• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.668-677
• /
• 1998

This paper is to verify the availability of the finite difference time domain (FDTD) method for the analysis of millimeter wave microstrip patch antenna. Using this method, the size of the microstrip patch antenna resonating at 32.153 GHz is optimized and the input impedance, the voltage standing wave ratio and the radiation pattern are calculated. The resonance frequencies of the microstrip patch antenna are calculated by MOM and FDTD method and then compared with the measured results, showing the difference of 12.27% and 1.27% respectively. Also, the bandwidth of this Ka-band patch antenna is about 8% which is similar to the case of X-band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.83-84
• /
• 2016

A wideband stacked patch antenna with parasitic elements, rectangular and triangle shaped patches, is proposed. Two different shaped parasitic elements are placed in the above of main rectangular microstrip patch antenna in order to achieve wide bandwidth for 860 MHz band. Coupling between the main patch and parasitic patches is realized by thick air gap. The gap and locations of parasitic patches are found to be the main factor of the wideband impedance matching. The proposed antenna is designed on a ground plane with small size of $119mm{\times}109mm$ for application of compact transceivers. And the impedance bandwidth of the antenna should satisfied CDMA band to the 780MHz~890MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.525-529
• /
• 2009

In this paper, microstrip patch antenna with diagonal slotted type using RFID is designed. This microstrip patch antenna is designed by considering the properties of critical parameter like the size, the truncating dimension, position of feed power and the height of airspace. the designed microstrip patch antenna has the lowest return loss in 915MHz, and in case of the voltage standing wave ratio(VSWR) is less than 1.2 under return loss -16dB, it has bandwidth of about 26MHz. Also, the microstrip patch antenna has the gain of 6dBi on the center frequency of 915MHz band and 2.8dB in the rate of reduction.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.119-126
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one path but multi-path. By the way, in machining, higher precision and the reduction of leading and machining time is required. But, for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2014

In this work, a compact patch antenna based on a low temperature cofired ceramic (LTCC) has been presented for V-band system-on-package (SoP) applications. In order to integrate it with transceiver block, a waveguide (W/G) to embedded microstrip line (eMSL) vertical transition was designed using slot-fed double stacked patch antennas for easy assembly and wide bandwidth. The $2{\times}2$ patch antenna integrating the transition was designed and fabricated in the 5-layer LTCC dielectrics. The whole size of the fabricated antenna including the $2{\times}2$ patches, transition and W/G was $20{\times}24{\times}5.39mm^3$. The fabricated antenna has achieved a 10 dB impedance bandwidth of 2.45 GHz from 61 to 63.45 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1294-1303
• /
• 1996

In this paper, the microstrip anntenna with broad bandwidth is designed using parasitic element. In the designed cofiguration, parasitic element of the same resonating length but different width which is coupled to the nonradiating edge of a rectangular patch antenna. The driven element aloe is fed and the other part is operated as parasitic element. So the different patchs are resonating at differnt frequencies and this multiple resonance increase the bandwidth. The overall size of the antenna is not increased by adding parasitic element to a driven patch. Compared to the available wideband microstrip antennas, the designed antenna structure is bery compact. A theoretical explanation of the rectangular patch antenna coupled with prarsitic is analyzed by extending the theory of coupled microstrip lines. The theoretical and experimental results for a patch coupled with a single parasitic are presented.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.625-628
• /
• 2003

In this paper, a wideband two-layer H-shaped microstrip antenna for WLAN is designed and studied experimentally. To increase the bandwidth of microstrip patch antenna, a configuration of stacked type using parastic element is used, Furthermore, to reduce the size of microstrip patch antenna, the first technique is H-shaped patch type. the second technique is that the main radiator and parastic patch are shorted to the ground plane using ten shorting posts. The antenna bandwidth and radiation characteristics are calculated by ENSEMBLE ver. 5.0 simulation software, and compared with the experimental results, Experimental results show that the return loss is less than -10dB over the band of 5.086GHz to 5.832GHz, which is quite good agreement with the calculations.

• Journal of Chest Surgery
• /
• v.22 no.1
• /
• pp.74-82
• /
• 1989

Ninety-six patients with tetralogy of Fallot have undergone either primary total correction [71], staged total correction [9], or an initial shunt [16], between January, 1984, and December, 1987 Their mean age was 9.5 years, mean body weight 24kg, and mean body surface area 0.86m2. Initial palliative shunt group had smaller size, smaller pulmonary artery, and higher hemoglobin [P value < 0.05 >. Modified Blalock-Taussig shunt was performed most commonly. Patch enlargement of right ventricle in 31 cases [38%], right ventricle and pulmonary artery in 7 cases [9%], transannular patch enlargement in 28 cases [35%], and valved conduit in 2 cases [2.5%] was performed for reconstruction of right ventricular outflow tract stenosis. Longer aorta cross clamp time was noted in case of separate patch enlargement of right ventricle and pulmonary artery, and dead patient with transannular patch enlargement [P value < 0.05]. There was no operative death in shunt group, but 7 deaths in total correction group [mortality rate 8.8%].

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.437-441
• /
• 2003

The major drawback of the classical microstrip patch antennas Is their narrow band characteristic from 1% to 5%. In this paper, to improve this drawback, we designed the antenna with stacked structure having one drive patch connected with feed line and four identical radiation patches. Resonance is achieved by adjust ing coupling area between one drive patch and four identical radiation patches and changing the size of drive patch or radial ion patches. Used substrate is FR4(${\epsilon}_r$=4.6 and t=1.6mm) and designed center frequency is 2.45GHz. The designed antenna has a wide bandwidth of 380Mhz form 2.333GHz to 2.713GHz(about 15.5%) including ISM band from 2.4GHz to 2.4835GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.581-585
• /
• 2013

A technique to expand the operating impedance bandwidth of a microstrip patch antenna is presented. The antenna is fed by a truncated T-shaped microstrip line on the ground plane with the rectangular slot. The proposed microstrip patch antenna offers wide bandwidth characteristics with the rectangular slot which has optimized size and position on the ground plane. The simulation result shows a fractional bandwidth of 127.8 %(0.65 to 2.95 GHz) at VSWR 2:1.