• 태양에너지
• /
• 제11권1호
• /
• pp.41-49
• /
• 1991

본 연구에서는 기판의 증착온도를 $200{\pm}5[5^{\circ}C]$로 유지하여 진공증착법으로 (P)SiC/(N)Si 태양전지를 제작하고 그의 특성을 조사하였다. SiC 박막의 최적 두께 $1.2[{\mu}m]$는 박막두께와 변환효율과의 관계로부터 정해졌고 태양전지의 특성은 열치리에 의하여 개선되었다. 최적조건의 열처리 온도와 시간은 $420[^{\circ}C]$에서 12분이고 분광응답의 피크값은 열처리 온도의 증가와 더블어 장파장 쪽으로 이동함을 알았다. X선 회절분석 및 SEM검사는 열처리 온도와 시간에 따라 SiC 박막내에서 결정성장을 보여주며 $2.5{\times}1[cm^2]$의 태양전지에서 최고 변환효율은 11.7[%]이다.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.185-195
• /
• 2015

병원에서 특정 시각 대에 집중하는 외래환자 접수상황을 효과적으로 해당 진료과에 전달하는 기술적 방식이 기존의 병원 접수시스템에 부재하다. 따라서 모든 진료과는 접수상황을 알기위해서 병원접수 데이터베이스 전체를 반복적으로 순차탐색하게 되고 이는 병원정보시스템 성능저하의 큰 요인이 된다. 따라서 본 논문에서는 이러한 병원 접수시스템의 효율 향상을 위해 웹소켓을 이용한 주키전송 일괄처리시스템과 접수정보전송에 의한 실시간시스템을 개발하였다. 주키전송 일괄처리시스템은 기존의 순차탐색시스템에 비해 데이터베이스 조회속도를 크게 단축하였을뿐만 아니라 접수환자 수에 무관한 빠른 조회속도를 유지하였다. 또한, 접수정보전송 실시간시스템은 데이터베이스를 조회하지 않고도 기존의 요청/응답 접수시스템의 대기환자 갱신시간을 효과적으로 줄일 수 있었다.

• 한국인구학
• /
• 제8권2호
• /
• pp.79-92
• /
• 1985

Fertility has been declined since 1966 (see Table 1). This fertility reduction was duely caused by age at first marriage, induced abortion and contraceptive practice which has been largely increased in recent years. Although tbe proximate determinant such as induced abortion, age at marriage and breastfeeding can and do have an effect on fertility, the principal cause of the reduction in fertility in Korea during the fertility transition can be supported by correlation between level of fertility and contraceptive prevalence (See Fig. 4). Taking a regression equation between fertility (TER. Y) and prevalence level (X), the total fertility rate in 1984 was estimated as 1.9 and 2.1 based on lenear and expotential function shown as follow; $Y_1$=5.709-0.0549 X and $Y_2$_______80________ 1+e2.433+0.017X ($R^2$=O. 93) ($R^2$=0. 96) Where $Y_1$ and $Y_2$ denote total fertility rates obtained through two equations respectivelly. The peak of contraceptive prevalence was assumdd as 80 percent which is almost upper limit in human society. On the other hand, an observed value of 1984 fertility level obtained from five month period shows 2.1 which is coincident with logistic fitting after the adjustment of response error assumed around 10 to 20 percent, At any rate, fertility of Korean women will have been reached replacement level (2.1) by 1985.Thus policy for family planning program must be reviewed toward the direction of integrated approach particularly with MCH program inasmuch as fertility in Korea has already shown population replacement level that require more good quality of service in family planning and their There must be an advanced level of fertility in Korea because wide use of contraception and induced life abortion and age at marriage will effect modern fertility which shows up and down trend between 2.1 and 1.5 in general.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.157-171
• /
• 2021

스마트폰 보급과 ICT 기술을 발전에 따라 택시영업의 형태는 배회영업에서 플랫폼 기반 영업으로 변화해왔다. 이는 이용자의 이동성 및 접근성을 향상시키는 장점을 갖고 있지만 반대로 단거리 및 첨두수요 시간대의 간접 승차거부 등의 문제를 지속적으로 발생시키고 있다. 간접승차거부는 호출이 발생했을 때 이를 무시하고 수락하지 않는 경우를 의미하며 이를 개선할 필요가 있다. 이에 본 연구에서는 택시 운행 데이터를 통해 강화 학습 기반 호출 간 기대수익 조정 시뮬레이션을 수행하여 택시 수급의 불일치 완화 방안을 도출하고자 한다. 분석 결과 운행 완료율에 따라 인센티브 지급을 할 경우 평균 운행 완료율이 50.29%에서 54.24% 수준까지 증가함을 확인하였으며 5,000원 미만 단거리 구간에서 5.86%의 개선 효과를 도출하였다. 운행 완료율의 개선으로 운전자에게는 수익성 개선, 승객에게는 대기시간 감소의 편익을 줄 수 있을 것으로 기대되며, 택시 서비스 전반의 만족도 향상이 나타날 것으로 사료된다.

