• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1824-1827
• /
• 1997

Majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is influenced greatly by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and makes the high speed-high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2DOF planar robot, the conditions for the maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solutioin to the optimal path placement problem is proposed that minimizes the joint disturbance torque are examined. then, a solution to the optimal path placement problem is proposed that minimizes the joint disturbance torque during a straight line motion. the proposed method is illustrated using computer simulation. the proposed solution method cna be applied to the class of robots that are controlled by independent joint sevo control, which includes the vast majority of industrial robots. By minimizing the joint disturbacne torque during the motion, the simple joint servo controlled robot can move with improved path tracking accuracy at high speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.204-213
• /
• 1999

This paper suggests a numerical method of finding optimal geometric path and minimum-time motion for a manipulator arm. To find the minimum-time motion, the optimal geometric path is searched first, and the minimum-time motion is searched on this optimal path. In the algorithm finding optimal geometric path, the objective function is minimizing the combination of joint velocities, joint-jerks, and actuator forces as well as avoiding several static obstacles, where global search is performed by adjusting the seed points of the obstacle models. In the minimum-time algorithm, the traveling time is expressed by the linear combinations of finite-term quintic B-splines and the coefficients of the splines are obtained by nonlinear programming to minimize the total traveling time subject to the constraints of the velocity-dependent actuator forces. These two search algorithms are basically similar and their convergences are quite stable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.61-69
• /
• 2021

Recently, autonomous navigation technology is actively being developed due to the increasing demand of an unmanned surface vehicle(USV). Local planning is essential for the USV to safely reach its destination along paths. the dynamic window approach(DWA) algorithm is a well-known navigation scheme as a local path planning. However, the existing DWA algorithm does not consider path line tracking, and the fixed weight coefficient of the evaluation function, which is a core part, cannot provide flexible path planning for all situations. Therefore, in this paper, we propose a new DWA algorithm that can follow path lines in all situations. Fixed weight coefficients were trained using reinforcement learning(RL) which has been actively studied recently. We implemented the simulation and compared the existing DWA algorithm with the DWA algorithm proposed in this paper. As a result, we confirmed the effectiveness of the proposed algorithm.

• Journal of the Korean Society of Child Welfare
• /
• no.40
• /
• pp.255-283
• /
• 2012

The purpose of this study is to examine the pathways of factors that influence adolescent's suicidal ideation of suicide attempters and non-attempters and to compare path coefficients between the two groups. Results from simultaneous analysis of multiple populations suggest that the path model was appropriate for both groups. However, significant differences in path coefficients were found. Parental abuse and peer victimization had direct effects on adolescent's suicidal ideation only among the adolescent suicide non-attempters. Burdensomeness and hopelessness had direct effects on adolescent's suicidal ideation, whereas thwarted belongingness did not have direct effects for both groups. Peer victimization appear to have an indirect effect through burdensomeness for both groups of adolescents. Only among the adolescent suicide non-attempters, parental abuse had an indirect effect on suicidal ideation through burdensomeness, and burdensomeness and thwarted belongingness had indirect effects on suicidal ideation through hopelessness. The results indicate that differentiated approaches are required to prevent suicidal ideation for adolescent suicide attempters and non-attempters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1845-1865
• /
• 2019

Current Internet is designed by lots of service providers with different objects and policies which make the direct deployment of radically new architecture and protocols on Internet nearly impossible without reaching a consensus among almost all of them. Network virtualization is proposed to fend off this ossification of Internet architecture and add diversity to the future Internet. As an important part of network virtualization, virtual network embedding (VNE) problem has received more and more attention. In order to solve the problems of large embedding cost, low acceptance ratio (AR) and environmental adaptability in VNE algorithms, cognitive method is introduced to improve the adaptability to the changing environment and a cognitive virtual network embedding algorithm based on weighted relative entropy (WRE-CVNE) is proposed in this paper. At first, the weighted relative entropy (WRE) method is proposed to select the suitable substrate nodes and paths in VNE. In WRE method, the ranking indicators and their weighting coefficients are selected to calculate the node importance and path importance. It is the basic of the WRE-CVNE. In virtual node embedding stage, the WRE method and breadth first search (BFS) algorithm are both used, and the node proximity is introduced into substrate node ranking to achieve the joint topology awareness. Finally, in virtual link embedding stage, the CPU resource balance degree, bandwidth resource balance degree and path hop counts are taken into account. The path importance is calculated based on the WRE method and the suitable substrate path is selected to reduce the resource fragmentation. Simulation results show that the proposed algorithm can significantly improve AR and the long-term average revenue to cost ratio (LTAR/CR) by adjusting the weighting coefficients in VNE stage according to the network environment. We also analyze the impact of weighting coefficient on the performance of the WRE-CVNE. In addition, the adaptability of the WRE-CVNE is researched in three different scenarios and the effectiveness and efficiency of the WRE-CVNE are demonstrated.

