• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.175-178
• /
• 1998

To analyze and design a motor magnetic permeance method and numerical methods such as F.E.M. are used. In this thesis, DC motor is analyzed and designed by the permeance method. Modified Carter coefficient and leakage permeance are presented. A magnetic flux path can be approximated properly by using a equivalent ${\pi}$ network representation adding the leakage coefficient. Finally, effective and easy-to-use program is realized. Experimental analysis and design with an actual motor proves that this program produces reliable results. There are many experimental coefficients in this algorithm and it makes some design errors. Using of this program, an motor engineer can obtain satisfactory characteristic and design value by inputting initial data at once.

• 농촌계획
• /
• 제26권1호
• /
• pp.77-88
• /
• 2020

This study had comparatively analyzed the influence factors of the farm village business on the local farmhouses centered on the level of importance and the level of performance. For this, a questionnaire survey had been conducted with 350 local residents who had participated in the Rural Field Forum of 14 villages, including Gyeongsangnam-do, Gyeongsangbuk-do, Chungcheongnam-do, Chungcheongbuk-do, Jeollabuk-do, etc. Excluding the insincere survey questionnaires, the final 232 people had been analyzed. As a result of the analysis of this study, the factors that have the influences on the diverse, rural areas had been compressed into the three factors of the lodging and the program, the special, rural area products, and the transportation and the accessibility. In the level of importance-level of performance analysis, it had been analyzed that the special, rural area products must maintain the continuity, that the transportation accessibility must avoid the excessive endeavor, and that the lodging program had a low priority order. Therefore, it can be said that it is necessary to concentrate the capability of the rural village business in the direction of developing the local specialties in the future. Next, after dividing the level of performance and the level of importance into the two groups each, the multiple group path analysis had been carried out. As a result, in the result of the analysis of the path that has an influence on the economic factor, the path coefficient of the level of importance of the transportation accessibility -> profit increase was 0.195+0.064 and the path coefficient of the level of performance of the transportation accessibility -> profit increase was 0.251+0.074. Therefore, both of them had the statistically significant amounts of the influences. This suggests that the transportation accessibility is an important element of the profit increase of the region. As a result, in the future, the research on the urban and rural exchanges using the even more convenient and inexpensive transportation means is needed. Most of them need the voluntary effort of the residents for being able to creatively develop and sell the native, agricultural, specialty products that are petty. Also, the rural areas need the diversities of the lodging programs and the recreational programs, a convenient reservation system, and the development of a unique tourism experience program. In the future, the researches that had been advanced in the even more detailed domain that is related to these factors are highly expected. Also, the analyses that had been carried out with even more areas and subjects as the targets are needed.

• 산업경영시스템학회지
• /
• 제40권2호
• /
• pp.78-91
• /
• 2017

In this study, we conducted a comparative study on user's perception and behavior on public system service (PSS) using institutionalism theory and MGA (multi-group analysis) methodology. In particular, this study focuses on how institutional isomorphism is applied to public system services and how MGA can be implemented correctly in a variance based SEM (structural equation model) such as PLS (partial least square). A data set of 496 effective responses was collected from pubic system users and an empirical research was conducted using three segmented models categorized by public proximity theory (public firms = 113, government contractors = 210, private contractors = 173). For rigorous group comparisons, each model was estimated by the same indicators and approaches. PLS-SEM was used in testing research hypotheses, followed by parametric and non-parametric PLS-MGA procedures in testing categorical moderation effects. This study applied novel procedures for testing composite measurement invariance prior to multi-group comparisons. The following main results and implications are drawn : 1) Partial measurement invariance was established. Multi-group analysis can be done by decomposed models although data can not be pooled for one integrated model. 2) Multi-group analysis using various approaches showed that proximity to public sphere moderated some hypothesized paths from quality dimensions to user satisfaction, which means that categorical moderating effects were partially supported. 3) Careful attention should be given to the selection of statistical test methods and the interpretation of the results of multi-group analysis, taking into account the different outcomes of the PLS-MGA test methods and the low statistical power of the moderating effect. It is necessary to use various methods such as comparing the difference in the path coefficient significance and the significance of the path coefficient difference between the groups. 4) Substantial differences in the perceptions and behaviors of PSS users existed according to proximity to public sphere, including the significance of path coefficients, mediation and categorical moderation effects. 5) The paper also provides detailed analysis and implication from a new institutional perspective. This study using a novel and appropriate methodology for performing group comparisons would be useful for researchers interested in comparative studies employing institutionalism theory and PLS-SEM multi-group analysis technique.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 지반조사위원회 봄 학술세미나
• /
• pp.37-46
• /
• 1998

Several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation by biezocone excess pore water dissipation test in soft clay deposits. However, depending on the assumptions and analytical techniques, the estimated coefficient of consolidation could be in a considerably wide range even for a specific degree of consolidation. These solutions are obtained from an initial excess porewater pressure distribution which can be determined from. either the cavity expansion theory or the strain path method. The 야ssipation of the initial excess porelvater pressure has been usally simulated by means of linear-uncoupled consolidation analysis and then the dissipation curve is normalized by the initial excess porewater pressure for easy use. However. since there is no guidelines or rules on which method gives the best solution for obtaining the coefficient of consolidation from the dissipation curve, the final selection was only based on engineer's extrience and Judgements. Thus, such an arbitrary selection might be inappropriate for a specific site to characterize the consolidation behavior. In this paper, we reviewed various theoretical time factors and, based on this consideration, we mentioned needs for researches in selecting a specific solution that is compatible for Korean clays. Also we listed some source of errors that can be encountered in the procedure of dissipation analysis.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1456-1463
• /
• 2022

