• Journal of Veterinary Science
• /
• 제21권2호
• /
• pp.14.1-14.10
• /
• 2020

African swine fever (ASF) is a highly contagious disease of domestic pigs and wild boars (WBs). Without a vaccine, early antibody and antigen detection and rapid diagnosis are crucial for the effective prevention of the disease and the employment of control measures. In Sardinia, where 3 different suid populations coexisted closely for a long time, the disease persists since 1978. The recent ASF eradication plan involves more stringent measures to combat free-ranging pigs and any kind of illegality in the pig industry. However, critical issues such as the low level of hunter cooperation with veterinary services and the time required for ASF detection in the WBs killed during the hunting season still remain. Considering the need to deliver true ASF negative carcasses as early as possible, this study focuses on the evaluation and validation of a duplex pen-side test that simultaneously detects antibodies and antigens specific to ASF virus, to improve molecular diagnosis under field conditions. The main goal was to establish the specificity of the two pen-side tests performed simultaneously and to determine their ability to detect the true ASF negative carcasses among the hunted WBs. Blood and organ samples of the WBs hunted during the 2018/2019 hunting seasons were obtained. A total of 160 animals were tested using the pen-side kit test; samples were collected for virological and serological analyses. A specificity of 98% was observed considering the official laboratory tests as gold standards. The new diagnostic techniques could facilitate faster and cost-effective control of the disease.

• 마이크로전자및패키징학회지
• /
• 제24권4호
• /
• pp.79-84
• /
• 2017

태양전지와 같은 광전소자의 특성 및 신뢰성 유지하기 위해서는 수분과 산소 등으로 부터 소자 내부가 보호되어야 한다. 본 연구는 여러 연성(flexible) 플라스틱 기판위에 유 무기 복합 보호막을 스프레이코팅 방법으로 형성하여 공정조건(노즐 위치, 박막 두께, 기판 구성)에 따른 소자의 보호특성을 연구하였다. 사용된 복합 보호막 재료로서 PVA (polyvinyl alcohol)와 SA(sodium alginate) 혼합 유기 물질(P.S)에 $Al_2O_3$($P.S+Al_2O_3$)과 $SiO_2$($P.S+SiO_2$) 나노 분말을 혼합하여 유 무기 복합 보호막 용액을 합성하였다. 플라스틱 기판 위에 코팅한 보호막의 두께가 $5{\mu}m$에서 91%의 투과율을 나타내었으며 $78{\mu}m$에서 $178{\mu}m$로 두께가 증가할 경우 광 투과율은 81.6%에서 73.6%으로 감소하였다. 또한 합성한 $P.S+Al_2O_3$ 복합재료를 사용하여 PEN(polyethylene naphthalate), PC(polycarbonate) 단일 플라스틱 기판과 Acrylate film과 PC 이중막(Acrylate film/PC double layer) 구조와 $Al_2O_3$ 무기박막과 PEN 이중막($Al_2O_3$ film/PEN double layer) 구조의 기판 위에 $P.S+Al_2O_3$ 용액을 사용하여 수분투과도(water vapor transmission rate, WVTR)와 표면형상 등을 측정하여 최적의 보호막 구조를 확인하였다. 즉, $Al_2O_3$ film/PEN 이중막 기판위에 형성한 보호막의 수분투과 값은 $0.004gm/m^2-day$로 가장 우수한 내 투습 특성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.396-396
• /
• 2012

$TiO_2$ anatase nanotube arrays (NTAs) were grown by electrochemical anodization and followed annealing of Ti foil. Ethylene glycol/$NH_4F$-based organic electrolyte was used for electrolyte solution and using second anodization process to obtain free-standing NTAs. After obtaining NTAs, ITO film was deposited by sputtering process on bottom of NTAs. UV-curable NOA was used for attach free-standing NTAs on flexible plastic substrate (PEN). Solid state electrolyte (spiro-OMeTAD) was coated via spin-coating method on top of attached NTAs. Ag was deposited as a counter electrode. Under AM 1.5 simulated sunlight, optical characteristics of devices were investigated. In order to use flexible polymer substrate, processes have to be conducted at low temperature. In case of $TiO_2$ nano particles (NPs), however, crystallization of NPs at high temperature above $450^{\circ}C$ is required. Because NTAs were conducted high temperature annealing process before NTAs transfer to PEN, it is favorable for using PEN as flexible substrate. Fabricated flexible solid-state DSSCs make possible the preventing of liquid electrolyte corrosion and leakage, various application.