• Journal of Industrial Convergence
• /
• v.19 no.1
• /
• pp.129-135
• /
• 2021

The purpose of this study was to examine the relationship between college students' health perception, health beliefs, and health promotion behaviors. For data analysis, item analysis, factor analysis, and reliability analysis were conducted. In addition, correlation analysis and path analysis were conducted to understand the relationship between variables. As a result of the analysis, the following conclusions were obtained. As a result of conducting path analysis to verify the causal effect between college students' health perception, health beliefs, and health promotion behaviors, the model was relatively high in various fitness indices, and all path coefficients included in the model were statistically significant. Specifically, there were significant positive relationships in all pathway coefficients, but health perception and perceived disability, perceived disability and health promotion behavior were negatively related. In subsequent studies, it is considered necessary to analyze various variables related to health promotion behavior.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.511-516
• /
• 2013

This paper presents a SDM using the FDPA technique. The FDPA technique is the added feedback path which is the delayed path of DAC output. The designed SDM increases the SNR by adding the delayed digital feedback path. The proposed SDM is easily implemented by eliminating the analog feedback path. Through the MATLAB modeling, the optimized coefficients are obtained to design the SDM. The designed SDM has a power consumption of $220{\mu}W$ and SNR(signal to noise ratio) of 81dB at the signal-bandwidth of 20KHz and sampling frequency of 2.56MHz. The SDM is designed using the $0.18{\mu}m$ standard CMOS process.

• Journal of Environmental Science International
• /
• v.27 no.11
• /
• pp.1073-1081
• /
• 2018

In this study, an operational data set was analysed by establishing a path model to figure out the actual cause-effect relationship of a wastewater treatment plant (WWTP); in particular, for the effluent concentrations of T-N and T-P. To develop the path models, data sets of operational records including effluent concentrations and operational factors were obtained from a field scale WWTP of $680,000m^3$ of treatment capacity. The models showed that the relationship networks with the correlation coefficients between variables for objective expressions indicated the strength of each relationship. The suggested path models were verified according to whether the analyzation results matched known theories well, but sophisticated minute theoric relationships could not be cropped out distinctly. This indicates that only a few paths with strong theoric casual relationships were represented as measured data due to the high non-linearity of the mechanism of the removal process in a biological wastewater treatment.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.83-89
• /
• 2019

This research describes quantitative effects of initial dispersion conditions upon the dispersion randomness of Magnus rotor bomblets. Ratios of the missile spin rate to the missile velocity, a, flight path angles, ${\gamma}$ and altitudes, h, were changed to investigate their effects on dispersion randomness. Dispersion was analyzed through calculation of 6 degree of freedom motion equation with aerodynamic coefficients from wind tunnel experiments. In order to analyze the randomness, regression analysis is adopted to calculate the coefficient of determination. The optimized ratio of the missile spin rate to the missile velocity and flight path angle were obtained and the dispersion altitudes had more effect on the dispersion diameter and had less effect on dispersion than other parameters.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3E
• /
• pp.43-46
• /
• 1998

Many of the active noise control system utilize a form of the least mean square(LMS) algorithm. This paper discusses the dependence of the convergence rate on the acoustic error path in the popular algorithm which is conventional "filtered-x LMS" and introduces new algorithm "constrained filtered-x LMS". The proposed method increase the convergence region regardless of the time-delay in the acoustic error path. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the control process become stationary. Advantages of constrained filtered-x LMS algorithm is illustrated by convergence analysis in the mean sense.