The aim of this work is to study the radiation shielding properties of cement samples with waste glass incortated into its composition. The mass attenuation coefficient (MAC) of the samples were experimentally determined to evaluate their radiation shielding ability. The experimental coefficient was evaluated using NaI detector for gamma energies between 59.53 keV and 1408.01 keV using different radioactive point sources Am-241, Eu-152, Co-60, and Cs-137, and the gamma transmission parameters half-value layer, mean free path, and transmission factor were calculated. The theoretical coefficient of the composites was determined using Geant4 and XCOM software. The results were also compared against Geant4 and XCOM simulations by calculating the relative deviation between the values to determine the accuracy of the results. In addition the mechanical properties (including Compressive and porosity) as well as the thermogravimetric analysis were tested for the present samples. Overall, it was concluded that the cement sample with 50% waste glass has the greatest shielding potential for radiation shielding applications and is a useful way to reuse waste glass.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.307-313
• /
• 2023

This study conducts the flow analysis on the basis of the impeller RPM of water metering valve. The software used for the flow analysis is STAR-CCM+. In terms of the structure of the metering valve, it has an impeller installed inside, and a metering chamber has inlet and outlet holes. The flow analysis on the water metering valve drew the following conclusions: Regarding the flow field in the valve, the impeller had the highest velocity distribution, and complex flow field was generated in the metering chamber. In particular, since the path between the inlet and outlet holes in the metering chamber and the valve body was narrow, there was a section that had flow field interference. The flow rate and flow coefficient distribution according to the impeller RPM were on the linear increase. Given that, it showed the feature of the valve used for water metering on the basis of the impeller RPM.

• 한국수자원학회논문집
• /
• 제33권5호
• /
• pp.611-622
• /
• 2000

본 연구에서는 제주도 서귀포유역의 지하수 유동시스템 해석을 위해 MODFLOW 모델을 이용하였으며 양수량 측정자료를 통한 투수량계수 및 저류계수를 초기치로 선정하여 시행착오법을 통한 대상유역의 최종 매개변수를 얻을 수 있었고 모델의 모의 발생을 한 결과 지하수유동시스템에 대한 적용성이 잘 반영됨을 알 수 있었다. 서귀포 유역은 지형지질을 고려한 관측치 해석, 이(1996)의 연구결과 및 모의발생을 통한 결과로 볼 때 지하수두 분포는 표고 400m이내에서 안정된 지하수 함양에 의한 용출이 이루어지고 있는 것으로 판단된다. 또한, 부정류상태하에서 지하수 유동경로 해석을 위하여 수두분포의 결과치를 이용한 유속벡터 분석을 실시한 결과 유속벡터가 상대적으로 크게 나타난 지역은 II, III 및 Ⅵ지점이었으며 지하수 유동경로는 I, II, III, IV, V, Ⅵ 및 Ⅶ지점의 각 방향으로 분산되어 유출되고 있음을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.185-192
• /
• 2003

This study consolidation undrain Triaxial Compression Tests using constant confining pressure in clay that receive preconsolidation stress that is different and, void ratio, pore water pressure coefficient, shear strength compare with another thing theory and studied analyzing change relation of elastic modules. The summary of analysis is follows: If preconsolidation stress increases in same confining stress in relation of preconsolidation stress and deviator stress, deviator stress is proportional and increased. Can know that excess void pressure is proportional and decreases in size of preconsolidation stress in same confining stress state if preconsolidation stress increases preconsolidation stress and relation of excess void pressure. Also, over consolidated state can assume that this is thing by Dilatancy's effect though excess void pressure decreased remarkably. Preconsolidation stress and relation of stress path can know that shear strength degree increases preconsolidation stress increases, and specially, preconsolidation stress was appear in stress path form of overconsolidated state case of clay that receive at 300, 400, 500kPa in 100, 150kPa's deviator stress.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2007년도 6th OSONG INTERNATIONAL BIO-SYMPOSIUM
• /
• pp.234.2-234.2
• /
• 2007

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.381-387
• /
• 2023

This study conducts the flow analysis on the basis of the impeller RPM of water measuring valve and differential pressure at valve inlet and outlet. The software used for the flow analysis is STAR-CCM+. In terms of the structure of the measuring valve, it has an impeller installed inside, and a metering chamber has inlet and outlet holes. The flow analysis on the water measuring valve drew the following conclusions: The flow rate and flow coefficient distribution according to the impeller RPM and differential pressure were on the linear increase. Regarding the flow field in the valve, the increased differential pressure had the highest velocity distribution, and complex flow field was generated in the measuring chamber. In particular, since the path between the inlet and outlet holes in the measuring chamber and the valve body was narrow, there was a section that had flow field interference. Given that, it showed the feature of the valve used for water measuring on the basis of the impeller RPM.