• 정보교육학회논문지
• /
• 제11권1호
• /
• pp.107-116
• /
• 2007

전자펜을 이용한 문서교정 시스템에서 정확한 교정결과를 보장하기 위해서는 문서 교정자가 드로잉한 교정부호와 문서내용간의 영역 모호성(ambiguity)을 해결하여야 한다. 한편 교정의 대상이 되는 전자문서가 HTML/XML과 같은 경우 교정된 문서구조가 반드시 기 정의된 DTD를 위배하지 않아야 한다. 본 논문에서는 펜 기반의 교정시스템에서 교정부호(마킹)와 대상문서간의 모호성 문제를 최소화하기 위한 기법을 제안한다. 제안 인터페이스에서는 모호성 문제를 최소화하기 위하여 교정부호와 문서간의 컨텍스트(Context)를 반영하였으며 동시에 대상문서의 문서 구조를 유지하기 위한 방법을 제공한다. 그 결과 본 논문에서 제안한 교정 인터페이스는 기존 교정시스템에 비하여 보다 정확한 영역정보를 포함할 수 있으며, 교정부호 입력에 따른 구조문서 변경시에도 원본문서의 DTD에 따르는 문서구조를 유지할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.123-123
• /
• 2015

Al doped ZnO(AZO) films as a transparent conductive oxide (TCO) electrode were deposited on glass, polyethylene naphthalate (PEN) and polyethylene terephthalate (PET) at room temperature by a conventional rf-magneton sputtering (CMS) and a facing target sputtering (FTS) using Al2O3 and ZnO targets. In order to investigation of AZO properties, the structural, surface morphology, electrical, and optical characteristics of AZO films were respectively analyzed. The resistivities of AZO films using FTS system were $6.50{\times}10-4{\Omega}{\cdot}cm$ on glass, $7.0{\times}10-4{\Omega}{\cdot}cm$ on PEN, and $7.4{\times}10-4{\Omega}{\cdot}cm$ on PET substrates, while the values of AZO films using CMS system were $7.6{\times}10-4{\Omega}{\cdot}cm$ on glass, $1.20{\times}10-3{\Omega}{\cdot}cm$ on PEN, and $1.58{\times}10-3{\Omega}{\cdot}cm$ on PET substrates. The AZO-films deposited by FTS system showed uniform surface compared to those of the films by CMS system. We thought that the films deposited by FTS system had low stress due to bombardment of high energetic particles during CMS process, resulted in enhanced electrical conductivity and crystalline quality by highly c-axis preferred orientation and closely packed nano-crystalline of AZO films using FTS system.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.18-23
• /
• 2002

The structure development and dynamic properties of fibers produced by high-speed spinning of P(EN-ET) random copolymers were investigated. The as-spun fibers were found to remain amorphous up to the spinning speed of 1500 m/min, and subsequent increases in speed resulted in the crystalline domains containing primarily $\alpha$ crystalline modification of PEN. The f modification was not found up to spinning speeds of 4500 m/min. On the other hand, annealing of constrained fibers spun at the 2100 m/min at 180,200, and 240^{\circ}C$ exhibited $\beta$-form crystalline structure, while the annealed fibers spun in 600-1500 m/min range exhibited dominantly $\alpha$-form. However $\beta$-form crystals disappeared above the spinning speed of 3000 m/min. With increasing spinning speeds from 600 to 4500 m/min, the storage modulus of as-spun fibers increased continuously and reached a value of about 10.4 spa at room temperature. The tan $\delta$curves showed the $\alpha$-relaxation peak at about 155-165^{\circ}C$, which is considered to correspond to the glass transition. The $\alpha$-relaxation peaks became smaller and broader, and shift to higher temperatures as the spinning speed increases, meaning that molecular mobility in the amorphous region is restricted by increased crystalline domain.