• Clinical and Experimental Pediatrics
• /
• 제64권2호
• /
• pp.68-75
• /
• 2021

The novel coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has been spreading worldwide since December 2019. Hundreds of cases of children and adolescents with Kawasaki disease (KD)-like hyperinflammatory illness have been reported in Europe and the United States during the peak of the COVID-19 pandemic with or without shock and cardiac dysfunction. These patients tested positive for the polymerase chain reaction or antibody test for SARS-CoV-2 or had a history of recent exposure to COVID-19. Clinicians managing such patients coined new terms for this new illness, such as COVID-19-associated hyperinflammatory response syndrome, pediatric inflammatory multisystem syndrome temporally associated with COVID-19, or COVID-19-associated multisystem inflammatory syndrome in children (MIS-C). The pathogenesis of MIS-C is unclear; however, it appears similar to that of cytokine storm syndrome. MIS-C shows clinical features similar to KD, but differences between them exist with respect to age, sex, and racial distributions and proportions of patients with shock or cardiac dysfunction. Recommended treatments for MIS-C include intravenous immunoglobulin, corticosteroids, and inotropic or vasopressor support. For refractory patients, monoclonal antibody to interleukin-6 receptor (tocilizumab), interleukin-1 receptor antagonist (anakinra), or monoclonal antibody to tumor necrosis factor (infliximab) may be recommended. Patients with coronary aneurysms require aspirin or anticoagulant therapy. The prognosis of MIS-C seemed favorable without sequelae in most patients despite a reported mortality rate of approximately 1.5%.

• 융합정보논문지
• /
• 제9권1호
• /
• pp.54-60
• /
• 2019

최근 기후변화로 인한 외부 열환경이 악화되고 있으며, 이로인한 건축물에너지사용량이 상승하고 있다. 기후변화 대응형 건축물 저에너지 기술 성능평가를 위하여 Energy Plus를 활용하였다. 실험군 유형은 기본건축물(Control)과 기화냉각시스템(EMS)이며, 유형별 분석결과를 비교하였다. 에너지성능평가결과 냉방피크부하는 Control 대비 EMS에서 약 9% 이상 저감률을 보였다. 단위면적당 연간 냉방부하는 Control 대비 EMS에서 약 17% 이상 저감률을 나타내었다. 단위면적당 연간 에너지사용량은 Control 대비 EMS에서 약 10% 이상 저감률을 보였다. 따라서 건축물 에너지저감기술로 기화냉각시스템의 효과는 양호한 것으로 판단되었으며, 향후 기화냉각시스템의 분사량 및 이격거리에 따른 건축물에너지성능평가 연구가 진행되어야 할 것이다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.456-462
• /
• 2019

ZnO thin-films are grown on a p-Si(111) substrate by RF sputtering. The effects of growth temperature and $O_2$ mixture ratio on the ZnO films are investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and room-temperature photoluminescence (PL) measurements. All the grown ZnO thin films show a strong preferred orientation along the c-axis, with an intense ultraviolet emission centered at 377 nm. However, when $O_2$ is mixed with the sputtering gas, the half width at half maximum (FWHM) of the XRD peak increases and the deep-level defect-related emission PL band becomes pronounced. In addition, an n-ZnO/p-Si heterojunction diode is fabricated by photolithographic processes and characterized using its current-voltage (I-V) characteristic curve and photoresponsivity. The fabricated n-ZnO/p-Si heterojunction diode exhibits typical rectifying I-V characteristics, with turn-on voltage of about 1.1 V and ideality factor of 1.7. The ratio of current density at ${\pm}3V$ of the reverse and forward bias voltage is about $5.8{\times}10^3$, which demonstrates the switching performance of the fabricated diode. The photoresponse of the diode under illumination of chopped with 40 Hz white light source shows fast response time and recovery time of 0.5 msec and 0.4 msec, respectively.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.315-328
• /
• 2019

This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.542-546
• /
• 2019

We investigate the characteristics of self-assembled quantum dot infrared photodetectors(QDIPs) based on doping level. Two kinds of QDIP samples are prepared using molecular beam epitaxy : $n^+-i(QD)-n^+$ QDIP with undoped quantum dot(QD) active region and $n^+-n^-(QD)-n^+$ QDIP containing Si direct doped QDs. InAs QDIPs were grown on semi-insulating GaAs (100) wafers by molecular-beam epitaxy. Both top and bottom contact GaAs layer are Si doped at $2{\times}10^{18}/cm^3$. The QD layers are grown by two-monolayer of InAs deposition and capped by InGaAs layer. For the $n^+-n^-(QD)-n^+$ structure, Si dopant is directly doped in InAs QD at $2{\times}10^{17}/cm^3$. Undoped and doped QDIPs show a photoresponse peak at about $8.3{\mu}m$, ranging from $6{\sim}10{\mu}m$ at 10 K. The intensity of the doped QDIP photoresponse is higher than that of the undoped QDIP on same temperature. Undoped QDIP yields a photoresponse of up to 50 K, whereas doped QDIP has a response of up to 30 K only. This result suggests that the doping level of QDs should be appropriately determined by compromising between photoresponsivity and operating temperature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5860-5876
• /
• 2018

A single snapshot data can only provide limited amount of information so that the rank of covariance matrix is not full, which is not adopted to complete the parameter estimation directly using the traditional super-resolution method. Aiming at solving the problem, a joint time delay and angle estimation using matrix pencil method based on information reconstruction vector for orthogonal frequency division multiplexing (OFDM) signal is proposed. Firstly, according to the channel frequency response vector of each array element, the algorithm reconstructs the vector data with delay and angle parameter information from both frequency and space dimensions. Then the enhanced data matrix for the extended array element is constructed, and the parameter vector of time delay and angle is estimated by the two-dimensional matrix pencil (2D MP) algorithm. Finally, the joint estimation of two-dimensional parameters is accomplished by the parameter pairing. The algorithm does not need a pseudo-spectral peak search, and the location of the target can be determined only by a single receiver, which can reduce the overhead of the positioning system. The theoretical analysis and simulation results show that the estimation accuracy of the proposed method in a single snapshot and low signal-to-noise ratio environment is much higher than that of Root Multiple Signal Classification algorithm (Root-MUSIC), and this method also achieves the higher estimation performance and efficiency with lower complexity cost compared to the one-dimensional matrix pencil algorithm.