DOI QR코드

DOI QR Code

Study on the Effecting Factors for T-N and T-P Removal in Wastewater Treatment Plant using Path Model Approach

경로도형 구축을 통한 하수처리장 질소 및 인 제거 영향인자 파악에 관한 연구

  • Cho, Yeongdae (Department of Environmental Engineering, Catholic University of Pusan) ;
  • Lee, Seul-ah (Department of Environmental Engineering, Pusan National University) ;
  • Kim, Minsoo (Department of Environmental Engineering, Catholic University of Pusan) ;
  • Kim, Hyosoo (Environsoft Co., Ltd.) ;
  • Choi, Myungwon (Environsoft Co., Ltd.) ;
  • Kim, Yejin (Department of Environmental Engineering, Catholic University of Pusan)
  • 조영대 (부산가톨릭대학교 환경공학과) ;
  • 이슬아 (부산대학교 환경공학과) ;
  • 김민수 (부산가톨릭대학교 환경공학과) ;
  • 김효수 ((주)엔바이론소프트) ;
  • 최명원 ((주)엔바이론소프트) ;
  • 김예진 (부산가톨릭대학교 환경공학과)
  • Received : 2018.08.14
  • Accepted : 2018.10.01
  • Published : 2018.11.30

Abstract

In this study, an operational data set was analysed by establishing a path model to figure out the actual cause-effect relationship of a wastewater treatment plant (WWTP); in particular, for the effluent concentrations of T-N and T-P. To develop the path models, data sets of operational records including effluent concentrations and operational factors were obtained from a field scale WWTP of $680,000m^3$ of treatment capacity. The models showed that the relationship networks with the correlation coefficients between variables for objective expressions indicated the strength of each relationship. The suggested path models were verified according to whether the analyzation results matched known theories well, but sophisticated minute theoric relationships could not be cropped out distinctly. This indicates that only a few paths with strong theoric casual relationships were represented as measured data due to the high non-linearity of the mechanism of the removal process in a biological wastewater treatment.

Keywords

References

  1. Aguado, D., Rogen, C, 2008, Multivariate statistical monitoring of continuous wastewater treatment plants, Engineering Applications of Artificial Intelligence, 21, 1080-1091. https://doi.org/10.1016/j.engappai.2007.08.004
  2. Alvarez, D. G., Fuente, M. J., Vega, P., Sainz, G., 2009, Fault detection and diagnosis using multivariate statistical techniques in a wastewater treatment plant, Proceedings of 7th IFAC International Symposium on Advanced Control of Chemical Process.
  3. Durrenmatt, D. J., Gujer, W., 2012, Environmental Modelling & Software, 30, 47-56.
  4. Feng, H., Yi, Z., 2018, Joint analysis of input and parametric uncertainties in watershed water quality modeling: A formal Bayesian approach, Advances in Water Resources, 116, 77-94. https://doi.org/10.1016/j.advwatres.2018.04.006
  5. Franz, A., Nowak, O., Kroiss, H., 1996, Modeling WWTP treatment efficiency and relationship to receiving water quality, Wat. Sci. Technol., 33(12), 47-55. https://doi.org/10.1016/0273-1223(96)00456-8
  6. Kim, M., Kim, Y., Kim, H., Piao, W., Kim, C., 2016, Operator decision support system for integrated wastewater management including wastewater treatment plants and receiving water bodies, Environmental Science and Pollution Research, 23(11), 10785-10798. https://doi.org/10.1007/s11356-016-6272-6
  7. Lee, C. H., Moon, K. S., 2005, Statistical analysis of operating parameters on advanced wastewater treatment plant, J of Environmental Sciences, 14(2), 251-258. https://doi.org/10.5322/JES.2005.14.2.251
  8. Lee, D. J., Sun, S. W., 2007, Performance evaluation of WWTP based on reliability concept, J of KSEE, 29(3), 348-356.
  9. Leveque, J. G., Burns, R. C., 2017, A Structural Equation Modeling approach to water quality perceptions, J of Env Manage, 197(15), 440-447. https://doi.org/10.1016/j.jenvman.2017.04.024
  10. Moon, T. S., Kim, Y. J., Kim, J. R., Cha, J. H., Kim, D. H., Kim, C. W., 2009, Identification of process operating state with operational map in municipal wastewater treatment plant, Journal of Environmental Management, 90, 772-778.
  11. Moon, T. S., 2011, Development of decision support system for the operator of sewage treatment plant by the diagnosis of process operating state and the inference of reasons, Ph. D. Thesis, Pusan National University.
  12. Piovoso, M. J., Kosanovich, K. A., 1996, The use of multivariate statistics in process control, in: W.S. Levine(Ed.), The Control Handbook, CRC Press, Boca Raton, FL, 561-573.
  13. Raich, A., Cinar, A., 1996, Statistical process monitoring and disturbance diagnosis in multivariable continuous processes, AIchE Journal, 42(4), 995-1009. https://doi.org/10.1002/aic.690420412
  14. Shin, G. K., 2013, Structural Equation Modeling (SEM) with SPSS/AMOS 20., Chungram.
  15. Yeom, I. T., Chung, H. M., Yu, S. J., Kim, W. K., Kwon, O. S., Ahn, T. U., Son, D. H., Choi, I. C., 2014, A Study on the evaluation for operations of public sewage treatment plants uisng statistics technique, J of Korean Society on Water Environment, 30(5), 524-531. https://doi.org/10.15681/KSWE.2014.30.5.524
  16. Yoo, C. K., Vanrolleghem, P. A., Lee, I. B., 2006, Fault detection, monitoring and diagnosis of sequencing batch reactor for integrated wastewater treatment management system, Korean Society of Environmental Engineers, 11(2), 1-14.