• 제목/요약/키워드: pattern completion

검색결과 122건 처리시간 0.036초

비만체형을 위한 기본 Bodice 원형연구 -중년기 부인을 중심으로- (A Study on the Basic Bodice Pattern for the Fatty Body -The subject of middle-aged women-)

  • 한애미
    • 대한가정학회지
    • /
    • 제25권3호
    • /
    • pp.15-26
    • /
    • 1987
  • The purpose of this study was to develop the pattern drafting method which would be suitable to their physical characteristics for the fatty body of 40∼55 aged Korean women who are more than 1.5 Rohrer's Index and 90㎝ bust girth. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women were measured on 29 items. Thirty-four items including 29 measured items and 5 calcutated items were analyzed statistically. 1) Mean, standard deviation, variance, maximum, minimum, range were computed. 2) Correlation coefficients between each items were computed. 2. Development of new bodice pattern drafting method: Measurement items necessary to draft new bodice pattern were bust girth, center back waist length, shoulder width, back width, chest and neck base girth. The new pattern was examined through three wearing tests for completion. 3. Evaluation of the new pattern drafting method: The new pattern was objectively evaluated by the sensory test. The sensory evaluation was applied to evaluate the new pattern for the fatty body women by comparint it with the conventional patterns. The results of sensory tests of the new pattern are as follows: 1) The composite reliability coefficient is 0.7698, and the reliability of sensory test shows high. 2) According to a statistical analysis of the result of the 23 items on the questionaire, all the items showed significant differences(α 0.01) between the two, with the new pattern having higher scores. The new pattern is better conventional pattern as the average mark of the former is 3.901 but that of latter is 2.926. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the center front neck point, shoulder point, side line, armscye depth, position of bust point, chest width line, under arm dart and the shoulder line.

  • PDF

크리스토퍼 알렉산더의 패턴언어 생성규칙에 관한 연구 (A Study on the Rule for Creation of the Pattern Language of Christopher Alexander)

  • 정성욱;김문덕
    • 한국실내디자인학회논문집
    • /
    • 제26권1호
    • /
    • pp.75-82
    • /
    • 2017
  • This study reviews the process of creating the patterns through the Christopher Alexander's books to discover the fundamental rules for creation of the pattern language. The essential ideas of 11 rules describing the characteristics of the pattern language are organized by keyword depending on the characteristics of each rule. Then, this study analyzes which keyword was applied importantly and how it had been developed chronologically in the Alexander's books. As a result, 5 keywords - reflection of cultural difference, reflection of human desires, solving the repeated problem, function suitable for principal purpose, and network structure - are applied to his early books in which the pattern language was theoretically developed, the pattern of traditional society was discovered and the network structure was developed. Another 5 keywords - user participation method, new problem solving, structure preserving transformation, post-mechanization method, and central invariant structure - are applied to the books in his mid-term after completion of the pattern theory which discover new pattern for contemporary society and apply the pattern language to time and space. In his later books which organize the theory of pattern language and suggest the direction for using the pattern language, 5 keywords - wholeness, post-mechanization method, user participation method, new problem solving, and structure preserving transformation - are applied. Users may use the pattern language more precisely if he/she considers the keywords of the early period in searching the patterns of existing environment, the keywords of the intermediate period in searching the patterns of new environment or in regard to time and space, and the keywords of the later period in considering direction of the application of the pattern language.

남자저고리 원형제도법 개발을 위한 연구(2) -깃구성을 중심으로- (A Study on the Basic Pattern Drafting Method Development of Men's J$\breve{o}$-go-ri -Collar Construction (2)-)

  • 정옥임
    • 대한가정학회지
    • /
    • 제37권7호
    • /
    • pp.17-27
    • /
    • 1999
  • According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.

  • PDF

Operating Properties of Resistive Superconducting fault Current Limiters with Various Pattern Shapes

  • Park, Hyo-Sang
    • 한국전기전자재료학회논문지
    • /
    • 제16권12S호
    • /
    • pp.1286-1291
    • /
    • 2003
  • Quench behavior of resistive superconducting fault current limiters (SFCLS) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spital shapes of identical line width, gap and margin. SFCLS were fabricated from YBCO thin films grown on two-inch diameter Al$_2$O$_3$ substrates under the same conditions. The total length of current limiting paths was the shortest at the spital shape due to its larger useless space. Inductance component of SFCLs with the spiral shape was around two times as high as those of other two shapes. This is not desirable since impedance characteristics of existing power systems can be changed. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, hi-spital shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

생활한옥의 평면구성에 관한 연구 - 전남지방을 중심으로 - (A Study on the Planning of Living-Hanok - Focused on Jeon-Nam Province -)

  • 이우원;강만호;주석중
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2008년 추계학술발표대회 논문집
    • /
    • pp.338-343
    • /
    • 2008
  • The purpose of this study was to analyze the characteristic of planning of Living-Hanok which bases on inherited and developed traditional lifestyle in Jeon-Nam province. After that arranged the characteristic in order which was divided by 9 items such as pattern of developed Hanok, type of floor plan, structure, pattern of using inside space, number of bedroom, the exist of private bathroom in the each bedroom or not, number of bathroom, the exist of storage space in the house or not, style of entrance and the exist of Utility Room or not. Additional, there was interview with resident who have been lived in Living-Hanok since after completion due to investigate resident's concerning of the Hanok. As a result, the last goal of analyze and interview is to presentation of more developed planing factors for Living-Hanok.