• 한국식품영양학회지
• /
• 제11권4호
• /
• pp.394-401
• /
• 1998

In present work, the development of processing for various fermented sea foods using low-usefulness marine resources were investigated. The optimum temperatures of autolysis were 35$^{\circ}C$ for hair tail, 45$^{\circ}C$ for gizzard shad, 30$^{\circ}C$ for kangdale, 30$^{\circ}C$ for pen shell and 30$^{\circ}C$ for oyster and when alcalse(Novo Co.) were added, optimum temperatures were 60$^{\circ}C$, 50$^{\circ}C$, 50$^{\circ}C$, 50$^{\circ}C$ and 50$^{\circ}C$, respectively, and protease N, P. (Pacific chem. enzyme mixture 2,000) were 55$^{\circ}C$, 60$^{\circ}C$, 50$^{\circ}C$, 50$^{\circ}C$ and 50$^{\circ}C$, respectively. Especially although exozymes and endozymes reacted at same time, hydrolysis rate of raw materials got to maximum at optimum temperatures of exozymes. The facts showed that exozymes dominated the hydrolysis reached max8imum at pH 9.0, and optimum hydrolysis time of all raw materials were 6 hours. And the optimum concentrations of exozymes were about 3.0% for hair tail, 4.5% for gizzard shad, 3.5% for kangdale, 3.0% for pen shell and 3.0% for oyster, respectively.

• 한국식품영양학회지
• /
• 제11권4호
• /
• pp.402-408
• /
• 1998

A rapid processing method for fermented sauce of favorable flavor was investigated with low-usefulness marine resources. Hydrolyzed at optimal conditions for 6 hours usuing alcalase, and separated by molecularporous membrane. It's very effective for remove bitter taste at below M.W. 100 dalton, and effective at below M.W.500 dalton. Added 2% invert sugar in fermented sauce at below M.W.500 dalton, and thermal treatment at 100$^{\circ}C$ for 30 minutes were improved flavor. Chemical composition of fermented sauce using hair tail were 80.7% of moisture, 2.2% of carbohydrate, 1.8% of total nitrogen, 1.6% of amino nitrogen and pH was 6.5. The ratio of amino nitrogen in total nitrogen was 77.8%. And chemical composition of fermented sauce used gizzard shad, kangdale, pen shell and oyster were similar to fermented sauce used hair tail. Total nitrogen were above 1.8% and the ratio of amino nitrogen in total nitrogen was 77.7∼84.2% in all fermented sauce. Amino acid contents in fermented sauce used hair tail, gizzard shad, kangdale, pen shell and oyster were 4,318.1mg%, 4,681.3mg%, 3,156.2mg% and 4,175.0mg%, respectively. And the predominant free amino acid were glutamic acid, lysine and glycine in all fermented sauce.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.961-968
• /
• 2009

In this work, transparent conductive oxide(TCO) films such as $In_2O_3-SnO_2$(ITO) and $In_2O_3-ZnO$(IZO) were prepared on polyethylene naphthalene(PEN) and glass substrates by using rf-magnetron sputtering system. The TCO films deposited on PEN substrate show very poor conductivity as compared to that of the TCO films deposited on glass substrates. From the results of the residual gas analysis(RGA) test, this poor stability of plastic substrate is presumed to be caused by the deteriorated adhesion between the TCO films and the plastic substrate due to outgassing from the plastic substrate during deposition of TCO films. From our experiment, it is found that the vaporization of some defects in the plastic substrates deteriorate the adhesion of the TCO films to the plastic substrate, because the most plastic substrates containing the water vapor and/or other adsorbed particles such as organic solvents. Mixing of these gases vaporized in the sputtering process will also affect the electrical property of the deposited TCO films. Inorganic thin composite $(SiO_2)_{40}(ZnO)_{60}$ film as a gas barrier layer is coated on the PEN substrate to protecting the diffusion of vapors from the substrate, so that the TCO films with an improved quality can be obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.163-168
• /
• 2008

Photonic crystal structures have been received considerable attention due to their high optical sensitivity. One of the techniques to construct their structure is the dip-pen lithography (DPN) process, which requires a nano-scale resolution and high reliability. In this paper, we propose a two dimensional photonic crystal array to improve the sensitivity of optical biosensor and DPN process to realize it. As a result of DPN patterning test, we have observed that the diffusion coefficient of the mercaptohexadecanoic acid (MHA) molecule ink in octanol is much larger than that in acetonitrile. In addition, we have designed and fabricated optical waveguides based on the mach-zehnder interferometer (MZI) for application to biosensors. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The MZI optical waveguides were measured of the optical characteristics for the application of biosensor.