• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.199-208
• /
• 2017

We perform an experiment on lacquer formation with simple test device. The anti-lacquer is one of important issues to increase durability, and to improve performance in the engines because the lacquer formation cause sticking of fuel injection pump, scuffing of cylinder liners, and increase of lubricant oil consumption in the marine diesel engines. We suggest this simple test in order to save enormous experimental cost in marine diesel engines, and in order to have ease in performing the various tests. The influences of the Base Number (BN) of lubricant oils and the sulfur content of fuel oils in the formation of lacquer are investigated. In order to investigate physical and chemical properties of lacquer, we perform a variety of tests such as, visual inspection, EDS. In addition, we investigate adhesion of lacquer by pull-off test quantitatively, and perform dissolution test with dilute sulfuric acid.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1722-1732
• /
• 1997

In this paper, we propose a coding method of remotely sensed satellite image data using region classification and interband correlation. This method classifies each pixel vector consider spectral characteristics. Then we perform the classified intraband VQ to remove spatial (intraband redundancy for a reference band image. To remove interband redundancy effectively, we perform the classified interband prediction for the band images that the high correlation spectrally and perform the classified interband VQ for the remaining band images. Experiments on LANDSAT TM image show that the coding efficiency of the proposed method is better than that of the conventional Gupta's method. Especially, this method removes redundancies effectively for satellite iamge including various geographical objects and for and images that have low interband correlation.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.33-37
• /
• 2005

One of the most important feature of the Mobile Manipulator is redundant freedom. Using the redundant freedom, Mobile Manipulator can move various mode, perform dexterous motion. In this paper, to improve robot job ability, as two robots perform a job in co-operation control, we studied optimal position and posture of Mobile Manipulator with minimum movement of each robot joint. Kinematics of mobile robot and task robot is solved. Using mobility of Mobile robot, weight vector of robots is determined. Using Gradient methode, global motion trajectory is minimized. so the job which Mobile Manipulator perform is optimized. The proposed algorithm is verified with PURL-II which is Mobile Manipulator combined Mobile robot and task robot. and discussed the result.

• 한국컴퓨터산업학회논문지
• /
• 제10권1호
• /
• pp.21-28
• /
• 2009

역할-기반 접근 제어 정책의 경우 조직의 보안 정책을 보다 효율적이고 일관성 있게 관리할 수 있지만 각 역할의 계층에 의하여 권한의 상속이 결정된다. 이 경우, 하위 개념의 역할은 상위 개념의 역할이 가지는 권한을 수행 하여야 하는 경우에 적절히 대처할 수 없고 하위 개념의 역할에 필요한 새로운 권한을 추가해야만 하고 추가되는 권한은 관리자의 권한 제거 작업 이전까지 하위 역할에 귀속되는 문제가 발생한다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 역할이 가지는 권한의 일시적인 위임을 통하여 이를 해결하고자 한다. 이를 위하여 권한의 위임을 수행하기 위한 정책과 새로운 역할-권한 관계의 정의, 권한 위임을 위한 새로운 프로토콜을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.509-521
• /
• 2021

In this paper, from a review of the size distribution of the bubbles during pool scrubbing obtained from experiments by EPRI, we apply the bubble size distributions to analyses on the decontamination factors of pool scrubbing via I-COSTA (In-Containment Source Term Analysis). We perform sensitivity studies of the bubble size on the various mechanisms of deposition of aerosol particles in pool scrubbing. We also perform sensitivity studies on the size distributions of the bubbles depending on the diameters at the nozzle exit, the molecular weights of non-condensable gases in the carrier gases, and the steam fractions of the carrier gases. We then perform analyses of LACE-ESPANA experiments and compare the numerical ~ results to those from SPARC-90 and experimental results in order to show the effect of the bubble size distributions.

• 센서학회지
• /
• 제32권3호
• /
• pp.180-186
• /
• 2023

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.5-9
• /
• 1998

Various successful TQM procedures have contributed to solve the problems in actual business, but recently it is required to more speedily perform the improvement activity and to challenge solving foreseen latent engineering problems in addition to existing ones. This paper proposes a new scientific methodology which enables us to perform the requirements and to improve the principle of TQM. The performance of the proposed method is illustrated through same practical studies.

• Journal of the Korean Data and Information Science Society
• /
• 제18권1호
• /
• pp.11-16
• /
• 2007

Since the seminal work of Engle (1982), many researchers and practitioners have developed ARCH-type models to deal with volatility modelling, which, for instance, is crucial to perform the task of derivative pricing, measuring risk, and risk hedging. In this paper, we base the GARCH(1,1) model to analyze the KOSPI200 data, and perform the CUSUM test for detecting parameter changes in the GARCH model. It is shown that the data suffers from a parameter change.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.63-66
• /
• 2003

The effect of punching density and material composition on the tensile properties and optimum condition of manufacturing of carbon needle punched perform was studies. The interlaminar tensile strength were increased but the intralaminar tensile strength were decreased with increasing punching density. In the case of the performs composed of continuous oxi-PAN fabrics, there was a considerable improvement of the interlaminar and intralaminar tensile strength.

• 연구논문집
• /
• 통권32호
• /
• pp.111-120
• /
• 2002

In this paper, the design of a decatizing cylinder with uniformly distributed pressure in a decatizing system is investigated by using the Finite Element Method. Particularly, since deflection of a cylinder will not perform to iron the fabrics, the cylinder design insuring uniform pressure is very important. In this paper proposed two improved cylinder model obtained by changing the support type of the bean and the support location. And perform optimization with two improved cylinder model.