  • PDF

기계 및 화학적 가공법을 이용한 신 미세가공기술 (A Novel Micro-Machining Technique Using Mechanical and Chemical Methods)

  • 이재준;김대은
    • 대한기계학회논문집A
    • /
    • 제20권10호
    • /
    • pp.3113-3125
    • /
    • 1996
  • The objective of this study is to develop novel method named mechanical and chemical machining technique, which is capable of producing three dimensional patterns of few micrometers in dimension on a silicon wafer without the use of a mask. The strategy is to impart mechanical energy along the path of the pattern to be fabricated on a single crystal silicon by way on introdusing frictional interaction under controlled conditions. Then, the surface is preferentially etched to reveal the areas that have been mechanically energized. Upon completion of the etching process, the three dimensional pattern is produced on the silicon surface. Experiments have been conducted to identify the optimal tool material, geometery, as well as fabrication condition. The new technique introduced in this paper is significantly simpler than the conventional method which require sophisticated equipment and much time.

유방암 환자의 수술후 방사선치료의 부작용의 변화 : 유방절제술과 유방보존술의 비교 (Survey for the Side effects of Radiation Therapy Following Breast Cancer Surgery : Comparision of Modified Raidcal Mastectomy and Breast Conservative Surgery)

  • 전명희
    • 혜화의학회지
    • /
    • 제5권2호
    • /
    • pp.473-484
    • /
    • 1997
  • This study was performed to survey the specific information about the time of onset, frequency, duration, and severity of the side effect of radiation therapy following breast cancer surgery, and identify the difference of these data according to the type of breast cancer surgery : modified radical mastectomy(MRM) vs. breast consevative operation(BCO). 38 breast cancer patients were interviewed with side effect profile about radiation therapy. Interview was done weekley from the start of radiation therapy through 6 weeks and 3 month follow-up interview was done at 3 month after completion of the treatment. The results are as follow : 1. Total score of side effect experienced by the breast cancer patients was rapidly increased at 2-3 week after intiating treatement and continousely raised maintaing high score until completion of the treatement. Some problems like cough, dyspnea and pain were more experienced after treatment. 2. Patients with modified radical mastectomy showed more total score of side effects than patients with breast conservative operation. And both patients with MRM and BCO experienced similar pattern of side effect to radiation therapy. Through these data we concluded that side effect to radiation therapy was not ended at completion of treatement. Patents will continously experiend various problems and suffer from not only acute side effects like skin problem, sore throat and swollowing difficulty but also late effect of the radiation therapy. Clinically these data can be used for oncologic nurse to provide informational interventions to prepare breast cancer patients for the radiation therapy.

  • PDF

개선된 자원 평준화 기법을 활용한 적정 공기산정에 관한 연구 (Optimal Project Duration Estimation Through Enhanced Resource Leveling Technique)

  • 윤영상;김경환;김재준
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
    • /
    • pp.575-578
    • /
    • 2004
  • 건설프로젝트는 일정한 기간 동안 주어진 목표를 수행하기 위한 작업들의 모임이라 정의할 수 있으며, 이를 위해서는 필요한 자원의 효율적 계획 및 관리가 필요하고, 이때 자원배당 및 자원평준화 기법이 활용된다. 하지만 자원제약이 있는 자원배당과 공기 제한이 있는 자원평준화 방법은 하나의 프로젝트에 개별적으로 적용되고 있어 전체 프로젝트의 공기와 효율적 자원이용 측면에서 적정화하기는 어렵다. 따라서 본 연구는 자원 평준화 방법의 Minimum Moment Algorithm 개념을 확대 $\cdot$ 적용하여 적정 자원이용 및 공사기간을 산출하고자 한다. 이때 자원 활용의 상태를 나타내는 5가지 지표들 사이의 중요도는 AHP기법을 통해 파악한다.

  • PDF

유아의 어머니에 대한 애착과 자아개념 (Attachment and the Self-Concept in Early Childhood)

  • 정의영;최보가
    • 가정과삶의질연구
    • /
    • 제20권3호
    • /
    • pp.27-37
    • /
    • 2002
  • The Pattern of Young Child-Mother Attachment and the Self-Concept in Young Children. This work sheds light on the patterns of chi1dren's attachment to their mother and the self-concept of young children. Ninety-two participants were selected from kindergarten and nurseries in the city of Taegu. All the children were from 3 to 5 clears old. The measurement instruments were the attachment story completion task, created by Cassidy, and the self-concept test, designed and used by Bently and Yeatts. The data was analyzed by using frequencies, percentages, independent-samples t-test, one-way ANOVA, and the Scheffe test. The study's major findings are as follows: First, in the area of young child-mother attachments, the most common pattern was a secure attachment. The percentage of insecure-avoidant attachment was similar to that of the insecure-ambivalent attachment. Second, in terms of gender, there were no significant differences in self-concept among young children. Third, the self-concept held by young children varied significantly according to age. The younger the age, the more positive was the self-concept. Finally, the self-concept of children varied greatly according to the pattern of child-mother attachment. Those children who were more securely attacked to their mothers evidenced a more positive self-concept than those children who were insecurely attached to their mother.