• Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.16.1-16.10
• /
• 2020

This study was conducted in Lake Hayq between January and December 2018. The objectives of this study were to determine the growth, condition, sex ratio, fecundity, length at first sexual maturity (L₅₀), and spawning seasons of common carp (Cyprinus carpio). Monthly fish samples of C. carpio were collected using gillnets of stretched mesh sizes of 4, 6, 7, 8, 10, and 13 cm and beach seines of mesh size of 6 cm. Immediately after the fish were captured, total length (TL) and total weight (TW) for each individual were measured in centimeters and grams, respectively, and their relationship was determined using power function. Length at first maturity (L₅₀) was determined for both males and females using the logistic regression model. The spawning season was determined from the frequency of mature gonads and variation of gonadosomatic index (GSI) values of both males and females. Fecundity was analyzed from 67 mature female specimens. The length and weight relationship of C. carpio was TW = 0.015TL^2.93 for females and TW = 0.018TL^2.87 for males that indicate negative allometric growth in both cases. The mean Fulton condition factor (C_F) was 1.23 ± 0.013 for females and 1.21 ± 0.011 for males. The value of C_F in both cases was > 1 that shows both sexes are in good condition. Among the total 1055 C. carpio collected from Lake Hayq, 459 (43.5%) were females and 596 (56.5%) were males. The chi-square test showed that there was a significant deviation between male and female numbers from 1:1 ratio (χ²= 22, df = 11, P > 0.05) within sampling months. The length at first sexual maturity (L₅₀) for females and males were 21.5 and 17.5 cm, respectively. Males mature at smaller sizes than females. The spawning season of C. carpio was extended from February to April, and the peak spawning season for both sexes was in April. The average absolute fecundity was 28,100 ± 17,462. C. carpio is currently the commercially important fish while Nile tilapia fishery has declined in Lake Hayq. Therefore, this baseline data on growth, condition, and reproductive biology of common carp will be essential to understand the status of the population of carp and design appropriate management systems for the fish stock of Lake Hayq, Ethiopia, and adjacent countries.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.382-388
• /
• 2006

Physicochemical properties of chufa starch were investigated The result are summarized as follow: Moisture content crude protein and crude fat were 10.10%, 0.31% and 0.41,% respectively. Amylose content of chufa starch was 41.6% and blue value was 0.49. Lightness and whiteness of chufa starch was 96.36 and 92.23 of Hunter's color value. In iodine reaction, maximum absorbance wavelength (${\lambda}max$) was 628 nm. Water binding capacity was 83% and swelling power and solubility of chufa starch were increased slowly to $60^{\circ}C$, but increased rapidly after $60^{\circ}C$. Scanning election microscope(SEM) showed that granule type of chufa starch was round or elliptic type, and average granule size was $10{\mu}m$. The results by differential scanning calorimetry(DSC) revealed that gelatinization patterns were similar to those of potato or rice starch. In rapid viscoanalyzer(RVA) examination, pasting temperature was $79.95^{\circ}C$ and peak viscosity of chufa starch was 385.08.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.89-96
• /
• 2015

This paper presents a high efficiency, PSM/DCM/CCM triple mode boost DC-DC converter for mobile application. This device operates at Pulse-Skipping Mode(PSM) when it enters light load, and otherwise operate the operating frequency of 1.4MHz with Pulse-Width Modulation(PWM) mode. Especially in order to improve the efficiency during the Discontinuous-Conduction Mode(DCM) operation period, the reverse current prevention circuit and oscillations caused by the inductor and the parasitic capacitor to prevent the Ringing killer circuit is added. The input voltage of the boost converter ranges from 2.5V ~ 4.2V and it generates the output of 4.8V. The measurement results show that the boost converter provides a peak efficiency of 92% on CCM and 87% on DCM. And an efficiency-improving PWM operation raises the efficiency drop because of transition from PWM to PFM. The converter has been fabricated with a 0.18um Dongbu BCDMOS technology.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2011

We analysed ground motions form Mw 4.3 earthquake around Backryoung Island for the seismic source focal mechanism and horizontal response spectrum. Focal mechanism of the Backryoung Islands area was compared to existing principal stress orientation of the Korean Peninsula and horizontal response spectrum was also compared to those of the US NRC Regulatory Guide (1.60) and the Korean National Building Code. The ground motions of 3 stations, including vertical, radial, and tangential components for each station, were used for grid search method of moment tensor seismic source. The principal stress orientation from this study, ENE-WSW, is consistent fairly well with that of the Korean Peninsula. The horizontal response spectrum using 30 observed ground motions analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). Response spectrum of 30 horizontal ground motions were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal response spectrum revealed higher values for frequency bands above 3 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed higher values for the frequency bands below 0.8 second than the Korean Standard Response Spectrum (SD soil condition). However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the higher frequency bands.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.161-167
• /
• 2017

