• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.247-258
• /
• 2003

In this paper, we present a pen-shaped input device equipped with accelerometers and gyroscopes that measure inertial movements when a user writes on 2 or 3 dimensional space with the pen. The measurements from gyroscope are integrated once to find the attitude of the system and are used to compensate gravitational effect in the accelerations. Further, the compensated accelerations are integrated twice to yield the position of the system, whose basic concept stems from the field of inertial navigation. However, the accuracy of the position measurement significantly deteriorates with time due to the integrations involved in recovering the handwriting trajectory This problem is common in the inertial navigation system and is usually solved by the periodic or aperiodic calibration of the system with external reference sources or other information in the filed of inertial navigation. In the presented paper, the calibration of the position or velocity is performed on-line and off-line. In the on-line calibration stage, the complementary filter technique is used, where a Kalman filter plays an important role. In the off-line calibration stage, the constant component of the resultant navigational error of the system is removed using the velocity information and motion detection algorithm. The effectiveness and feasibility of the presented system is shown through the experimental results.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.870-878
• /
• 2012

Recently, very rapid development of computer and sensor technologies induces various kinds of user interface (UI) technologies based on user experience (UX). In this study, we investigate and develop a smart touch projector system technology on the basis of IR sensor and image processing. In the proposed system, a user can control computer by understanding the control events based on gesture of IR pen as an input device. In the IR image, we extract the movement (or gesture) of the devised pen and track it for recognizing gesture pattern. Also, to correct the error between the coordinate of input image sensor and display device (projector), we propose a coordinate correction algorithm to improve the accuracy of operation. Through this system technology as the next generation human-computer interaction, we can control the events of the equipped computer on the projected image screen without manipulating the computer directly.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.347-358
• /
• 2010

This paper presents a measurement system for 3D hand-drawn gesture motion. Many pen-type input devices with Inertial Measurement Units (IMU) have been developed to estimate 3D hand-drawn gesture using the measured acceleration and/or the angular velocity of the device. The crucial procedure in developing these devices is to measure and to analyze their motion or trajectory. In order to verify the trajectory estimated by an IMU-based input device, it is necessary to compare the estimated trajectory to the real trajectory. For measuring the real trajectory of the pen-type device, a PHANToMTM haptic device is utilized because it allows us to measure the 3D motion of the object in real-time. Even though the PHANToMTM measures the position of the hand gesture well, poor initialization may produce a large amount of error. Therefore, this paper proposes a calibration method which can minimize measurement errors.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.4 no.1
• /
• pp.85-102
• /
• 1980

Accepting the necessity for maintaining the objectives of the existing circulation system, the computer-based system could be designed by the system analyst and librarians to gain a variety of improvements in the maintenance, accessibility of circulation records and more meaningful statistical records. If the terminal can be operated on-line, then this circulation data is transmitted directly to the computer, where it may update to the circulation file immediately or alternatively be kept in direct access file for updating in batch mode. on-line system in the circulation operations is "data-collection system" and "Bar-coded label system" Bar-coded label system is simple, quick, and error-free input of data. Attached to CRT terminal is a "light pen" which is hand held and will read a bar-coded label as the pen is passed over the labels (one affixed to the book itself, other carried on the borrower cards). Instantaneously the data concerning transaction is stored in the central mini-computer. It is useful, economical for us to co-operate many libraries in Korea and design borrower's ID code, book no., classification code in the Bar-coded label system by the members of the computer center and the library staff at every stage. As for book loan, the borrowers ID code, book number and classification code are scanned by the bar-code scanner or light pen and the computer decides whether to loan and store the data. The visual display unit shows the present status of a borrowers borrowing and decides whether borrower can borrow.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.131-134
• /
• 2002

As the increased use of computer, wired/wireless/mobile Internet, security in using Internet becomes a more important problem. Thus, biometric technology using physical and behavior characteristics of a person is hot issue. Many different types of biometric technologies of a person such as fingerprint, face, iris, vein, DNA, brain wave, palm, voice, dynamic signature, etc. had already been studied but remained unsuccessful because they do not meet social demands. However, recently many of these technologies have been actively revived and researchers have developed new products on various commercial fields. Dynamic signature verification technology is to verify the signer by calculating his writing manner, speed, angle, and the number of strokes, order, the down/up/movement of pen when the signer input his signature with an electronic pen for his authentication. Then signature verification system collects mentioned above various feature information and compares it with the original one and simultaneously analyzes to decide whether signature is forgery or true. The prospect of signature verification technology is very promising and its use will be wide spread in terms of economy, security, practicality, stability and convenience.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2005

Mobile internet access using such devices as PDAs and cellular phones becomes popular as mobile technologies grow. However, the characteristics of small screen devices such as small screen size and pen-based input cause many usability problems. In this study, a human factors experiment was conducted to identify the factors affecting the usability of information search on a PDA. Factors manipulated in the experiment included use of wheel equipment, scroll dimension, and screen orientation. Task completion time, error frequency, and subjective satisfaction level were measured. In addition, various users' behavioral patterns such as scanning routes and mainly used scrolling methods were analyzed. Scroll dimension has a significant effect on task completion time. Scroll equipment and screen orientation affect subjective satisfaction level. The results could be applied to designing information structure of web sites for mobile use by providing vertical scroll and using external scroll equipments.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.177-183
• /
• 2016

The daily report includes the most detailed information and various daily planning and performance data recorded at a site, and includes work types, the number of workers, and the equipment and materials used. However, in the daily reporting process, some information can be omitted or distorted or even made redundant due to there being several steps of manual input. For this reason, the daily report is utilized for a simple report rather than for an appropriate purpose. Thus, to resolve the issues of the existing daily report system mentioned above, a daily report system using a digital pen was developed and then applied to an actual construction site to verify its applicability. As a result, it was found that 96.610% recognition accuracy of handwritten letters could be achieved. In addition, it was no longer necessary to enter the same information multiple times and no additional training or education for using a mobile device was needed. The digital pen-based daily report program developed in this study is expected to contribute to an improvement of information management efficiency and site document management work by addressing the problems of the existing report system.

• Journal of Information Display
• /
• v.3 no.2
• /
• pp.19-25
• /
• 2002

In this paper, a new target extraction algorithm is proposed, in which the coordinates of target are obtained adaptively by using the difference image information and the optical BPEJTC(binary phase extraction joint transform correlator) with which the target object can be segmented from the input image and background noises are removed in the stereo vision system. First, the proposed algorithm extracts the target object by removing the background noises through the difference image information of the sequential left images and then controlls the pan/tilt and convergence angle of the stereo camera by using the coordinates of the target position obtained from the optical BPEJTC between the extracted target image and the input image. From some experimental results, it is found that the proposed algorithm can extract the target object from the input image with background noises and then, effectively track the target object in real time. Finally, a possibility of implementation of the adaptive stereo object tracking system by using the proposed algorithm is also suggested.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.161-166
• /
• 2004

Electronic Ink is a stored data in the form of the handwritten text or the script without converting it into ASCII by handwritten recognition on the pen-based computers and Personal Digital Assistants(PDA) for supporting natural and convenient data input. One of the most important issue is to search the electronic ink in order to use it. We proposed and implemented a script matching algorithm for the electronic ink. Proposed matching algorithm separated the input stroke into a set of primitive stroke using the curvature of the stroke curve. After determining the type of separated strokes, it produced a stroke feature vector. And then it calculated the distance between the stroke feature vector of input strokes and one of strokes in the database using the dynamic programming technique.