으로 댐퍼의 품질 개선을 유도하여 제연시스템의 성능을 향상시켜 신뢰성 있는 성능위주설계의 제연시스템을 구축하고자 한다. 제연댐퍼 누설량 시험을 한 결과 시험장치의 크기는 시험하는 제품의 규격, 성능에 따라 결정되므로 먼저 제품의 성능 등급을 설정하여 크기를 결정하여야 하며, 모든 시스템의 성능은 계측에 의하여 판단되므로 측정 값의 신뢰도 확보는 최우선 되어야 하며, 제연댐퍼의 시험방법에 따라 신뢰도를 부여할 수 있는 시험횟수와 시험해야 할 수량에 대하여 충분한 검토 결과에 따른 설정이 필요하다.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.9-17
• /
• 2016

Building information modeling refers to combination or set of technologies and organizational solutions that are expected to increase collaboration in the construction industry and to improve the productivity and quality of the design, construction, and maintenance of buildings. For enhanced communication among project participants, various information which BIM model usually includes is provided, furthermore data which contain exchange of unstructured information is needed. If the extension of BIM standard file format for practical use of design Issue information about collaborative design process is fulfilled, the productivity and quality of design will be improved.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.91-97
• /
• 2017

Purpose: Various studies on a light shelf are in progress, but it has the problem of glare occurrence. The present study suggested a diffusion film as the method for resolving the glare problem, and aimed to establish light shelf-related basic data by conducting the performance evaluation of a light shelf depending on the installation position of the diffusion film. Method: To carry out the light shelf performance evaluation depending on the diffusion film installation position, three cases were established: no diffusion film installation (Case 1), diffusion film installation on the reflector (Case 2), and diffusion film installation on the upper glass surface of the window for light shelf installation (Case 3); and the energy reduction performance, luminance, and luminance contrast were analyzed based on a testbed. Result: The conclusions of this study are as follows. 1) When the diffusion film was applied, the amount of light introduced through the light shelf decreased, and the average indoor illumination decreased accordingly. 2) For Case 3, the lighting energy reduction performance was identical to the lighting energy reduction efficiency of the existing light shelf; and for Case 2, it was found to be inappropriate as the lighting energy consumption increased compared to that of the existing light shelf. 3) The analysis of the glare for the cases established in this study showed that the luminance contrast was low for Case 3, and thus the glare problem could be minimized. 4) The specific angle of the light shelf could induce the glare problem by increasing the luminance depending on the external condition. 5) Based on the aforementioned contents, the installation position of the diffusion film for improving the lighting performance and glare problem of the light shelf was found to be the upper glass surface of the window for light shelf installation.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.115-132
• /
• 2007

The purpose of this research is that to study of musical performer's purchasing behavior, satisfaction and design preference, and to give the information for better performance costume market based on that result. The target for the survey is limited only for above 4th grade female students and have experienced more than three times of performances. Total 364 questionnaires are used for this research. The SPSS was used for the analysis. The results were, first, in the survey of place of purchasing, specialty shop for musical performance shop was the most. The most group for the budget that they spent was under 100,000 Won. Rational price for costume would be 150,000-300,000 Won. Most people purchase costume before 2 weeks and compare 3-4 stores mostly. There were not many complaints about being comfort for costume itself. The preference for costume was different depends on not only scale of performance but also whether solo, duet or trio or more. Also harmony with other person costume was most consideration factor when they perform duet or more. For the choice of shop factor following were considered the most important; various selections, kindness of sales persons and possibility for trying various costumes. However, locations of shop or delivery service were not important relatively. For the choice of costume factor, design color, comfort and functionality were considered the most important but price, quality and decoration were not. For 'the satisfaction after purchase costume' factor, people's opinions, best appearance on the stage and meeting image with themselves were considered the most important. Second, on the subject for 'design preference of costume based on type of performance', people chose different color of dress depends on what types of performance. In case of solo, they prefer vivid primary color; in case of trio or more, they prefer black; in case of duet, they prefer pastel tone. As for preference of sleeve design, all of them prefer non-sleeve type.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.577-580
• /
• 1996

LQ-servo is a stability-robustness guaranteed multivariable controller design method based on the LQR structure to improve command following performance with output feedback. In this paper, a new type of PI controller based on LQ-servo is introduced. Then, Command following performance is improved using the limiting behavior of the control gain and weighting factors on the low frequency part of design parameter Q that is the state weighting matrix in the cost function.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.789-794
• /
• 2001

In this study, a program for the off-design performance prediction of multi-stage axial-compressors is developed based on stage-stacking method. To account for the increased losses at off-design conditions, generalized performance curve is applied. The purpose of this study is to investigate the influence of the choice of generalized performance curve and stator exit angle. For this purpose, we tested various generalized performance curves and stator exit angles. In conclusion, Muir's pressure coefficient curve gives a good prediction results regardless of the efficiency curve for a low-stage compressors. On the other hand, for high-stage compressors, The combination of Muir's pressure coefficient curve and Stone's efficiency curve gives a optimistic results. Stator exit angle has a small effect on overall performance curve.