We have fabricated and characterized $32{\times}32$ photonic quantum ring (PQR) laser arrays uniformly operable with $0.98{\mu}A$ per ring at room temperature. The typical threshold current, threshold current density, and threshold voltage are 20 mA, $0.068A/cm^2$, and 1.38 V. The top surface emitting PQR array contains GaAs multiquantum well active regions and exhibits uniform characteristics for a chip of $1.65{\times}1.65mm^2$. The peak power wavelength is $858.8{\pm}0.35nm$, the relative intensity is $0.3{\pm}0.2$, and the linewidth is $0.2{\pm}0.07nm$. We also report the wavelength division multiplexing system experiment using angle-dependent blue shift characteristics of this laser array. This photonic quantum ring laser has angle-dependent multiple-wavelength radial emission characteristics over about 10 nm tuning range generated from array devices. The array exhibits a free space detection as far as 6 m with a function of the distance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.101-109
• /
• 2009

Generally, depth cache and pixel cache of 3D graphics are designed by using write-back scheme for efficient use of memory bandwidth. Also, there are write after read operations of same address or only write operations are occurred frequently in 3D graphics cache. If a cache miss is detected, an access to the external memory for write back operation and another access to the memory for handling the cache miss are operated simultaneously. So on frequent cache miss situations, as the memory access bandwidth limited, the access time of the external memory will be increased due to memory bottleneck problem. As a result, the total performance of the processor or the IP will be decreased, also the problem will increase peak power consumption. So in this paper, we proposed a novel early write back cache architecture so as to solve the problems issued above. The proposed architecture controls the point when to access the external memory as to copy the valid data block. And this architecture can improve the cache performance with same hit ratio and same capacity cache. As a result, the proposed architecture can solve the memory bottleneck problem by preventing intensive memory accesses. We have evaluated the new proposed architecture on 3D graphics z cache and pixel cache on a SoC environment where ARM11, 3D graphic accelerator and various IPs are embedded. The simulation results indicated that there were maximum 75% of performance increase when using various simulation vectors.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2014

Flip chip bonded LED packages possess lower thermal resistance than wire bonded LED packages because of short thermal path. In this study, thermal and bonding properties of flip chip bonded high brightness LED were evaluated for Au-Sn thermo-compression bonded LEDs and Sn-Ag-Cu reflow bonded LEDs. For the Au-Sn thermo-compression bonding, bonding pressure and bonding temperature were 50 N and 300oC, respectively. For the SAC solder reflow bonding, peak temperature was $255^{\circ}C$ for 30 sec. The shear strength of the Au-Sn thermo-compression joint was $3508.5gf/mm^2$ and that of the SAC reflow joint was 5798.5 gf/mm. After the shear test, the fracture occurred at the isolation layer in the LED chip for both Au-Sn and SAC joints. Thermal resistance of Au-Sn sample was lower than that of SAC bonded sample due to the void formation in the SAC solder.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.818-826
• /
• 2015

Recently, objective image quality assessment (IQA) methods that elaborately reflect the visual quality perception characteristics of human visual system (HVS) have actively been studied. Among those characteristics of HVS, luminance adaptation (LA) effect, indicating that HVS has different sensitivities depending on background luminance values to distortions, has widely been reflected into many existing IQA methods via Weber's law model. In this paper, we firstly reveal that the LA effect based on Weber's law model has inaccurately been reflected into the conventional IQA methods. To solve this problem, we firstly derive a new LA effect-based Local weight Function (LALF) that can elaborately reflect LA effect into IQA methods. We validate the effectiveness of our proposed LALF by applying LALF into SSIM (Structural SIMilarity) and PSNR methods. Experimental results show that the SSIM based on LALF yields remarkable performance improvement of 5% points compared to the original SSIM in terms of Spear rank order correlation coefficient between estimated visual quality values and measured subjective visual quality scores. Moreover, the PSNR (Peak to Signal Noise Ratio) based on LALF yields performance improvement of 2.5% points compared to the original PSNR.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.413-421
• /
• 2014

Desiccant cooling system is an air conditioning system that uses evaporative cooler to cool air and it can perform cooling by using heat energy only without electrically charged cooler. Thus, it can solve many problems of present cooling system including the destruction of ozone layer due to the use of CFC[chloro fluoro carbon] affiliated refrigerants and increase of peak power during summer season. In this study, cooling performance and exergy analysis was conducted in order to increase efficiency of desiccant cooling system. Especially, using exergy analysis based on the second law of thermodynamics can resolve the issue related to system efficiency in a more fundamental way by analyzing the cause of exergy destruction both in whole system and each component. The purpose of this study is to evaluate COP[coefficient of performance], cooling capacity and exergy performance of desiccant cooling system incorporating a regenerative evaporative cooler in various regeneration temperature and outdoor air conditions.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.